---
 MAINTAINERS                               |    2 +-
 drivers/net/Kconfig                       |   46 --------------------
 drivers/net/Makefile                      |    1 -
 drivers/net/ethernet/Kconfig              |    1 +
 drivers/net/ethernet/Makefile             |    1 +
 drivers/net/ethernet/adi/Kconfig          |   65 +++++++++++++++++++++++++++++
 drivers/net/ethernet/adi/Makefile         |    5 ++
 drivers/net/{ => ethernet/adi}/bfin_mac.c |    0
 drivers/net/{ => ethernet/adi}/bfin_mac.h |    0
 9 files changed, 73 insertions(+), 48 deletions(-)
 create mode 100644 drivers/net/ethernet/adi/Kconfig
 create mode 100644 drivers/net/ethernet/adi/Makefile
 rename drivers/net/{ => ethernet/adi}/bfin_mac.c (100%)
 rename drivers/net/{ => ethernet/adi}/bfin_mac.h (100%)

diff --git a/MAINTAINERS b/MAINTAINERS
index a91e8fb..83a51ad 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS

@@ -1440,7 +1440,7 @@ BLACKFIN EMAC DRIVER

 L:     uclinux-dist-devel@blackfin.uclinux.org
 W:     http://blackfin.uclinux.org
 S:     Supported
-F:     drivers/net/bfin_mac.*
+F:     drivers/net/ethernet/adi/

 BLACKFIN RTC DRIVER
 M:     Mike Frysinger [off-list ref]

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 61e71d0..bb4bc4b 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig

@@ -252,52 +252,6 @@ config SH_ETH

         This driver supporting CPUs are:
               - SH7710, SH7712, SH7763, SH7619, SH7724, and SH7757.

-config BFIN_MAC
-       tristate "Blackfin on-chip MAC support"
-       depends on NET_ETHERNET && (BF516 || BF518 || BF526 || BF527 || BF536 || BF537)
-       select CRC32
-       select MII
-       select PHYLIB
-       select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
-       help
-         This is the driver for Blackfin on-chip mac device. Say Y if you want it
-         compiled into the kernel. This driver is also available as a module
-         ( = code which can be inserted in and removed from the running kernel
-         whenever you want). The module will be called bfin_mac.
-
-config BFIN_MAC_USE_L1
-       bool "Use L1 memory for rx/tx packets"
-       depends on BFIN_MAC && (BF527 || BF537)
-       default y
-       help
-         To get maximum network performance, you should use L1 memory as rx/tx buffers.
-         Say N here if you want to reserve L1 memory for other uses.
-
-config BFIN_TX_DESC_NUM
-       int "Number of transmit buffer packets"
-       depends on BFIN_MAC
-       range 6 10 if BFIN_MAC_USE_L1
-       range 10 100
-       default "10"
-       help
-         Set the number of buffer packets used in driver.
-
-config BFIN_RX_DESC_NUM
-       int "Number of receive buffer packets"
-       depends on BFIN_MAC
-       range 20 100 if BFIN_MAC_USE_L1
-       range 20 800
-       default "20"
-       help
-         Set the number of buffer packets used in driver.
-
-config BFIN_MAC_USE_HWSTAMP
-       bool "Use IEEE 1588 hwstamp"
-       depends on BFIN_MAC && BF518
-       default y
-       help
-         To support the IEEE 1588 Precision Time Protocol (PTP), select y here
-
 config NET_NETX
       tristate "NetX Ethernet support"
       select MII

diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 8e6dbd7..d249d76 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile

@@ -57,7 +57,6 @@ obj-$(CONFIG_EQUALIZER) += eql.o

 obj-$(CONFIG_TUN) += tun.o
 obj-$(CONFIG_VETH) += veth.o
 obj-$(CONFIG_NET_NETX) += netx-eth.o
-obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
 obj-$(CONFIG_DM9000) += dm9000.o
 obj-$(CONFIG_ENC28J60) += enc28j60.o
 obj-$(CONFIG_ETHOC) += ethoc.o

diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 6b3b3dc..e087337 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig

@@ -15,6 +15,7 @@ source "drivers/net/ethernet/3com/Kconfig"

 source "drivers/net/ethernet/amd/Kconfig"
 source "drivers/net/ethernet/apple/Kconfig"
 source "drivers/net/ethernet/atheros/Kconfig"
+source "drivers/net/ethernet/adi/Kconfig"
 source "drivers/net/ethernet/broadcom/Kconfig"
 source "drivers/net/ethernet/brocade/Kconfig"
 source "drivers/net/ethernet/chelsio/Kconfig"

diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 2a1cbce..826db27 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile

