Re: [PATCH v4 3/5] net: ethernet: cpsw: introduce ti,am3352-cpsw compatible string

On 8/23/2013 10:58 PM, Santosh Shilimkar wrote:

On Friday 23 August 2013 01:24 PM, Daniel Mack wrote:

quoted

On 23.08.2013 19:19, Santosh Shilimkar wrote:

quoted

On Friday 23 August 2013 01:09 PM, Sekhar Nori wrote:

quoted

On 8/23/2013 10:26 PM, Santosh Shilimkar wrote:

quoted

quoted

quoted

So just stick the IP version or call it cpsw-v1... cpsw-v2 etc.

If this could be handled using IP version then the right way would be to
just read the IP version from hardware and use it. No need of DT property.

Thats fine as well but I thought the patch needed additional properties like
CM reg-address come from DT and hence the separate compatible. If you can
manage without that, thats even better.

We can't, that's the whole point :)

I saw that from the patch :)

quoted

Well, theoretically, we could for now, but that's not a clean solution.
Again: the problem here is that the control port is separated from the
cpsw core, and so we have to implement something specific for the AM3352
SoC. I know that's a violation of clean and generic driver ideas, but
there's no way we can assume that every cpsw v2 ip block has a control
port that is compatible to the one found on am335x chips.

But there is a possibility that other SOC will just use the same
control module approach. So using a revision IP is just fine. BTW,

But this is misleading because it makes appear like the same compatible
can be used on on another SoC like DRA7 which probably has the same
version of IP but a different control module implementation, when in
practice it cannot.

The fact is we are doing something SoC specific in the driver and we
cannot hide that behind IP versions. If really in practice there comes
another SoC with the same control module definition then it can always
use ti,am3352-cpsw compatible as well. The compatible name does not
preclude its usage.

Thanks,
Sekhar