[PATCH v2 0/3] add fec support for imx6q

This series adds imx6q enet support.  The imx6q enet is a derivative of
imx28 enet controller.  It fixed the frame endian issue found on imx28,
and added 1 Gbps support.

Changes since v1:
 * Fix typo pointed out by Francois Romieu
 * Drop patch #3 in the v1
 * Rebase on net-next tree

Thanks.

Shawn Guo (3):
      net/fec: change phy-reset-gpio request warning to debug message
      net/fec: fix fec1 check in fec_enet_mii_init()
      net/fec: add imx6q enet support

 drivers/net/ethernet/freescale/Kconfig |    9 ++--
 drivers/net/ethernet/freescale/fec.c   |   65 +++++++++++++++++++++++++-------
 2 files changed, 55 insertions(+), 19 deletions(-)