Thread (24 messages) flat view 24 messages, 5 authors, 2012-02-13
STALE5301d

Revision v3 of 2 in this series.

Revisions (2)
  1. v2 [diff vs current]
  2. v3 current

[PATCH v3 05/16] e100: Support sending custom Ethernet CRC

From: <hidden>
Date: 2012-02-11 01:05:33
Subsystem: intel ethernet drivers, networking drivers, the rest · Maintainers: Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

From: Ben Greear <redacted>

This can aid with testing the RX logic for bad
CRCs.

Signed-off-by: Ben Greear <redacted>
---
:100644 100644 1fd4603... 249ca59... M	drivers/net/ethernet/intel/e100.c
 drivers/net/ethernet/intel/e100.c |   16 ++++++++++++++++
 1 files changed, 16 insertions(+), 0 deletions(-)
diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index 1fd4603..249ca59 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -412,6 +412,10 @@ enum cb_status {
 	cb_ok       = 0x2000,
 };
 
+/**
+ * cb_command - Command Block flags
+ * @cb_tx_nc:  0: controler does CRC (normal),  1: CRC from skb memory
+ */
 enum cb_command {
 	cb_nop    = 0x0000,
 	cb_iaaddr = 0x0001,
@@ -421,6 +425,7 @@ enum cb_command {
 	cb_ucode  = 0x0005,
 	cb_dump   = 0x0006,
 	cb_tx_sf  = 0x0008,
+	cb_tx_nc  = 0x0010,
 	cb_cid    = 0x1f00,
 	cb_i      = 0x2000,
 	cb_s      = 0x4000,
@@ -1724,6 +1729,16 @@ static void e100_xmit_prepare(struct nic *nic, struct cb *cb,
 	struct sk_buff *skb)
 {
 	cb->command = nic->tx_command;
+
+	/*
+	 * Use the last 4 bytes of the SKB payload packet as the CRC, used for
+	 * testing, ie sending frames with bad CRC.
+	 */
+	if (unlikely(skb->no_fcs))
+		cb->command |= __constant_cpu_to_le16(cb_tx_nc);
+	else
+		cb->command &= ~__constant_cpu_to_le16(cb_tx_nc);
+
 	/* interrupt every 16 packets regardless of delay */
 	if ((nic->cbs_avail & ~15) == nic->cbs_avail)
 		cb->command |= cpu_to_le16(cb_i);
@@ -2777,6 +2792,7 @@ static int __devinit e100_probe(struct pci_dev *pdev,
 		return -ENOMEM;
 
 	netdev->hw_features |= NETIF_F_RXFCS;
+	netdev->priv_flags |= IFF_SUPP_NOFCS;
 
 	netdev->netdev_ops = &e100_netdev_ops;
 	SET_ETHTOOL_OPS(netdev, &e100_ethtool_ops);
-- 
1.7.3.4
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help