RE: alignment faults in 3.6
flat view
From: David Laight <hidden>
Date: 2012-10-11 08:21:35
Also in:
linux-arm-kernel
-----Original Message----- From: netdev-owner@vger.kernel.org [mailto:netdev-owner@vger.kernel.org] On Behalf Of Måns Rullgård Sent: 11 October 2012 03:27 To: Jon Masters Cc: linux-arm-kernel@lists.infradead.org; netdev@vger.kernel.org Subject: Re: alignment faults in 3.6 Jon Masters [off-list ref] writes:quoted
Hi everyone, On 10/05/2012 10:33 AM, Rob Herring wrote:quoted
On 10/05/2012 09:05 AM, Russell King - ARM Linux wrote:quoted
On Fri, Oct 05, 2012 at 07:24:44AM -0500, Rob Herring wrote:quoted
On 10/05/2012 03:24 AM, Russell King - ARM Linux wrote:quoted
Does it matter? I'm just relaying the argument against adding __packed which was used before we were forced (by the networking folk) to implement the alignment fault handler.It doesn't really matter what will be accepted or not as adding __packed to struct iphdr doesn't fix the problem anyway.
...
There are exactly two possible solutions: 1. Change the networking code so those structs are always aligned. This might not be (easily) possible. 2. Mark the structs __packed and fix any typecasts like the ones seen in this thread. This will have an adverse effect in cases where the structs are in fact aligned. Both solutions lie squarely in the networking code. It's time to involve that list, or we'll never get anywhere.
It might be enough to use __attribute__((aligned(2))) on some structure members (actually does 'ldm' need 8 byte alignment?? - in which case aligned(4) is enough). One on my bugbears is hardware that will once receive ethernet frames onto a 4n boundary - it needs to be 4n+2. two bytes of 'junk' will do. David