[PATCH v2 2/2] ARM: at91: remove phy fixup for sama5d3xek boards
From: Boris BREZILLON <hidden>
Date: 2014-06-26 10:14:18
Also in:
linux-arm-kernel, lkml
Subsystem:
arm port, arm/microchip (at91) soc support, the rest · Maintainers:
Russell King, Nicolas Ferre, Alexandre Belloni, Claudiu Beznea, Linus Torvalds
These board specific delays are now configured through micrel's specific DT bindings (see Documentation/devicetree/bindings/net/micrel-ksz9021.txt). Remove this phy fixup registration from sama5 DT machine file to keep it as generic as possible. Signed-off-by: Boris BREZILLON <redacted> --- arch/arm/mach-at91/board-dt-sama5.c | 22 ---------------------- 1 file changed, 22 deletions(-)
diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c
index d6fe04b..8c5814f 100644
--- a/arch/arm/mach-at91/board-dt-sama5.c
+++ b/arch/arm/mach-at91/board-dt-sama5.c@@ -35,30 +35,8 @@ static void __init sama5_dt_timer_init(void) at91sam926x_pit_init(); } -static int ksz9021rn_phy_fixup(struct phy_device *phy) -{ - int value; - - /* Set delay values */ - value = MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW | 0x8000; - phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value); - value = 0xF2F4; - phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value); - value = MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW | 0x8000; - phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value); - value = 0x2222; - phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value); - - return 0; -} - static void __init sama5_dt_device_init(void) { - if (of_machine_is_compatible("atmel,sama5d3xcm") && - IS_ENABLED(CONFIG_PHYLIB)) - phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, - ksz9021rn_phy_fixup); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); }
--
1.8.3.2