On Tue, Jul 22, 2008 at 05:34:43PM +0200, Ingo Molnar wrote:

* David Newall [off-list ref] wrote:

quoted

Ingo Molnar wrote:

quoted

* David Newall [off-list ref] wrote:
  

quoted

You really should start that capture, and on both client and server. 
You don't need to dump everything, only traffic to or from 
server:distcc.
    

It's not feasible. That box did in excess of 200 GB of network traffic 
in the past 7 hours alone.

You only need distcc traffic, and perhaps only after it's hung.  With 
250k outstanding per socket, are you certain that no traffic was sent? 
Is it certain that one packet wasn't being sent each three minutes?  I 
suppose you're right and the stack really is stuck, but this is such 
an easy thing to check and eliminate that you should do so.  I 
suppose, too, that you should trace the server-side processes and 
confirm that they are waiting for socket input.  You should dump tcp 
(for the distcc port) next time the problem recurs and also check that 
the server processes are waiting for socket input.

ok, will do that if it happens again.

Ingo,

if it can help, I have a "capture" script which allows you to define
a size and will rotate captures within that size. That's what I'm
using to troubleshoot rarely occuring problems in datacenters, so
it's horrible but efficient :-)

You just have to stop it once the problem has happened again. Ping
me if you're interested (I'm lazy to start my laptop right just for
it now in fact).

Willy