[PATCH] powerpc: Optimise the 64bit optimised __clear_user

STALE5234d

38 messages, 12 authors, 2012-06-14 · open the first message on its own page

[PATCH] powerpc: Optimise the 64bit optimised __clear_user

From: Anton Blanchard <hidden>
Date: 2012-06-04 07:58:58 

I blame Mikey for this. He elevated my slightly dubious testcase:

# dd if=/dev/zero of=/dev/null bs=1M count=10000

to benchmark status. And naturally we need to be number 1 at creating
zeros. So lets improve __clear_user some more.

As Paul suggests we can use dcbz for large lengths. This patch gets
the destination 128 byte aligned then uses dcbz on whole cachelines.

Before:
10485760000 bytes (10 GB) copied, 0.414744 s, 25.3 GB/s

After:
10485760000 bytes (10 GB) copied, 0.268597 s, 39.0 GB/s

39 GB/s, a new record.

Signed-off-by: Anton Blanchard <redacted>
---

Index: linux-build/arch/powerpc/lib/string_64.S
===================================================================
--- linux-build.orig/arch/powerpc/lib/string_64.S	2012-06-04 16:18:56.351604302 +1000
+++ linux-build/arch/powerpc/lib/string_64.S	2012-06-04 16:47:10.538500871 +1000
@@ -78,7 +78,7 @@ _GLOBAL(__clear_user)
 	blt	.Lshort_clear
 	mr	r8,r3
 	mtocrf	0x01,r6
-	clrldi	r6,r6,(64-3)
+	clrldi	r7,r6,(64-3)
 
 	/* Get the destination 8 byte aligned */
 	bf	cr7*4+3,1f
@@ -93,11 +93,16 @@ err1;	sth	r0,0(r3)
 err1;	stw	r0,0(r3)
 	addi	r3,r3,4
 
-3:	sub	r4,r4,r6
-	srdi	r6,r4,5
+3:	sub	r4,r4,r7
+
 	cmpdi	r4,32
+	cmpdi	cr1,r4,512
 	blt	.Lshort_clear
-	mtctr	r6
+	bgt	cr1,.Llong_clear
+
+.Lmedium_clear:
+	srdi	r7,r4,5
+	mtctr	r7
 
 	/* Do 32 byte chunks */
 4:
@@ -139,3 +144,52 @@ err1;	stb	r0,0(r3)
 
 10:	li	r3,0
 	blr
+
+.Llong_clear:
+	/* Destination is 8 byte aligned, need to get it 128 byte aligned */
+	bf	cr7*4+0,11f
+err2;	std	r0,0(r3)
+	addi	r3,r3,8
+	addi	r4,r4,-8
+
+11:	srdi	r6,r6,4
+	mtocrf	0x01,r6
+
+	bf	cr7*4+3,12f
+err2;	std	r0,0(r3)
+err2;	std	r0,8(r3)
+	addi	r3,r3,16
+	addi	r4,r4,-16
+
+12:	bf	cr7*4+2,13f
+err2;	std	r0,0(r3)
+err2;	std	r0,8(r3)
+err2;	std	r0,16(r3)
+err2;	std	r0,24(r3)
+	addi	r3,r3,32
+	addi	r4,r4,-32
+
+13:	bf	cr7*4+1,14f
+err2;	std	r0,0(r3)
+err2;	std	r0,8(r3)
+err2;	std	r0,16(r3)
+err2;	std	r0,24(r3)
+err2;	std	r0,32(r3)
+err2;	std	r0,40(r3)
+err2;	std	r0,48(r3)
+err2;	std	r0,56(r3)
+	addi	r3,r3,64
+	addi	r4,r4,-64
+
+14:	srdi	r6,r4,7
+	mtctr	r6
+
+15:
+err2;	dcbz	r0,r3
+	addi	r3,r3,128
+	addi	r4,r4,-128
+	bdnz	15b
+
+	cmpdi	r4,32
+	blt	.Lshort_clear
+	b	.Lmedium_clear

Re: [PATCH] powerpc: Optimise the 64bit optimised __clear_user

From: Olof Johansson <hidden>
Date: 2012-06-04 13:12:35 

Hi,

On Mon, Jun 4, 2012 at 12:58 AM, Anton Blanchard [off-list ref] wrote:
I blame Mikey for this. He elevated my slightly dubious testcase:

# dd if=3D/dev/zero of=3D/dev/null bs=3D1M count=3D10000

to benchmark status. And naturally we need to be number 1 at creating
zeros. So lets improve __clear_user some more.

As Paul suggests we can use dcbz for large lengths. This patch gets
the destination 128 byte aligned then uses dcbz on whole cachelines.

Before:
10485760000 bytes (10 GB) copied, 0.414744 s, 25.3 GB/s

After:
10485760000 bytes (10 GB) copied, 0.268597 s, 39.0 GB/s

39 GB/s, a new record.

Signed-off-by: Anton Blanchard <redacted>
---

Index: linux-build/arch/powerpc/lib/string_64.S
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
quoted hunk
--- linux-build.orig/arch/powerpc/lib/string_64.S =A0 =A0 =A0 2012-06-04 =
16:18:56.351604302 +1000
quoted hunk
+++ linux-build/arch/powerpc/lib/string_64.S =A0 =A02012-06-04 16:47:10.5=
38500871 +1000
quoted hunk
@@ -78,7 +78,7 @@ _GLOBAL(__clear_user)
[..]
quoted hunk
+15:
+err2; =A0dcbz =A0 =A0r0,r3
+ =A0 =A0 =A0 addi =A0 =A0r3,r3,128
+ =A0 =A0 =A0 addi =A0 =A0r4,r4,-128
+ =A0 =A0 =A0 bdnz =A0 =A015b
This breaks architecture spec (and at least one implementation); cache
lines are not guaranteed to be 128 bytes.


-Olof

Re: [PATCH] powerpc: Optimise the 64bit optimised __clear_user

From: Kumar Gala <hidden>
Date: 2012-06-04 14:44:29 

On Jun 4, 2012, at 8:12 AM, Olof Johansson wrote:

Hi,
=20
On Mon, Jun 4, 2012 at 12:58 AM, Anton Blanchard [off-list ref] =
wrote:
quoted
=20
I blame Mikey for this. He elevated my slightly dubious testcase:
=20
# dd if=3D/dev/zero of=3D/dev/null bs=3D1M count=3D10000
=20
to benchmark status. And naturally we need to be number 1 at creating
zeros. So lets improve __clear_user some more.
=20
As Paul suggests we can use dcbz for large lengths. This patch gets
the destination 128 byte aligned then uses dcbz on whole cachelines.
=20
Before:
10485760000 bytes (10 GB) copied, 0.414744 s, 25.3 GB/s
=20
After:
10485760000 bytes (10 GB) copied, 0.268597 s, 39.0 GB/s
=20
39 GB/s, a new record.
=20
Signed-off-by: Anton Blanchard <redacted>
---
=20
Index: linux-build/arch/powerpc/lib/string_64.S
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
quoted
--- linux-build.orig/arch/powerpc/lib/string_64.S       2012-06-04 =
16:18:56.351604302 +1000
quoted
+++ linux-build/arch/powerpc/lib/string_64.S    2012-06-04 =
16:47:10.538500871 +1000
quoted
@@ -78,7 +78,7 @@ _GLOBAL(__clear_user)
[..]
=20
quoted
+15:
+err2;  dcbz    r0,r3
+       addi    r3,r3,128
+       addi    r4,r4,-128
+       bdnz    15b
=20
This breaks architecture spec (and at least one implementation); cache
lines are not guaranteed to be 128 bytes.
I'm guessing it breaks more than one (FSL 64-bit is 64byte cache lines).

- k=

[PATCH] powerpc: Optimise the 64bit optimised __clear_user

From: Anton Blanchard <hidden>
Date: 2012-06-05 02:02:22 

I blame Mikey for this. He elevated my slightly dubious testcase:

# dd if=/dev/zero of=/dev/null bs=1M count=10000

to benchmark status. And naturally we need to be number 1 at creating
zeros. So lets improve __clear_user some more.

As Paul suggests we can use dcbz for large lengths. This patch gets
the destination cacheline aligned then uses dcbz on whole cachelines.