@@ -7,6 +7,7 @@ obj-$(CONFIG_NET_VENDOR_8390) += 8390/

 obj-$(CONFIG_NET_VENDOR_AMD) += amd/
 obj-$(CONFIG_NET_VENDOR_APPLE) += apple/
 obj-$(CONFIG_NET_VENDOR_ATHEROS) += atheros/
+obj-$(CONFIG_NET_BFIN) += adi/
 obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
 obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
 obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/

diff --git a/drivers/net/ethernet/adi/Kconfig b/drivers/net/ethernet/adi/Kconfig
new file mode 100644
index 0000000..a2c8a3b
--- /dev/null
+++ b/drivers/net/ethernet/adi/Kconfig

@@ -0,0 +1,65 @@
+#
+# Blackfin device configuration
+#
+
+config NET_BFIN
+       bool "Blackfin devices"
+       depends on BF516 || BF518 || BF526 || BF527 || BF536 || BF537
+       ---help---
+         If you have a network (Ethernet) card belonging to this class, say Y.
+         Make sure you know the name of your card. Read the Ethernet-HOWTO,
+         available from <http://www.tldp.org/docs.html#howto>.
+
+         If unsure, say Y.
+
+         Note that the answer to this question doesn't directly affect the
+         kernel: saying N will just cause the configurator to skip all
+         the remaining Blackfin card questions. If you say Y, you will be
+         asked for your specific card in the following questions.
+
+config BFIN_MAC
+       tristate "Blackfin on-chip MAC support"
+       depends on NET_BFIN && (BF516 || BF518 || BF526 || BF527 || \
+                BF536 || BF537)
+       select CRC32
+       select MII
+       select PHYLIB
+       select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
+       ---help---
+         This is the driver for Blackfin on-chip mac device. Say Y if you want
+         it compiled into the kernel. This driver is also available as a
+         module ( = code which can be inserted in and removed from the running
+         kernel whenever you want). The module will be called bfin_mac.
+
+config BFIN_MAC_USE_L1
+       bool "Use L1 memory for rx/tx packets"
+       depends on BFIN_MAC && (BF527 || BF537)
+       default y
+       ---help---
+         To get maximum network performance, you should use L1 memory as rx/tx
+         buffers. Say N here if you want to reserve L1 memory for other uses.
+
+config BFIN_TX_DESC_NUM
+       int "Number of transmit buffer packets"
+       depends on BFIN_MAC
+       range 6 10 if BFIN_MAC_USE_L1
+       range 10 100
+       default "10"
+       ---help---
+         Set the number of buffer packets used in driver.
+
+config BFIN_RX_DESC_NUM
+       int "Number of receive buffer packets"
+       depends on BFIN_MAC
+       range 20 100 if BFIN_MAC_USE_L1
+       range 20 800
+       default "20"
+       ---help---
+         Set the number of buffer packets used in driver.
+
+config BFIN_MAC_USE_HWSTAMP
+       bool "Use IEEE 1588 hwstamp"
+       depends on BFIN_MAC && BF518
+       default y
+       ---help---
+         To support the IEEE 1588 Precision Time Protocol (PTP), select y here

diff --git a/drivers/net/ethernet/adi/Makefile b/drivers/net/ethernet/adi/Makefile
new file mode 100644
index 0000000..b1fbe19
--- /dev/null
+++ b/drivers/net/ethernet/adi/Makefile

@@ -0,0 +1,5 @@
+#
+# Makefile for the Blackfin device drivers.
+#
+
+obj-$(CONFIG_BFIN_MAC) += bfin_mac.o

diff --git a/drivers/net/bfin_mac.c b/drivers/net/ethernet/adi/bfin_mac.c
similarity index 100%
rename from drivers/net/bfin_mac.c
rename to drivers/net/ethernet/adi/bfin_mac.c
diff --git a/drivers/net/bfin_mac.h b/drivers/net/ethernet/adi/bfin_mac.h
similarity index 100%
rename from drivers/net/bfin_mac.h
rename to drivers/net/ethernet/adi/bfin_mac.h
--

1.7.6

_______________________________________________
Uclinux-dist-devel mailing list
Uclinux-dist-devel@blackfin.uclinux.org
https://blackfin.uclinux.org/mailman/listinfo/uclinux-dist-devel