[PATCH 1/5] ARM: OMAP2+: gpmc: Fix kernel BUG for DT boot mode

From: hvaibhav@ti.com <redacted>

With recent changes in omap gpmc driver code, in case of DT
boot mode, where bootloader does not configure gpmc cs space
will result into kernel BUG() inside gpmc_mem_init() function,
as gpmc cs0 gpmc_config7[0].csvalid bit is set to '1' and
gpmc_config7[0].baseaddress is set to '0' on reset.

This use-case is applicable for any board/EVM which doesn't have
any peripheral connected to gpmc cs0, for example BeagleXM and
BeagleBone, so DT boot mode fails.

This patch adds of_have_populated_dt() check before creating
device, so that for DT boot mode, gpmc probe will not be called
which is expected behavior, as gpmc is not supported yet from DT.

Signed-off-by: Vaibhav Hiremath <redacted>
Cc: Afzal Mohammed <redacted>
Cc: Tony Lindgren <tony@atomide.com>
Cc Paul Walmsley [off-list ref]
---
 arch/arm/mach-omap2/gpmc.c |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 5ac5cf3..90b033e 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c

@@ -981,6 +981,10 @@ static int __init omap_gpmc_init(void)
 	struct platform_device *pdev;
 	char *oh_name = "gpmc";
 
+	/* If dtb is there, the devices will be created dynamically */
+	if (of_have_populated_dt())
+		return -ENODEV;
+
 	oh = omap_hwmod_lookup(oh_name);
 	if (!oh) {
 		pr_err("Could not look up %s\n", oh_name);

-- 
1.7.2.5