Before:
10485760000 bytes (10 GB) copied, 0.414744 s, 25.3 GB/s

After:
10485760000 bytes (10 GB) copied, 0.268597 s, 39.0 GB/s

39 GB/s, a new record.

Signed-off-by: Anton Blanchard <redacted>
---

v2: handle any cacheline size

Index: linux-build/arch/powerpc/lib/string_64.S
===================================================================
--- linux-build.orig/arch/powerpc/lib/string_64.S	2012-06-04 16:18:56.351604302 +1000
+++ linux-build/arch/powerpc/lib/string_64.S	2012-06-05 11:42:10.044654851 +1000
@@ -19,6 +19,12 @@
  */
 
 #include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+	.section	".toc","aw"
+PPC64_CACHES:
+	.tc		ppc64_caches[TC],ppc64_caches
+	.section	".text"
 
 /**
  * __clear_user: - Zero a block of memory in user space, with less checking.
@@ -94,9 +100,14 @@ err1;	stw	r0,0(r3)
 	addi	r3,r3,4
 
 3:	sub	r4,r4,r6
-	srdi	r6,r4,5
+
 	cmpdi	r4,32
+	cmpdi	cr1,r4,512
 	blt	.Lshort_clear
+	bgt	cr1,.Llong_clear
+
+.Lmedium_clear:
+	srdi	r6,r4,5
 	mtctr	r6
 
 	/* Do 32 byte chunks */
@@ -139,3 +150,53 @@ err1;	stb	r0,0(r3)
 
 10:	li	r3,0
 	blr
+
+.Llong_clear:
+	ld	r5,PPC64_CACHES@toc(r2)
+
+	bf	cr7*4+0,11f
+err2;	std	r0,0(r3)
+	addi	r3,r3,8
+	addi	r4,r4,-8
+
+	/* Destination is 16 byte aligned, need to get it cacheline aligned */
+11:	lwz	r7,DCACHEL1LOGLINESIZE(r5)
+	lwz	r9,DCACHEL1LINESIZE(r5)
+
+	/*
+	 * With worst case alignment the long clear loop takes a minimum
+	 * of 1 byte less than 2 cachelines.
+	 */
+	sldi	r10,r9,2
+	cmpd	r4,r10
+	blt	.Lmedium_clear
+
+	neg	r6,r3
+	addi	r10,r9,-1
+	and.	r5,r6,r10
+	beq	13f
+
+	srdi	r6,r5,4
+	mtctr	r6
+	mr	r8,r3
+12:
+err1;	std	r0,0(r3)
+err1;	std	r0,8(r3)
+	addi	r3,r3,16
+	bdnz	12b
+
+	sub	r4,r4,r5
+
+13:	srd	r6,r4,r7
+	mtctr	r6
+	mr	r8,r3
+14:
+err1;	dcbz	r0,r3
+	add	r3,r3,r9
+	bdnz	14b
+
+	and	r4,r4,r10
+
+	cmpdi	r4,32
+	blt	.Lshort_clear
+	b	.Lmedium_clear

Re: [PATCH] powerpc: Optimise the 64bit optimised __clear_user

From: Segher Boessenkool <hidden>
Date: 2012-06-06 16:41:37 

+err1;	dcbz	r0,r3
There is no such instruction, you probably meant "dcbz 0,r3"?


Segher

Re: [PATCH] powerpc: Optimise the 64bit optimised __clear_user

From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: 2012-06-06 21:20:15 

On Wed, 2012-06-06 at 18:40 +0200, Segher Boessenkool wrote:
quoted
+err1;	dcbz	r0,r3
There is no such instruction, you probably meant "dcbz 0,r3"?
This reminds me... what would happen if we changed all our

#define	r0	0
#define	r1	1

etc... to:

#define r0	%r0
#define r1	%r1

?

I'm thinking it might help catch that sort of nasties (and some of them
can be really nasty, such as inverting mfspr/mtspr arguments, or vs ori,
etc... ). I'm sure we'd have a problem with a few macros & inline
constructs but nothing we can't fix..

(Haven't tested ... still home, officially sick :-)

Cheers,
Ben.

Re: [PATCH] powerpc: Optimise the 64bit optimised __clear_user

From: Olof Johansson <hidden>
Date: 2012-06-07 00:30:19 

On Mon, Jun 4, 2012 at 7:02 PM, Anton Blanchard [off-list ref] wrote:
I blame Mikey for this. He elevated my slightly dubious testcase:

# dd if=/dev/zero of=/dev/null bs=1M count=10000

to benchmark status. And naturally we need to be number 1 at creating
zeros. So lets improve __clear_user some more.

As Paul suggests we can use dcbz for large lengths. This patch gets
the destination cacheline aligned then uses dcbz on whole cachelines.

Before:
10485760000 bytes (10 GB) copied, 0.414744 s, 25.3 GB/s

After:
10485760000 bytes (10 GB) copied, 0.268597 s, 39.0 GB/s

39 GB/s, a new record.

Signed-off-by: Anton Blanchard <redacted>
Besides the comments from Segher, feel free to add:

Tested-by: Olof Johansson <redacted>
Acked-by: Olof Johansson <redacted>

Didn't help performance all that much on pa6t, but it didn't go down.
Too low on cycles to actually analyze why at this time.

-OIof

Re: [PATCH] powerpc: Optimise the 64bit optimised __clear_user

From: Paul Mackerras <hidden>
Date: 2012-06-07 03:04:23 

On Wed, Jun 06, 2012 at 06:40:54PM +0200, Segher Boessenkool wrote:
quoted
+err1;	dcbz	r0,r3
There is no such instruction, you probably meant "dcbz 0,r3"?
There certainly is such an instruction, though it doesn't do exactly
what a naive reader might expect.  Using 0 rather than r0 or %r0
improves readability but makes no difference to the assembler or the
cpu.

Paul.

Re: [PATCH] powerpc: Optimise the 64bit optimised __clear_user

From: Michael Neuling <hidden>
Date: 2012-06-07 06:05:04 

Benjamin Herrenschmidt [off-list ref] wrote:

On Wed, 2012-06-06 at 18:40 +0200, Segher Boessenkool wrote:
quoted
quoted
+err1;	dcbz	r0,r3
There is no such instruction, you probably meant "dcbz 0,r3"?
This reminds me... what would happen if we changed all our

#define	r0	0
#define	r1	1

etc... to:

#define r0	%r0
#define r1	%r1

?

I'm thinking it might help catch that sort of nasties (and some of them
can be really nasty, such as inverting mfspr/mtspr arguments, or vs ori,
etc... ). I'm sure we'd have a problem with a few macros & inline
constructs but nothing we can't fix..
One problem with this is when we construct the instructions, like using
anything from ppc-opcode.h.  eg. using PPC_POPCNTB would need to go from:
    PPC_POPCNTB(r3,r3) 
to:
    PPC_POPCNTB(3,3) 
Which is less readable IMHO.

Mikey

Re: [PATCH] powerpc: Optimise the 64bit optimised __clear_user

From: Michael Ellerman <hidden>
Date: 2012-06-07 06:07:15 

On Thu, 2012-06-07 at 16:05 +1000, Michael Neuling wrote:
Benjamin Herrenschmidt [off-list ref] wrote:
quoted
On Wed, 2012-06-06 at 18:40 +0200, Segher Boessenkool wrote:
quoted
quoted
+err1;	dcbz	r0,r3
There is no such instruction, you probably meant "dcbz 0,r3"?
This reminds me... what would happen if we changed all our

#define	r0	0
#define	r1	1

etc... to:

#define r0	%r0
#define r1	%r1

?

I'm thinking it might help catch that sort of nasties (and some of them
can be really nasty, such as inverting mfspr/mtspr arguments, or vs ori,
etc... ). I'm sure we'd have a problem with a few macros & inline
constructs but nothing we can't fix..
One problem with this is when we construct the instructions, like using
anything from ppc-opcode.h.  eg. using PPC_POPCNTB would need to go from:
    PPC_POPCNTB(r3,r3) 
to:
    PPC_POPCNTB(3,3) 
#define R(x)	x

#define PPC_POPCNTB(R(3), R(3))

??

cheers

Re: [PATCH] powerpc: Optimise the 64bit optimised __clear_user

From: Michael Neuling <hidden>
Date: 2012-06-07 06:12:09 

Michael Ellerman [off-list ref] wrote:

On Thu, 2012-06-07 at 16:05 +1000, Michael Neuling wrote:
quoted
Benjamin Herrenschmidt [off-list ref] wrote:
quoted
On Wed, 2012-06-06 at 18:40 +0200, Segher Boessenkool wrote:
quoted
quoted
+err1;	dcbz	r0,r3
There is no such instruction, you probably meant "dcbz 0,r3"?
This reminds me... what would happen if we changed all our

#define	r0	0
#define	r1	1

etc... to:

#define r0	%r0
#define r1	%r1

?

I'm thinking it might help catch that sort of nasties (and some of them
can be really nasty, such as inverting mfspr/mtspr arguments, or vs ori,
etc... ). I'm sure we'd have a problem with a few macros & inline
constructs but nothing we can't fix..
One problem with this is when we construct the instructions, like using
anything from ppc-opcode.h.  eg. using PPC_POPCNTB would need to go from:
    PPC_POPCNTB(r3,r3) 
to:
    PPC_POPCNTB(3,3) 
#define R(x)	x
#define R(x)	(x) 

#define PPC_POPCNTB(R(3), R(3))
Maybe, looks pretty gross but you're the maintainer! :-)

Mikey

Re: [PATCH] powerpc: Optimise the 64bit optimised __clear_user

From: Michael Ellerman <hidden>
Date: 2012-06-07 06:18:02 

On Thu, 2012-06-07 at 16:12 +1000, Michael Neuling wrote:
Michael Ellerman [off-list ref] wrote:
quoted
On Thu, 2012-06-07 at 16:05 +1000, Michael Neuling wrote:
quoted
Benjamin Herrenschmidt [off-list ref] wrote:
quoted
On Wed, 2012-06-06 at 18:40 +0200, Segher Boessenkool wrote:
quoted
quoted
+err1;	dcbz	r0,r3
There is no such instruction, you probably meant "dcbz 0,r3"?
This reminds me... what would happen if we changed all our

#define	r0	0
#define	r1	1

etc... to:

#define r0	%r0
#define r1	%r1

?

