Re: [PATCH v2 3/3] net/fec: add imx6q enet support
flat view
STALE5509d
SUPERSEDED
From: Shawn Guo <hidden>
Date: 2011-09-21 11:28:43
Also in:
linux-arm-kernel
Revision v2 of 16 in this series.
Revisions (16)
On Wed, Sep 21, 2011 at 08:07:42AM -0300, Fabio Estevam wrote:
On Wed, Sep 21, 2011 at 8:10 AM, Shawn Guo [off-list ref] wrote: ...quoted
diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig index 4dbe41f..1cf6716 100644 --- a/drivers/net/ethernet/freescale/Kconfig +++ b/drivers/net/ethernet/freescale/Kconfig@@ -7,7 +7,7 @@ config NET_VENDOR_FREESCALEdefault y depends on FSL_SOC || QUICC_ENGINE || CPM1 || CPM2 || PPC_MPC512x || \ M523x || M527x || M5272 || M528x || M520x || M532x || \ - IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC || \ + ARCH_MXC || ARCH_MXS || \Do you need to get rid of IMX_HAVE_PLATFORM_FEC and MXS_HAVE_PLATFORM_FEC?
Yes, I do. We are moving to device tree, so the Kconfig symbol IMX_HAVE_PLATFORM_FEC makes no sense any more, as the platform device registration will be done by DT core according whether there is a FEC node in device tree or not.
By doing that you are selecting FEC for SoCs that don´t have this module such as MX1/MX21/MX31.
No. By doing that, FEC will not be selected for any SoCs by default. You need to select it explicitly if you are building a platform with FEC support. -- Regards, Shawn