On 5/22/2012 9:38 AM, Bob Liu wrote:
Module can't be compiled and installed in current Makefile.
I've just seen that I can generate the stmmac.ko on ARM and also on x86
with my configuration.
Can you post here you build failure?
In the meantime I'll test the module on ARM soon.
peppe
quoted hunk ↗ jump to hunk
Signed-off-by: Bob Liu <redacted>
---
drivers/net/ethernet/stmicro/stmmac/Makefile | 12 ++++++------
1 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index bc965ac..4b50922 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -1,10 +1,10 @@
obj-$(CONFIG_STMMAC_ETH) += stmmac.o
-stmmac-$(CONFIG_STMMAC_TIMER) += stmmac_timer.o
-stmmac-$(CONFIG_STMMAC_RING) += ring_mode.o
-stmmac-$(CONFIG_STMMAC_CHAINED) += chain_mode.o
-stmmac-$(CONFIG_STMMAC_PLATFORM) += stmmac_platform.o
-stmmac-$(CONFIG_STMMAC_PCI) += stmmac_pci.o
+stmmac-$(CONFIG_STMMAC_TIMER:m=y) += stmmac_timer.o
+stmmac-$(CONFIG_STMMAC_RING:m=y) += ring_mode.o
+stmmac-$(CONFIG_STMMAC_CHAINED:m=y) += chain_mode.o
+stmmac-$(CONFIG_STMMAC_PLATFORM:m=y) += stmmac_platform.o
+stmmac-$(CONFIG_STMMAC_PCI:m=y) += stmmac_pci.o
stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o \
dwmac_lib.o dwmac1000_core.o dwmac1000_dma.o \
dwmac100_core.o dwmac100_dma.o enh_desc.o norm_desc.o \
- mmc_core.o $(stmmac-y)
+ mmc_core.o