I'm thinking it might help catch that sort of nasties (and some of them
can be really nasty, such as inverting mfspr/mtspr arguments, or vs ori,
etc... ). I'm sure we'd have a problem with a few macros & inline
constructs but nothing we can't fix..
One problem with this is when we construct the instructions, like using
anything from ppc-opcode.h.  eg. using PPC_POPCNTB would need to go from:
    PPC_POPCNTB(r3,r3) 
to:
    PPC_POPCNTB(3,3) 
#define R(x)	x
#define R(x)	(x)
quoted
#define PPC_POPCNTB(R(3), R(3))
Maybe, looks pretty gross but you're the maintainer! :-)
No I am not!


I agree it's fairly gross. But I'll take gross and correct over ungross
and buggy.

cheers

Re: [PATCH] powerpc: Optimise the 64bit optimised __clear_user

From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: 2012-06-07 06:39:45 

On Thu, 2012-06-07 at 16:05 +1000, Michael Neuling wrote:

One problem with this is when we construct the instructions, like using
anything from ppc-opcode.h.  eg. using PPC_POPCNTB would need to go from:
    PPC_POPCNTB(r3,r3) 
to:
    PPC_POPCNTB(3,3) 
Which is less readable IMHO.
Yes, I know. Not much to do about this, but it might still be worth it,
how much time wasted due to mixing up or with ori in asm somewhere ?

One option would be to #define R3 (or _r3) for use in those macros so
we still have something nicer than just "3"... oh well.

Cheers,
Ben.

RE: [PATCH] powerpc: Optimise the 64bit optimised __clear_user

From: David Laight <hidden>
Date: 2012-06-07 08:46:11 

=20

-----Original Message-----
From: Linuxppc-dev=20
[mailto:linuxppc-dev-bounces+david.laight=3Daculab.com@lists.ozl
abs.org] On Behalf Of Benjamin Herrenschmidt
Sent: 07 June 2012 07:40
To: Michael Neuling
Cc: michael@ellerman.id.au; paulus@samba.org; Anton=20
Blanchard; olof@lixom.net; linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH] powerpc: Optimise the 64bit optimised=20
__clear_user
=20
On Thu, 2012-06-07 at 16:05 +1000, Michael Neuling wrote:
=20
quoted
One problem with this is when we construct the=20
instructions, like using
quoted
anything from ppc-opcode.h.  eg. using PPC_POPCNTB would=20
need to go from:
quoted
    PPC_POPCNTB(r3,r3)=20
to:
    PPC_POPCNTB(3,3)=20
Which is less readable IMHO.
=20
Yes, I know. Not much to do about this, but it might still be=20
worth it,
how much time wasted due to mixing up or with ori in asm somewhere ?
=20
One option would be to #define R3 (or _r3) for use in those macros so
we still have something nicer than just "3"... oh well.
You then need to catch all the other bugs where a register
is being used instead of a constant.
Time to make the assembler require %r0 (etc)

	David

Re: [PATCH] powerpc: Optimise the 64bit optimised __clear_user

From: Scott Wood <hidden>
Date: 2012-06-07 17:51:17 

On 06/06/2012 10:04 PM, Paul Mackerras wrote:
On Wed, Jun 06, 2012 at 06:40:54PM +0200, Segher Boessenkool wrote:
quoted
quoted
+err1;	dcbz	r0,r3
There is no such instruction, you probably meant "dcbz 0,r3"?
There certainly is such an instruction, though it doesn't do exactly
what a naive reader might expect.  Using 0 rather than r0 or %r0
improves readability but makes no difference to the assembler or the
cpu.
The assembler can't tell that you used r0 rather than 0, because that's
handled by the preprocessor, but it seems like a bug (or at least lax
error checking) that it accepts %r0 there, and that objdump decodes it
as "dcbz r0,r3" rather than "dcbz 0,r3".

It's also odd that objdump produces output containing "r3" (not %r3)
when the assembler won't directly accept it.

-Scott

[PATCH] powerpc: Fix sldi to take literal not register name

From: Michael Neuling <hidden>
Date: 2012-06-07 23:52:29 

Fix sldi to take literal not register name.

Was introduced by:
 commit 19ccb76a1938ab364a412253daec64613acbf3df
 Author: Paul Mackerras [off-list ref]
 Date:   Sat Jul 23 17:42:46 2011 +1000

Signed-off-by: Michael Neuling <redacted>
---
I got sick off the bike-shedding in a vacuum and started doing the
conversion.  Found this as a result.

I'll post the full conversion at some point, but this fix is useful
now.  

diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index a84aafc..969caeb 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -810,7 +810,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
 	lwz	r3,VCORE_NAPPING_THREADS(r5)
 	lwz	r4,VCPU_PTID(r9)
 	li	r0,1
-	sldi	r0,r0,r4
+	sldi	r0,r0,4
 	andc.	r3,r3,r0		/* no sense IPI'ing ourselves */
 	beq	43f
 	mulli	r4,r4,PACA_SIZE		/* get paca for thread 0 */

Re: [PATCH] powerpc: Fix sldi to take literal not register name

From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: 2012-06-08 00:19:49 

On Fri, 2012-06-08 at 09:52 +1000, Michael Neuling wrote:
Fix sldi to take literal not register name.

Was introduced by:
 commit 19ccb76a1938ab364a412253daec64613acbf3df
 Author: Paul Mackerras [off-list ref]
 Date:   Sat Jul 23 17:42:46 2011 +1000

Signed-off-by: Michael Neuling <redacted>
---
I got sick off the bike-shedding in a vacuum and started doing the
conversion.  Found this as a result.

I'll post the full conversion at some point, but this fix is useful
now.  
Euh... except that:
quoted hunk
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index a84aafc..969caeb 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -810,7 +810,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
 	lwz	r3,VCORE_NAPPING_THREADS(r5)
 	lwz	r4,VCPU_PTID(r9)
 	li	r0,1
-	sldi	r0,r0,r4
+	sldi	r0,r0,4
Isn't the right fix s/sldi/sld and keep r4 ?

IE. I think Paul meant to shift 1 by the TID not shift 1 by 4

Cheers,
Ben.

 	andc.	r3,r3,r0		/* no sense IPI'ing ourselves */
 	beq	43f
 	mulli	r4,r4,PACA_SIZE		/* get paca for thread 0 */

Re: [PATCH] powerpc: Optimise the 64bit optimised __clear_user

From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: 2012-06-08 00:51:53 

On Thu, 2012-06-07 at 12:51 -0500, Scott Wood wrote:
The assembler can't tell that you used r0 rather than 0, because
that's
handled by the preprocessor, but it seems like a bug (or at least lax
error checking) that it accepts %r0 there, and that objdump decodes it
as "dcbz r0,r3" rather than "dcbz 0,r3".
Well, this is the domain of bike shed painting :-) the syntax of the
instruction is:

	dcbz RA,RB

Now, of course, like other RA,RB pairs it has the semantic that

if RA = 0 then b <- 0
else           b <- (RA)
EA <- b + (RB)

If we were to be pendantic and our assembly could also enforce the use
of % for registers, I suppose it would make sense to require 0 rather
than %0 for those "RA" forms to make it absolutely clear that we are
talking about 0 and not r0 in this specific case, I agree, but in the
current shape of the asm, I don't think that's something to expect.

Cheers,
Ben.

Re: [PATCH] powerpc: Optimise the 64bit optimised __clear_user

From: Andreas Schwab <hidden>
Date: 2012-06-08 07:34:42 

Scott Wood [off-list ref] writes:

and that objdump decodes it as "dcbz r0,r3" rather than "dcbz 0,r3".
<http://permalink.gmane.org/gmane.comp.gnu.binutils/57870>

Andreas.

-- 
Andreas Schwab, schwab@linux-m68k.org
GPG Key fingerprint = 58CA 54C7 6D53 942B 1756  01D3 44D5 214B 8276 4ED5
"And now for something completely different."

[PATCH 0/15] powerpc: convert GPR usage to %r0-31 and R0-31

From: Michael Neuling <hidden>
Date: 2012-06-08 11:36:05 

First 5 patches convert us to %r0-31.

Next 10 patches make using R0-31 required.

[PATCH 2/15] powerpc: modify macro ready for %r0 register change

From: Michael Neuling <hidden>
Date: 2012-06-08 11:36:05 

The assembler doesn't take %r0 register arguments in braces, so remove them.

Signed-off-by: Michael Neuling <redacted>
---

 arch/powerpc/include/asm/ppc_asm.h |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

Index: clone3/arch/powerpc/include/asm/ppc_asm.h
===================================================================
--- clone3.orig/arch/powerpc/include/asm/ppc_asm.h
+++ clone3/arch/powerpc/include/asm/ppc_asm.h
@@ -295,14 +295,14 @@ n:
  */
 #ifdef __powerpc64__
 #define LOAD_REG_IMMEDIATE(reg,expr)		\
-	lis     (reg),(expr)@highest;		\
-	ori     (reg),(reg),(expr)@higher;	\
-	rldicr  (reg),(reg),32,31;		\
-	oris    (reg),(reg),(expr)@h;		\
-	ori     (reg),(reg),(expr)@l;
+	lis     reg,(expr)@highest;		\
+	ori     reg,reg,(expr)@higher;	\
+	rldicr  reg,reg,32,31;		\
+	oris    reg,reg,(expr)@h;		\
+	ori     reg,reg,(expr)@l;
 
 #define LOAD_REG_ADDR(reg,name)			\
-	ld	(reg),name@got(r2)
+	ld	reg,name@got(r2)
 
 #define LOAD_REG_ADDRBASE(reg,name)	LOAD_REG_ADDR(reg,name)
 #define ADDROFF(name)			0
@@ -313,12 +313,12 @@ n:
 #else /* 32-bit */
 
 #define LOAD_REG_IMMEDIATE(reg,expr)		\
-	lis	(reg),(expr)@ha;		\
-	addi	(reg),(reg),(expr)@l;
+	lis	reg,(expr)@ha;		\
+	addi	reg,reg,(expr)@l;
 
 #define LOAD_REG_ADDR(reg,name)		LOAD_REG_IMMEDIATE(reg, name)
 
-#define LOAD_REG_ADDRBASE(reg, name)	lis	(reg),name@ha
+#define LOAD_REG_ADDRBASE(reg, name)	lis	reg,name@ha
 #define ADDROFF(name)			name@l
 
 /* offsets for stack frame layout */

[PATCH 1/15] powerpc: Add defines for R0-R31

From: Michael Neuling <hidden>
Date: 2012-06-08 11:36:05 

We are going to use these later and convert r0 to %r0 etc.

