Hi Peppe,
On Tue, May 22, 2012 at 8:51 PM, Giuseppe CAVALLARO
[off-list ref] wrote:
On 5/22/2012 9:38 AM, Bob Liu wrote:
quoted
Module can't be compiled and installed in current Makefile.
I've just seen that I can generate the stmmac.ko on ARM and also on x86
with my configuration.
Can you post here you build failure?
In the meantime I'll test the module on ARM soon.
Yes, stmmac.ko can be generated, but stmmac_platform.c won't be built.
which cause net device can't be probed.
peppe
quoted
Signed-off-by: Bob Liu <redacted>
---
drivers/net/ethernet/stmicro/stmmac/Makefile | 12 ++++++------
1 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index bc965ac..4b50922 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
obj-$(CONFIG_STMMAC_ETH) += stmmac.o
-stmmac-$(CONFIG_STMMAC_TIMER) += stmmac_timer.o
-stmmac-$(CONFIG_STMMAC_RING) += ring_mode.o
-stmmac-$(CONFIG_STMMAC_CHAINED) += chain_mode.o
-stmmac-$(CONFIG_STMMAC_PLATFORM) += stmmac_platform.o
-stmmac-$(CONFIG_STMMAC_PCI) += stmmac_pci.o
+stmmac-$(CONFIG_STMMAC_TIMER:m=y) += stmmac_timer.o
+stmmac-$(CONFIG_STMMAC_RING:m=y) += ring_mode.o
+stmmac-$(CONFIG_STMMAC_CHAINED:m=y) += chain_mode.o
+stmmac-$(CONFIG_STMMAC_PLATFORM:m=y) += stmmac_platform.o
+stmmac-$(CONFIG_STMMAC_PCI:m=y) += stmmac_pci.o
stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o \
dwmac_lib.o dwmac1000_core.o dwmac1000_dma.o \
dwmac100_core.o dwmac100_dma.o enh_desc.o norm_desc.o \
- mmc_core.o $(stmmac-y)
+ mmc_core.o
--
Thanks,
--Bob