[net-next 10/15] i40e/i40evf: Change type to u32 to avoid sparse error
From: Jeff Kirsher <hidden>
Date: 2014-05-29 15:10:37
Subsystem:
intel ethernet drivers, networking drivers, the rest · Maintainers:
Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Greg Rose <redacted> tx_lpi_status and rx_lpi_status are declared as bool but then used in sizeof operations in the CORE driver code. Make them u32 to make sparse be quiet. Change-ID: Iad6daeb1c7149e61ece242acd18c64b320c246a3 Signed-off-by: Greg Rose <redacted> Tested-by: Jim Young <redacted> Signed-off-by: Jeff Kirsher <redacted> --- drivers/net/ethernet/intel/i40e/i40e_type.h | 4 ++-- drivers/net/ethernet/intel/i40evf/i40e_type.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_type.h b/drivers/net/ethernet/intel/i40e/i40e_type.h
index 0fe158c..71f9718 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_type.h@@ -1016,8 +1016,8 @@ struct i40e_hw_port_stats { u64 mac_short_packet_dropped; /* mspdc */ u64 checksum_error; /* xec */ /* EEE LPI */ - bool tx_lpi_status; - bool rx_lpi_status; + u32 tx_lpi_status; + u32 rx_lpi_status; u64 tx_lpi_count; /* etlpic */ u64 rx_lpi_count; /* erlpic */ };
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_type.h b/drivers/net/ethernet/intel/i40evf/i40e_type.h
index c854cca..67082f7 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_type.h@@ -1016,8 +1016,8 @@ struct i40e_hw_port_stats { u64 mac_short_packet_dropped; /* mspdc */ u64 checksum_error; /* xec */ /* EEE LPI */ - bool tx_lpi_status; - bool rx_lpi_status; + u32 tx_lpi_status; + u32 rx_lpi_status; u64 tx_lpi_count; /* etlpic */ u64 rx_lpi_count; /* erlpic */ };
--
1.9.3