Signed-off-by: Michael Neuling <redacted>
---

 arch/powerpc/include/asm/ppc_asm.h |   33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

Index: clone3/arch/powerpc/include/asm/ppc_asm.h
===================================================================
--- clone3.orig/arch/powerpc/include/asm/ppc_asm.h
+++ clone3/arch/powerpc/include/asm/ppc_asm.h
@@ -525,6 +525,39 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601)
 #define	r30	30
 #define	r31	31
 
+#define	R0	0
+#define	R1	1
+#define	R2	2
+#define	R3	3
+#define	R4	4
+#define	R5	5
+#define	R6	6
+#define	R7	7
+#define	R8	8
+#define	R9	9
+#define	R10	10
+#define	R11	11
+#define	R12	12
+#define	R13	13
+#define	R14	14
+#define	R15	15
+#define	R16	16
+#define	R17	17
+#define	R18	18
+#define	R19	19
+#define	R20	20
+#define	R21	21
+#define	R22	22
+#define	R23	23
+#define	R24	24
+#define	R25	25
+#define	R26	26
+#define	R27	27
+#define	R28	28
+#define	R29	29
+#define	R30	30
+#define	R31	31
+
 
 /* Floating Point Registers (FPRs) */

[PATCH 3/15] powerpc: fix usage of register macros getting ready for %r0 change

From: Michael Neuling <hidden>
Date: 2012-06-08 11:36:05 

Anything that uses a constructed instruction (ie. from ppc-opcode.h),
need to use the new R0 macro, as %r0 is not going to work.

Also convert usages of macros where we are just determining an offset
(usually for a load/store), like:
	std	r14,STK_REG(r14)(r1)
Can't use STK_REG(r14) as %r14 doesn't work in the STK_REG macro since
it's just calculating an offset.

Signed-off-by: Michael Neuling <redacted>
---

 arch/powerpc/kernel/cpu_setup_a2.S             |    6 
 arch/powerpc/kernel/fpu.S                      |    4 
 arch/powerpc/kernel/misc_64.S                  |    4 
 arch/powerpc/kvm/book3s_hv_rmhandlers.S        |  218 ++++++++++++-------------
 arch/powerpc/lib/checksum_64.S                 |   24 +-
 arch/powerpc/lib/copyuser_64.S                 |    6 
 arch/powerpc/lib/copyuser_power7.S             |   84 ++++-----
 arch/powerpc/lib/hweight_64.S                  |   14 -
 arch/powerpc/lib/ldstfp.S                      |   12 -
 arch/powerpc/lib/mem_64.S                      |    6 
 arch/powerpc/lib/memcpy_64.S                   |    6 
 arch/powerpc/mm/hash_low_64.S                  |  148 ++++++++--------
 arch/powerpc/mm/tlb_low_64e.S                  |   10 -
 arch/powerpc/mm/tlb_nohash_low.S               |    6 
 arch/powerpc/platforms/cell/beat_hvCall.S      |   26 +-
 arch/powerpc/platforms/powernv/opal-takeover.S |    8 
 arch/powerpc/platforms/powernv/opal-wrappers.S |    2 
 arch/powerpc/platforms/pseries/hvCall.S        |   72 ++++----
 18 files changed, 328 insertions(+), 328 deletions(-)

Index: clone3/arch/powerpc/kernel/cpu_setup_a2.S
===================================================================
--- clone3.orig/arch/powerpc/kernel/cpu_setup_a2.S
+++ clone3/arch/powerpc/kernel/cpu_setup_a2.S
@@ -100,19 +100,19 @@ _icswx_skip_guest:
 	lis	r4,(MMUCR0_TLBSEL_I|MMUCR0_ECL)@h
 	mtspr	SPRN_MMUCR0, r4
 	li	r4,A2_IERAT_SIZE-1
-	PPC_ERATWE(r4,r4,3)
+	PPC_ERATWE(R4,R4,3)
 
 	/* Now set the D-ERAT watermark to 31 */
 	lis	r4,(MMUCR0_TLBSEL_D|MMUCR0_ECL)@h
 	mtspr	SPRN_MMUCR0, r4
 	li	r4,A2_DERAT_SIZE-1
-	PPC_ERATWE(r4,r4,3)
+	PPC_ERATWE(R4,R4,3)
 
 	/* And invalidate the beast just in case. That won't get rid of
 	 * a bolted entry though it will be in LRU and so will go away eventually
 	 * but let's not bother for now
 	 */
-	PPC_ERATILX(0,0,0)
+	PPC_ERATILX(0,R0,R0)
 1:
 	blr
 
Index: clone3/arch/powerpc/kernel/fpu.S
===================================================================
--- clone3.orig/arch/powerpc/kernel/fpu.S
+++ clone3/arch/powerpc/kernel/fpu.S
@@ -106,7 +106,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 #endif
 	lfd	fr0,THREAD_FPSCR(r5)
 	MTFSF_L(fr0)
-	REST_32FPVSRS(0, r4, r5)
+	REST_32FPVSRS(0, R4, R5)
 #ifndef CONFIG_SMP
 	subi	r4,r5,THREAD
 	fromreal(r4)
@@ -140,7 +140,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 	addi	r3,r3,THREAD	        /* want THREAD of task */
 	PPC_LL	r5,PT_REGS(r3)
 	PPC_LCMPI	0,r5,0
-	SAVE_32FPVSRS(0, r4 ,r3)
+	SAVE_32FPVSRS(0, R4 ,R3)
 	mffs	fr0
 	stfd	fr0,THREAD_FPSCR(r3)
 	beq	1f
Index: clone3/arch/powerpc/kernel/misc_64.S
===================================================================
--- clone3.orig/arch/powerpc/kernel/misc_64.S
+++ clone3/arch/powerpc/kernel/misc_64.S
@@ -314,7 +314,7 @@ _GLOBAL(real_205_readb)
 	mtmsrd	r0
 	sync
 	isync
-	LBZCIX(r3,0,r3)
+	LBZCIX(R3,0,R3)
 	isync
 	mtmsrd	r7
 	sync
@@ -329,7 +329,7 @@ _GLOBAL(real_205_writeb)
 	mtmsrd	r0
 	sync
 	isync
-	STBCIX(r3,0,r4)
+	STBCIX(R3,0,R4)
 	isync
 	mtmsrd	r7
 	sync
Index: clone3/arch/powerpc/kvm/book3s_hv_rmhandlers.S
===================================================================
--- clone3.orig/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ clone3/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -206,24 +206,24 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
 	/* Load up FP, VMX and VSX registers */
 	bl	kvmppc_load_fp
 
-	ld	r14, VCPU_GPR(r14)(r4)
-	ld	r15, VCPU_GPR(r15)(r4)
-	ld	r16, VCPU_GPR(r16)(r4)
-	ld	r17, VCPU_GPR(r17)(r4)
-	ld	r18, VCPU_GPR(r18)(r4)
-	ld	r19, VCPU_GPR(r19)(r4)
-	ld	r20, VCPU_GPR(r20)(r4)
-	ld	r21, VCPU_GPR(r21)(r4)
-	ld	r22, VCPU_GPR(r22)(r4)
-	ld	r23, VCPU_GPR(r23)(r4)
-	ld	r24, VCPU_GPR(r24)(r4)
-	ld	r25, VCPU_GPR(r25)(r4)
-	ld	r26, VCPU_GPR(r26)(r4)
-	ld	r27, VCPU_GPR(r27)(r4)
-	ld	r28, VCPU_GPR(r28)(r4)
-	ld	r29, VCPU_GPR(r29)(r4)
-	ld	r30, VCPU_GPR(r30)(r4)
-	ld	r31, VCPU_GPR(r31)(r4)
+	ld	r14, VCPU_GPR(R14)(r4)
+	ld	r15, VCPU_GPR(R15)(r4)
+	ld	r16, VCPU_GPR(R16)(r4)
+	ld	r17, VCPU_GPR(R17)(r4)
+	ld	r18, VCPU_GPR(R18)(r4)
+	ld	r19, VCPU_GPR(R19)(r4)
+	ld	r20, VCPU_GPR(R20)(r4)
+	ld	r21, VCPU_GPR(R21)(r4)
+	ld	r22, VCPU_GPR(R22)(r4)
+	ld	r23, VCPU_GPR(R23)(r4)
+	ld	r24, VCPU_GPR(R24)(r4)
+	ld	r25, VCPU_GPR(R25)(r4)
+	ld	r26, VCPU_GPR(R26)(r4)
+	ld	r27, VCPU_GPR(R27)(r4)
+	ld	r28, VCPU_GPR(R28)(r4)
+	ld	r29, VCPU_GPR(R29)(r4)
+	ld	r30, VCPU_GPR(R30)(r4)
+	ld	r31, VCPU_GPR(R31)(r4)
 
