Thread (21 messages) 21 messages, 2 authors, 2013-07-29

[net-next 11/12] e1000e: do not resume device from RPM suspend to read PHY status registers

flat view
STALE4831d SUPERSEDED: 1 (0M)

From: Jeff Kirsher <hidden>
Date: 2013-07-28 11:41:32
Subsystem: intel ethernet drivers, networking drivers, the rest · Maintainers: Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

Revision v1 of 102 in this series; 1 review trailer.

Revisions (102)
  1. v1
  2. v2 [diff vs current]
  3. v1
  4. v1
  5. v1
  6. v1
  7. v1
  8. v1
  9. v1
  10. v1
  11. v2 [diff vs current]
  12. v1
  13. v1
  14. v2 [diff vs current]
  15. v2 [diff vs current]
  16. v1
  17. v1
  18. v1
  19. v1
  20. v1
  21. v1
  22. v1
  23. v1
  24. v1
  25. v1
  26. v1
  27. v1
  28. v1
  29. v1
  30. v1
  31. v1
  32. v2 [diff vs current]
  33. v1
  34. v1
  35. v1
  36. v2 [diff vs current]
  37. v1
  38. v2 [diff vs current]
  39. v1
  40. v1
  41. v1
  42. v1
  43. v1
  44. v1
  45. v1
  46. v1
  47. v2 [diff vs current]
  48. v1
  49. v1 current
  50. v1
  51. v2 [diff vs current]
  52. v1
  53. v2 [diff vs current]
  54. v1
  55. v1
  56. v2 [diff vs current]
  57. v1
  58. v1
  59. v1
  60. v1
  61. v1
  62. v1
  63. v2 [diff vs current]
  64. v1
  65. v1
  66. v2 [diff vs current]
  67. v3 [diff vs current]
  68. v4 [diff vs current]
  69. v2 [diff vs current]
  70. v5 [diff vs current]
  71. v1
  72. v1
  73. v1
  74. v2 [diff vs current]
  75. v1
  76. v1
  77. v2 [diff vs current]
  78. v3 [diff vs current]
  79. v1
  80. v2 [diff vs current]
  81. v1
  82. v1
  83. v1
  84. v2 [diff vs current]
  85. v1
  86. v2 [diff vs current]
  87. v3 [diff vs current]
  88. v1
  89. v1
  90. v1
  91. v2 [diff vs current]
  92. v1
  93. v1
  94. v1
  95. v1
  96. v1
  97. v2 [diff vs current]
  98. v1
  99. v1
  100. v1
  101. v1
  102. v1 
From: Bruce Allan <redacted>

When the device is runtime suspended (e.g. when there is no link), do not
wake it from D3 to read the PHY status; just set the values to typical
power-on defaults as is done when runtime PM is not enabled and there is no
link.

Signed-off-by: Bruce Allan <redacted>
Tested-by: Aaron Brown <redacted>
Signed-off-by: Jeff Kirsher <redacted>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 650e569..e6d2c0f 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -4684,11 +4684,11 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
 	struct e1000_hw *hw = &adapter->hw;
 	struct e1000_phy_regs *phy = &adapter->phy_regs;
 
-	if ((er32(STATUS) & E1000_STATUS_LU) &&
+	if (!pm_runtime_suspended((&adapter->pdev->dev)->parent) &&
+	    (er32(STATUS) & E1000_STATUS_LU) &&
 	    (adapter->hw.phy.media_type == e1000_media_type_copper)) {
 		int ret_val;
 
-		pm_runtime_get_sync(&adapter->pdev->dev);
 		ret_val = e1e_rphy(hw, MII_BMCR, &phy->bmcr);
 		ret_val |= e1e_rphy(hw, MII_BMSR, &phy->bmsr);
 		ret_val |= e1e_rphy(hw, MII_ADVERTISE, &phy->advertise);
@@ -4699,7 +4699,6 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
 		ret_val |= e1e_rphy(hw, MII_ESTATUS, &phy->estatus);
 		if (ret_val)
 			e_warn("Error reading PHY register\n");
-		pm_runtime_put_sync(&adapter->pdev->dev);
 	} else {
 		/* Do not read PHY registers if link is not up
 		 * Set values to typical power-on defaults
-- 
1.7.11.7
Other recent patches touching these files
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help