From: Akeem G Abodunrin <redacted>

If pf_reset failed, it becomes necessary to clear recovery pending bit, instead
of falling through the setup process.

Change-ID: Ic1611e6a32741fe3a2782ec7be173cb65e7492ed
Signed-off-by: Akeem G Abodunrin <redacted>
Tested-by: Jim Young <redacted>
Signed-off-by: Jeff Kirsher <redacted>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 239a2ea..cef3db4 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c

@@ -5367,8 +5367,10 @@ static void i40e_reset_and_rebuild(struct i40e_pf *pf, bool reinit)
 	 * because the reset will make them disappear.
 	 */
 	ret = i40e_pf_reset(hw);
-	if (ret)
+	if (ret) {
 		dev_info(&pf->pdev->dev, "PF reset failed, %d\n", ret);
+		goto end_core_reset;
+	}
 	pf->pfr_count++;
 
 	if (test_bit(__I40E_DOWN, &pf->state))

-- 
1.9.3