 BEGIN_FTR_SECTION
 	/* Switch DSCR to guest value */
@@ -547,21 +547,21 @@ fast_guest_return:
 	mtlr	r5
 	mtcr	r6
 
-	ld	r0, VCPU_GPR(r0)(r4)
-	ld	r1, VCPU_GPR(r1)(r4)
-	ld	r2, VCPU_GPR(r2)(r4)
-	ld	r3, VCPU_GPR(r3)(r4)
-	ld	r5, VCPU_GPR(r5)(r4)
-	ld	r6, VCPU_GPR(r6)(r4)
-	ld	r7, VCPU_GPR(r7)(r4)
-	ld	r8, VCPU_GPR(r8)(r4)
-	ld	r9, VCPU_GPR(r9)(r4)
-	ld	r10, VCPU_GPR(r10)(r4)
-	ld	r11, VCPU_GPR(r11)(r4)
-	ld	r12, VCPU_GPR(r12)(r4)
-	ld	r13, VCPU_GPR(r13)(r4)
+	ld	r0, VCPU_GPR(R0)(r4)
+	ld	r1, VCPU_GPR(R1)(r4)
+	ld	r2, VCPU_GPR(R2)(r4)
+	ld	r3, VCPU_GPR(R3)(r4)
+	ld	r5, VCPU_GPR(R5)(r4)
+	ld	r6, VCPU_GPR(R6)(r4)
+	ld	r7, VCPU_GPR(R7)(r4)
+	ld	r8, VCPU_GPR(R8)(r4)
+	ld	r9, VCPU_GPR(R9)(r4)
+	ld	r10, VCPU_GPR(R10)(r4)
+	ld	r11, VCPU_GPR(R11)(r4)
+	ld	r12, VCPU_GPR(R12)(r4)
+	ld	r13, VCPU_GPR(R13)(r4)
 
-	ld	r4, VCPU_GPR(r4)(r4)
+	ld	r4, VCPU_GPR(R4)(r4)
 
 	hrfid
 	b	.
@@ -590,22 +590,22 @@ kvmppc_interrupt:
 
 	/* Save registers */
 
-	std	r0, VCPU_GPR(r0)(r9)
-	std	r1, VCPU_GPR(r1)(r9)
-	std	r2, VCPU_GPR(r2)(r9)
-	std	r3, VCPU_GPR(r3)(r9)
-	std	r4, VCPU_GPR(r4)(r9)
-	std	r5, VCPU_GPR(r5)(r9)
-	std	r6, VCPU_GPR(r6)(r9)
-	std	r7, VCPU_GPR(r7)(r9)
-	std	r8, VCPU_GPR(r8)(r9)
+	std	r0, VCPU_GPR(R0)(r9)
+	std	r1, VCPU_GPR(R1)(r9)
+	std	r2, VCPU_GPR(R2)(r9)
+	std	r3, VCPU_GPR(R3)(r9)
+	std	r4, VCPU_GPR(R4)(r9)
+	std	r5, VCPU_GPR(R5)(r9)
+	std	r6, VCPU_GPR(R6)(r9)
+	std	r7, VCPU_GPR(R7)(r9)
+	std	r8, VCPU_GPR(R8)(r9)
 	ld	r0, HSTATE_HOST_R2(r13)
-	std	r0, VCPU_GPR(r9)(r9)
-	std	r10, VCPU_GPR(r10)(r9)
-	std	r11, VCPU_GPR(r11)(r9)
+	std	r0, VCPU_GPR(R9)(r9)
+	std	r10, VCPU_GPR(R10)(r9)
+	std	r11, VCPU_GPR(R11)(r9)
 	ld	r3, HSTATE_SCRATCH0(r13)
 	lwz	r4, HSTATE_SCRATCH1(r13)
-	std	r3, VCPU_GPR(r12)(r9)
+	std	r3, VCPU_GPR(R12)(r9)
 	stw	r4, VCPU_CR(r9)
 
 	/* Restore R1/R2 so we can handle faults */
@@ -626,7 +626,7 @@ kvmppc_interrupt:
 
 	GET_SCRATCH0(r3)
 	mflr	r4
-	std	r3, VCPU_GPR(r13)(r9)
+	std	r3, VCPU_GPR(R13)(r9)
 	std	r4, VCPU_LR(r9)
 
 	/* Unset guest mode */
@@ -968,24 +968,24 @@ BEGIN_FTR_SECTION
 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206)
 
 	/* Save non-volatile GPRs */
-	std	r14, VCPU_GPR(r14)(r9)
-	std	r15, VCPU_GPR(r15)(r9)
-	std	r16, VCPU_GPR(r16)(r9)
-	std	r17, VCPU_GPR(r17)(r9)
-	std	r18, VCPU_GPR(r18)(r9)
-	std	r19, VCPU_GPR(r19)(r9)
-	std	r20, VCPU_GPR(r20)(r9)
-	std	r21, VCPU_GPR(r21)(r9)
-	std	r22, VCPU_GPR(r22)(r9)
-	std	r23, VCPU_GPR(r23)(r9)
-	std	r24, VCPU_GPR(r24)(r9)
-	std	r25, VCPU_GPR(r25)(r9)
-	std	r26, VCPU_GPR(r26)(r9)
-	std	r27, VCPU_GPR(r27)(r9)
-	std	r28, VCPU_GPR(r28)(r9)
-	std	r29, VCPU_GPR(r29)(r9)
-	std	r30, VCPU_GPR(r30)(r9)
-	std	r31, VCPU_GPR(r31)(r9)
+	std	r14, VCPU_GPR(R14)(r9)
+	std	r15, VCPU_GPR(R15)(r9)
+	std	r16, VCPU_GPR(R16)(r9)
+	std	r17, VCPU_GPR(R17)(r9)
+	std	r18, VCPU_GPR(R18)(r9)
+	std	r19, VCPU_GPR(R19)(r9)
+	std	r20, VCPU_GPR(R20)(r9)
+	std	r21, VCPU_GPR(R21)(r9)
+	std	r22, VCPU_GPR(R22)(r9)
+	std	r23, VCPU_GPR(R23)(r9)
+	std	r24, VCPU_GPR(R24)(r9)
+	std	r25, VCPU_GPR(R25)(r9)
+	std	r26, VCPU_GPR(R26)(r9)
+	std	r27, VCPU_GPR(R27)(r9)
+	std	r28, VCPU_GPR(R28)(r9)
+	std	r29, VCPU_GPR(R29)(r9)
+	std	r30, VCPU_GPR(R30)(r9)
+	std	r31, VCPU_GPR(R31)(r9)
 
 	/* Save SPRGs */
 	mfspr	r3, SPRN_SPRG0
@@ -1160,7 +1160,7 @@ kvmppc_hdsi:
 	andi.	r0, r11, MSR_DR		/* data relocation enabled? */
 	beq	3f
 	clrrdi	r0, r4, 28
-	PPC_SLBFEE_DOT(r5, r0)		/* if so, look up SLB */
+	PPC_SLBFEE_DOT(R5, R0)		/* if so, look up SLB */
 	bne	1f			/* if no SLB entry found */
 4:	std	r4, VCPU_FAULT_DAR(r9)
 	stw	r6, VCPU_FAULT_DSISR(r9)
@@ -1234,7 +1234,7 @@ kvmppc_hisi:
 	andi.	r0, r11, MSR_IR		/* instruction relocation enabled? */
 	beq	3f
 	clrrdi	r0, r10, 28
-	PPC_SLBFEE_DOT(r5, r0)		/* if so, look up SLB */
+	PPC_SLBFEE_DOT(R5, R0)		/* if so, look up SLB */
 	bne	1f			/* if no SLB entry found */
 4:
 	/* Search the hash table. */
@@ -1278,7 +1278,7 @@ kvmppc_hisi:
  */
 	.globl	hcall_try_real_mode
 hcall_try_real_mode:
-	ld	r3,VCPU_GPR(r3)(r9)
+	ld	r3,VCPU_GPR(R3)(r9)
 	andi.	r0,r11,MSR_PR
 	bne	hcall_real_cont
 	clrrdi	r3,r3,2
@@ -1291,12 +1291,12 @@ hcall_try_real_mode:
 	add	r3,r3,r4
 	mtctr	r3
 	mr	r3,r9		/* get vcpu pointer */
-	ld	r4,VCPU_GPR(r4)(r9)
+	ld	r4,VCPU_GPR(R4)(r9)
 	bctrl
 	cmpdi	r3,H_TOO_HARD
 	beq	hcall_real_fallback
 	ld	r4,HSTATE_KVM_VCPU(r13)
-	std	r3,VCPU_GPR(r3)(r4)
+	std	r3,VCPU_GPR(R3)(r4)
 	ld	r10,VCPU_PC(r4)
 	ld	r11,VCPU_MSR(r4)
 	b	fast_guest_return
@@ -1424,7 +1424,7 @@ _GLOBAL(kvmppc_h_cede)
 	li	r0,0		/* set trap to 0 to say hcall is handled */
 	stw	r0,VCPU_TRAP(r3)
 	li	r0,H_SUCCESS
-	std	r0,VCPU_GPR(r3)(r3)
+	std	r0,VCPU_GPR(R3)(r3)
 BEGIN_FTR_SECTION
 	b	2f		/* just send it up to host on 970 */
 END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206)
@@ -1443,7 +1443,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206)
 	addi	r6,r5,VCORE_NAPPING_THREADS
 31:	lwarx	r4,0,r6
 	or	r4,r4,r0
-	PPC_POPCNTW(r7,r4)
+	PPC_POPCNTW(R7,R4)
 	cmpw	r7,r8
 	bge	2f
 	stwcx.	r4,0,r6
@@ -1464,24 +1464,24 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206)
  * DAR, DSISR, DABR, DABRX, DSCR, PMCx, MMCRx, SIAR, SDAR.
  */
 	/* Save non-volatile GPRs */
-	std	r14, VCPU_GPR(r14)(r3)
-	std	r15, VCPU_GPR(r15)(r3)
-	std	r16, VCPU_GPR(r16)(r3)
-	std	r17, VCPU_GPR(r17)(r3)
-	std	r18, VCPU_GPR(r18)(r3)
-	std	r19, VCPU_GPR(r19)(r3)
-	std	r20, VCPU_GPR(r20)(r3)
-	std	r21, VCPU_GPR(r21)(r3)
-	std	r22, VCPU_GPR(r22)(r3)
-	std	r23, VCPU_GPR(r23)(r3)
-	std	r24, VCPU_GPR(r24)(r3)
-	std	r25, VCPU_GPR(r25)(r3)
-	std	r26, VCPU_GPR(r26)(r3)
-	std	r27, VCPU_GPR(r27)(r3)
-	std	r28, VCPU_GPR(r28)(r3)
-	std	r29, VCPU_GPR(r29)(r3)
-	std	r30, VCPU_GPR(r30)(r3)
-	std	r31, VCPU_GPR(r31)(r3)
+	std	r14, VCPU_GPR(R14)(r3)
+	std	r15, VCPU_GPR(R15)(r3)
+	std	r16, VCPU_GPR(R16)(r3)
+	std	r17, VCPU_GPR(R17)(r3)
+	std	r18, VCPU_GPR(R18)(r3)
+	std	r19, VCPU_GPR(R19)(r3)
+	std	r20, VCPU_GPR(R20)(r3)
+	std	r21, VCPU_GPR(R21)(r3)
+	std	r22, VCPU_GPR(R22)(r3)
+	std	r23, VCPU_GPR(R23)(r3)
+	std	r24, VCPU_GPR(R24)(r3)
+	std	r25, VCPU_GPR(R25)(r3)
+	std	r26, VCPU_GPR(R26)(r3)
+	std	r27, VCPU_GPR(R27)(r3)
+	std	r28, VCPU_GPR(R28)(r3)
+	std	r29, VCPU_GPR(R29)(r3)
+	std	r30, VCPU_GPR(R30)(r3)
+	std	r31, VCPU_GPR(R31)(r3)
 
 	/* save FP state */
 	bl	.kvmppc_save_fp
@@ -1513,24 +1513,24 @@ kvm_end_cede:
 	bl	kvmppc_load_fp
 
 	/* Load NV GPRS */
-	ld	r14, VCPU_GPR(r14)(r4)
-	ld	r15, VCPU_GPR(r15)(r4)
-	ld	r16, VCPU_GPR(r16)(r4)
-	ld	r17, VCPU_GPR(r17)(r4)
-	ld	r18, VCPU_GPR(r18)(r4)
-	ld	r19, VCPU_GPR(r19)(r4)
-	ld	r20, VCPU_GPR(r20)(r4)
-	ld	r21, VCPU_GPR(r21)(r4)
-	ld	r22, VCPU_GPR(r22)(r4)
-	ld	r23, VCPU_GPR(r23)(r4)
-	ld	r24, VCPU_GPR(r24)(r4)
-	ld	r25, VCPU_GPR(r25)(r4)
-	ld	r26, VCPU_GPR(r26)(r4)
-	ld	r27, VCPU_GPR(r27)(r4)
-	ld	r28, VCPU_GPR(r28)(r4)
-	ld	r29, VCPU_GPR(r29)(r4)
-	ld	r30, VCPU_GPR(r30)(r4)
-	ld	r31, VCPU_GPR(r31)(r4)
+	ld	r14, VCPU_GPR(R14)(r4)
+	ld	r15, VCPU_GPR(R15)(r4)
+	ld	r16, VCPU_GPR(R16)(r4)
+	ld	r17, VCPU_GPR(R17)(r4)
+	ld	r18, VCPU_GPR(R18)(r4)
+	ld	r19, VCPU_GPR(R19)(r4)
+	ld	r20, VCPU_GPR(R20)(r4)
+	ld	r21, VCPU_GPR(R21)(r4)
+	ld	r22, VCPU_GPR(R22)(r4)
+	ld	r23, VCPU_GPR(R23)(r4)
+	ld	r24, VCPU_GPR(R24)(r4)
+	ld	r25, VCPU_GPR(R25)(r4)
+	ld	r26, VCPU_GPR(R26)(r4)
+	ld	r27, VCPU_GPR(R27)(r4)
+	ld	r28, VCPU_GPR(R28)(r4)
+	ld	r29, VCPU_GPR(R29)(r4)
+	ld	r30, VCPU_GPR(R30)(r4)
+	ld	r31, VCPU_GPR(R31)(r4)
 
 	/* clear our bit in vcore->napping_threads */
 33:	ld	r5,HSTATE_KVM_VCORE(r13)
@@ -1649,7 +1649,7 @@ BEGIN_FTR_SECTION
 	reg = 0
 	.rept	32
 	li	r6,reg*16+VCPU_VSRS
-	STXVD2X(reg,r6,r3)
+	STXVD2X(reg,R6,R3)
 	reg = reg + 1
 	.endr
 FTR_SECTION_ELSE
@@ -1711,7 +1711,7 @@ BEGIN_FTR_SECTION
 	reg = 0
 	.rept	32
 	li	r7,reg*16+VCPU_VSRS
-	LXVD2X(reg,r7,r4)
+	LXVD2X(reg,R7,R4)
 	reg = reg + 1
 	.endr
 FTR_SECTION_ELSE
Index: clone3/arch/powerpc/lib/checksum_64.S
===================================================================
--- clone3.orig/arch/powerpc/lib/checksum_64.S
+++ clone3/arch/powerpc/lib/checksum_64.S
@@ -114,9 +114,9 @@ _GLOBAL(csum_partial)
 	mtctr	r6
 
 	stdu	r1,-STACKFRAMESIZE(r1)
-	std	r14,STK_REG(r14)(r1)
-	std	r15,STK_REG(r15)(r1)
-	std	r16,STK_REG(r16)(r1)
+	std	r14,STK_REG(R14)(r1)
+	std	r15,STK_REG(R15)(r1)
+	std	r16,STK_REG(R16)(r1)
 
 	ld	r6,0(r3)
 	ld	r9,8(r3)
@@ -175,9 +175,9 @@ _GLOBAL(csum_partial)
 	adde	r0,r0,r15
 	adde	r0,r0,r16
 
-	ld	r14,STK_REG(r14)(r1)
-	ld	r15,STK_REG(r15)(r1)
-	ld	r16,STK_REG(r16)(r1)
+	ld	r14,STK_REG(R14)(r1)
+	ld	r15,STK_REG(R15)(r1)
+	ld	r16,STK_REG(R16)(r1)
 	addi	r1,r1,STACKFRAMESIZE
 
 	andi.	r4,r4,63
@@ -299,9 +299,9 @@ dest;	sth	r6,0(r4)
 	mtctr	r6
 
 	stdu	r1,-STACKFRAMESIZE(r1)
-	std	r14,STK_REG(r14)(r1)
-	std	r15,STK_REG(r15)(r1)
-	std	r16,STK_REG(r16)(r1)
+	std	r14,STK_REG(R14)(r1)
+	std	r15,STK_REG(R15)(r1)
+	std	r16,STK_REG(R16)(r1)
 
 source;	ld	r6,0(r3)
 source;	ld	r9,8(r3)
@@ -382,9 +382,9 @@ dest;	std	r16,56(r4)
 	adde	r0,r0,r15
 	adde	r0,r0,r16
 
-	ld	r14,STK_REG(r14)(r1)
-	ld	r15,STK_REG(r15)(r1)
-	ld	r16,STK_REG(r16)(r1)
+	ld	r14,STK_REG(R14)(r1)
+	ld	r15,STK_REG(R15)(r1)
+	ld	r16,STK_REG(R16)(r1)
 	addi	r1,r1,STACKFRAMESIZE
 
 	andi.	r5,r5,63
Index: clone3/arch/powerpc/lib/copyuser_64.S
===================================================================
--- clone3.orig/arch/powerpc/lib/copyuser_64.S
+++ clone3/arch/powerpc/lib/copyuser_64.S
@@ -30,7 +30,7 @@ _GLOBAL(__copy_tofrom_user_base)
 	dcbt	0,r4
 	beq	.Lcopy_page_4K
 	andi.	r6,r6,7
-	PPC_MTOCRF(0x01,r5)
+	PPC_MTOCRF(0x01,R5)
 	blt	cr1,.Lshort_copy
 /* Below we want to nop out the bne if we're on a CPU that has the
  * CPU_FTR_UNALIGNED_LD_STD bit set and the CPU_FTR_CP_USE_DCBTZ bit
@@ -186,7 +186,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_
 	blr
 
 .Ldst_unaligned:
-	PPC_MTOCRF(0x01,r6)		/* put #bytes to 8B bdry into cr7 */
+	PPC_MTOCRF(0x01,R6)		/* put #bytes to 8B bdry into cr7 */
 	subf	r5,r6,r5
 	li	r7,0
 	cmpldi	cr1,r5,16
@@ -201,7 +201,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_
 2:	bf	cr7*4+1,3f
 37:	lwzx	r0,r7,r4
 83:	stwx	r0,r7,r3
-3:	PPC_MTOCRF(0x01,r5)
+3:	PPC_MTOCRF(0x01,R5)
 	add	r4,r6,r4
 	add	r3,r6,r3
 	b	.Ldst_aligned
Index: clone3/arch/powerpc/lib/copyuser_power7.S
===================================================================
--- clone3.orig/arch/powerpc/lib/copyuser_power7.S
+++ clone3/arch/powerpc/lib/copyuser_power7.S
@@ -57,9 +57,9 @@
 
 
 .Ldo_err4:
-	ld	r16,STK_REG(r16)(r1)
-	ld	r15,STK_REG(r15)(r1)
-	ld	r14,STK_REG(r14)(r1)
+	ld	r16,STK_REG(R16)(r1)
+	ld	r15,STK_REG(R15)(r1)
+	ld	r14,STK_REG(R14)(r1)
 .Ldo_err3:
 	bl	.exit_vmx_copy
 	ld	r0,STACKFRAMESIZE+16(r1)
@@ -68,15 +68,15 @@
 #endif /* CONFIG_ALTIVEC */
 
 .Ldo_err2:
-	ld	r22,STK_REG(r22)(r1)
-	ld	r21,STK_REG(r21)(r1)
-	ld	r20,STK_REG(r20)(r1)
-	ld	r19,STK_REG(r19)(r1)
-	ld	r18,STK_REG(r18)(r1)
-	ld	r17,STK_REG(r17)(r1)
-	ld	r16,STK_REG(r16)(r1)
-	ld	r15,STK_REG(r15)(r1)
-	ld	r14,STK_REG(r14)(r1)
+	ld	r22,STK_REG(R22)(r1)
+	ld	r21,STK_REG(R21)(r1)
+	ld	r20,STK_REG(R20)(r1)
+	ld	r19,STK_REG(R19)(r1)
+	ld	r18,STK_REG(R18)(r1)
+	ld	r17,STK_REG(R17)(r1)
+	ld	r16,STK_REG(R16)(r1)
+	ld	r15,STK_REG(R15)(r1)
+	ld	r14,STK_REG(R14)(r1)
 .Lexit:
 	addi	r1,r1,STACKFRAMESIZE
 .Ldo_err1:
@@ -137,15 +137,15 @@ err1;	stw	r0,0(r3)
 
 	mflr	r0
 	stdu	r1,-STACKFRAMESIZE(r1)
-	std	r14,STK_REG(r14)(r1)
-	std	r15,STK_REG(r15)(r1)
-	std	r16,STK_REG(r16)(r1)
-	std	r17,STK_REG(r17)(r1)
-	std	r18,STK_REG(r18)(r1)
-	std	r19,STK_REG(r19)(r1)
-	std	r20,STK_REG(r20)(r1)
-	std	r21,STK_REG(r21)(r1)
-	std	r22,STK_REG(r22)(r1)
+	std	r14,STK_REG(R14)(r1)
+	std	r15,STK_REG(R15)(r1)
+	std	r16,STK_REG(R16)(r1)
+	std	r17,STK_REG(R17)(r1)
+	std	r18,STK_REG(R18)(r1)
+	std	r19,STK_REG(R19)(r1)
+	std	r20,STK_REG(R20)(r1)
+	std	r21,STK_REG(R21)(r1)
+	std	r22,STK_REG(R22)(r1)
 	std	r0,STACKFRAMESIZE+16(r1)
 
 	srdi	r6,r5,7
@@ -192,15 +192,15 @@ err2;	std	r21,120(r3)
 
 	clrldi	r5,r5,(64-7)
 
-	ld	r14,STK_REG(r14)(r1)
-	ld	r15,STK_REG(r15)(r1)
-	ld	r16,STK_REG(r16)(r1)
-	ld	r17,STK_REG(r17)(r1)
-	ld	r18,STK_REG(r18)(r1)
-	ld	r19,STK_REG(r19)(r1)
-	ld	r20,STK_REG(r20)(r1)
-	ld	r21,STK_REG(r21)(r1)
-	ld	r22,STK_REG(r22)(r1)
+	ld	r14,STK_REG(R14)(r1)
+	ld	r15,STK_REG(R15)(r1)
+	ld	r16,STK_REG(R16)(r1)
+	ld	r17,STK_REG(R17)(r1)
+	ld	r18,STK_REG(R18)(r1)
+	ld	r19,STK_REG(R19)(r1)
+	ld	r20,STK_REG(R20)(r1)
+	ld	r21,STK_REG(R21)(r1)
+	ld	r22,STK_REG(R22)(r1)
 	addi	r1,r1,STACKFRAMESIZE
 
 	/* Up to 127B to go */
@@ -378,9 +378,9 @@ err3;	stvx	vr0,r3,r11
 7:	sub	r5,r5,r6
 	srdi	r6,r5,7
 
-	std	r14,STK_REG(r14)(r1)
-	std	r15,STK_REG(r15)(r1)
-	std	r16,STK_REG(r16)(r1)
+	std	r14,STK_REG(R14)(r1)
+	std	r15,STK_REG(R15)(r1)
+	std	r16,STK_REG(R16)(r1)
 
 	li	r12,64
 	li	r14,80
@@ -415,9 +415,9 @@ err4;	stvx	vr0,r3,r16
 	addi	r3,r3,128
 	bdnz	8b
 
-	ld	r14,STK_REG(r14)(r1)
-	ld	r15,STK_REG(r15)(r1)
-	ld	r16,STK_REG(r16)(r1)
+	ld	r14,STK_REG(R14)(r1)
+	ld	r15,STK_REG(R15)(r1)
+	ld	r16,STK_REG(R16)(r1)
 
 	/* Up to 127B to go */
 	clrldi	r5,r5,(64-7)
@@ -563,9 +563,9 @@ err3;	stvx	vr11,r3,r11
 7:	sub	r5,r5,r6
 	srdi	r6,r5,7
 
-	std	r14,STK_REG(r14)(r1)
-	std	r15,STK_REG(r15)(r1)
-	std	r16,STK_REG(r16)(r1)
+	std	r14,STK_REG(R14)(r1)
+	std	r15,STK_REG(R15)(r1)
+	std	r16,STK_REG(R16)(r1)
 
 	li	r12,64
 	li	r14,80
@@ -608,9 +608,9 @@ err4;	stvx	vr15,r3,r16
 	addi	r3,r3,128
 	bdnz	8b
 
-	ld	r14,STK_REG(r14)(r1)
-	ld	r15,STK_REG(r15)(r1)
-	ld	r16,STK_REG(r16)(r1)
+	ld	r14,STK_REG(R14)(r1)
+	ld	r15,STK_REG(R15)(r1)
+	ld	r16,STK_REG(R16)(r1)
 
 	/* Up to 127B to go */
 	clrldi	r5,r5,(64-7)
Index: clone3/arch/powerpc/lib/hweight_64.S
===================================================================
--- clone3.orig/arch/powerpc/lib/hweight_64.S
+++ clone3/arch/powerpc/lib/hweight_64.S
@@ -28,7 +28,7 @@ BEGIN_FTR_SECTION
 	nop
 	nop
 FTR_SECTION_ELSE
-	PPC_POPCNTB(r3,r3)
+	PPC_POPCNTB(R3,R3)
 	clrldi	r3,r3,64-8
 	blr
 ALT_FTR_SECTION_END_IFCLR(CPU_FTR_POPCNTB)
@@ -42,14 +42,14 @@ BEGIN_FTR_SECTION
 	nop
 FTR_SECTION_ELSE
   BEGIN_FTR_SECTION_NESTED(50)
-	PPC_POPCNTB(r3,r3)
+	PPC_POPCNTB(R3,R3)
 	srdi	r4,r3,8
 	add	r3,r4,r3
 	clrldi	r3,r3,64-8
 	blr
   FTR_SECTION_ELSE_NESTED(50)
 	clrlwi  r3,r3,16
-	PPC_POPCNTW(r3,r3)
+	PPC_POPCNTW(R3,R3)
 	clrldi	r3,r3,64-8
 	blr
   ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_POPCNTD, 50)
@@ -66,7 +66,7 @@ BEGIN_FTR_SECTION
 	nop
 FTR_SECTION_ELSE
   BEGIN_FTR_SECTION_NESTED(51)
-	PPC_POPCNTB(r3,r3)
+	PPC_POPCNTB(R3,R3)
 	srdi	r4,r3,16
 	add	r3,r4,r3
 	srdi	r4,r3,8
@@ -74,7 +74,7 @@ FTR_SECTION_ELSE
 	clrldi	r3,r3,64-8
 	blr
   FTR_SECTION_ELSE_NESTED(51)
-	PPC_POPCNTW(r3,r3)
+	PPC_POPCNTW(R3,R3)
 	clrldi	r3,r3,64-8
 	blr
   ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_POPCNTD, 51)
@@ -93,7 +93,7 @@ BEGIN_FTR_SECTION
 	nop
 FTR_SECTION_ELSE
   BEGIN_FTR_SECTION_NESTED(52)
-	PPC_POPCNTB(r3,r3)
+	PPC_POPCNTB(R3,R3)
 	srdi	r4,r3,32
 	add	r3,r4,r3
 	srdi	r4,r3,16
@@ -103,7 +103,7 @@ FTR_SECTION_ELSE
 	clrldi	r3,r3,64-8
 	blr
   FTR_SECTION_ELSE_NESTED(52)
-	PPC_POPCNTD(r3,r3)
+	PPC_POPCNTD(R3,R3)
 	clrldi	r3,r3,64-8
 	blr
   ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_POPCNTD, 52)
Index: clone3/arch/powerpc/lib/ldstfp.S
===================================================================
--- clone3.orig/arch/powerpc/lib/ldstfp.S
+++ clone3/arch/powerpc/lib/ldstfp.S
@@ -330,13 +330,13 @@ _GLOBAL(do_lxvd2x)
 	MTMSRD(r7)
 	isync
 	beq	cr7,1f
-	STXVD2X(0,r1,r8)
+	STXVD2X(0,R1,R8)
 1:	li	r9,-EFAULT
-2:	LXVD2X(0,0,r4)
+2:	LXVD2X(0,0,R4)
 	li	r9,0
 3:	beq	cr7,4f
 	bl	put_vsr
-	LXVD2X(0,r1,r8)
+	LXVD2X(0,R1,R8)
 4:	PPC_LL	r0,STKFRM+PPC_LR_STKOFF(r1)
 	mtlr	r0
 	MTMSRD(r6)
@@ -358,13 +358,13 @@ _GLOBAL(do_stxvd2x)
 	MTMSRD(r7)
 	isync
 	beq	cr7,1f
-	STXVD2X(0,r1,r8)
+	STXVD2X(0,R1,R8)
 	bl	get_vsr
 1:	li	r9,-EFAULT
-2:	STXVD2X(0,0,r4)
+2:	STXVD2X(0,0,R4)
 	li	r9,0
 3:	beq	cr7,4f
-	LXVD2X(0,r1,r8)
+	LXVD2X(0,R1,R8)
 4:	PPC_LL	r0,STKFRM+PPC_LR_STKOFF(r1)
 	mtlr	r0
 	MTMSRD(r6)
Index: clone3/arch/powerpc/lib/mem_64.S
===================================================================
--- clone3.orig/arch/powerpc/lib/mem_64.S
+++ clone3/arch/powerpc/lib/mem_64.S
@@ -19,7 +19,7 @@ _GLOBAL(memset)
 	rlwimi	r4,r4,16,0,15
 	cmplw	cr1,r5,r0		/* do we get that far? */
 	rldimi	r4,r4,32,0
-	PPC_MTOCRF(1,r0)
+	PPC_MTOCRF(1,R0)
 	mr	r6,r3
 	blt	cr1,8f
 	beq+	3f			/* if already 8-byte aligned */
@@ -49,7 +49,7 @@ _GLOBAL(memset)
 	bdnz	4b
 5:	srwi.	r0,r5,3
 	clrlwi	r5,r5,29
-	PPC_MTOCRF(1,r0)
+	PPC_MTOCRF(1,R0)
 	beq	8f
 	bf	29,6f
 	std	r4,0(r6)
@@ -65,7 +65,7 @@ _GLOBAL(memset)
 	std	r4,0(r6)
 	addi	r6,r6,8
 8:	cmpwi	r5,0
-	PPC_MTOCRF(1,r5)
+	PPC_MTOCRF(1,R5)
 	beqlr+
 	bf	29,9f
 	stw	r4,0(r6)
Index: clone3/arch/powerpc/lib/memcpy_64.S
===================================================================
--- clone3.orig/arch/powerpc/lib/memcpy_64.S
+++ clone3/arch/powerpc/lib/memcpy_64.S
@@ -12,7 +12,7 @@
 	.align	7
 _GLOBAL(memcpy)
 	std	r3,48(r1)	/* save destination pointer for return value */
-	PPC_MTOCRF(0x01,r5)
+	PPC_MTOCRF(0x01,R5)
 	cmpldi	cr1,r5,16
 	neg	r6,r3		# LS 3 bits = # bytes to 8-byte dest bdry
 	andi.	r6,r6,7
@@ -154,7 +154,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_
 	blr
 
 .Ldst_unaligned:
-	PPC_MTOCRF(0x01,r6)		# put #bytes to 8B bdry into cr7
+	PPC_MTOCRF(0x01,R6)		# put #bytes to 8B bdry into cr7
 	subf	r5,r6,r5
 	li	r7,0
 	cmpldi	cr1,r5,16
@@ -169,7 +169,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_
 2:	bf	cr7*4+1,3f
 	lwzx	r0,r7,r4
 	stwx	r0,r7,r3
-3:	PPC_MTOCRF(0x01,r5)
+3:	PPC_MTOCRF(0x01,R5)
 	add	r4,r6,r4
 	add	r3,r6,r3
 	b	.Ldst_aligned
Index: clone3/arch/powerpc/mm/hash_low_64.S
===================================================================
--- clone3.orig/arch/powerpc/mm/hash_low_64.S
+++ clone3/arch/powerpc/mm/hash_low_64.S
@@ -64,9 +64,9 @@ _GLOBAL(__hash_page_4K)
 	std	r0,16(r1)
 	stdu	r1,-STACKFRAMESIZE(r1)
 	/* Save all params that we need after a function call */
-	std	r6,STK_PARM(r6)(r1)
-	std	r8,STK_PARM(r8)(r1)
-	std	r9,STK_PARM(r9)(r1)
+	std	r6,STK_PARM(R6)(r1)
+	std	r8,STK_PARM(R8)(r1)
+	std	r9,STK_PARM(R9)(r1)
 	
 	/* Save non-volatile registers.
 	 * r31 will hold "old PTE"
@@ -75,11 +75,11 @@ _GLOBAL(__hash_page_4K)
 	 * r28 is a hash value
 	 * r27 is hashtab mask (maybe dynamic patched instead ?)
 	 */
-	std	r27,STK_REG(r27)(r1)
-	std	r28,STK_REG(r28)(r1)
-	std	r29,STK_REG(r29)(r1)
-	std	r30,STK_REG(r30)(r1)
-	std	r31,STK_REG(r31)(r1)
+	std	r27,STK_REG(R27)(r1)
+	std	r28,STK_REG(R28)(r1)
+	std	r29,STK_REG(R29)(r1)
+	std	r30,STK_REG(R30)(r1)
+	std	r31,STK_REG(R31)(r1)
 	
 	/* Step 1:
 	 *
@@ -162,7 +162,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FT
 	/* At this point, r3 contains new PP bits, save them in
 	 * place of "access" in the param area (sic)
 	 */
-	std	r3,STK_PARM(r4)(r1)
+	std	r3,STK_PARM(R4)(r1)
 
 	/* Get htab_hash_mask */
 	ld	r4,htab_hash_mask@got(2)
@@ -192,11 +192,11 @@ htab_insert_pte:
 	rldicr	r3,r0,3,63-3		/* r3 = (hash & mask) << 3 */
 
 	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARM(r4)(r1)	/* Retrieve new pp bits */
+	ld	r6,STK_PARM(R4)(r1)	/* Retrieve new pp bits */
 	mr	r4,r29			/* Retrieve va */
 	li	r7,0			/* !bolted, !secondary */
 	li	r8,MMU_PAGE_4K		/* page size */
-	ld	r9,STK_PARM(r9)(r1)	/* segment size */
+	ld	r9,STK_PARM(R9)(r1)	/* segment size */
 _GLOBAL(htab_call_hpte_insert1)
 	bl	.			/* Patched by htab_finish_init() */
 	cmpdi	0,r3,0
@@ -215,11 +215,11 @@ _GLOBAL(htab_call_hpte_insert1)
 	rldicr	r3,r0,3,63-3	/* r0 = (~hash & mask) << 3 */
 	
 	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARM(r4)(r1)	/* Retrieve new pp bits */
+	ld	r6,STK_PARM(R4)(r1)	/* Retrieve new pp bits */
 	mr	r4,r29			/* Retrieve va */
 	li	r7,HPTE_V_SECONDARY	/* !bolted, secondary */
 	li	r8,MMU_PAGE_4K		/* page size */
-	ld	r9,STK_PARM(r9)(r1)	/* segment size */
+	ld	r9,STK_PARM(R9)(r1)	/* segment size */
 _GLOBAL(htab_call_hpte_insert2)
 	bl	.			/* Patched by htab_finish_init() */
 	cmpdi	0,r3,0
@@ -255,15 +255,15 @@ htab_pte_insert_ok:
 	 * (maybe add eieio may be good still ?)
 	 */
 htab_write_out_pte:
-	ld	r6,STK_PARM(r6)(r1)
+	ld	r6,STK_PARM(R6)(r1)
 	std	r30,0(r6)
 	li	r3, 0
 htab_bail:
-	ld	r27,STK_REG(r27)(r1)
-	ld	r28,STK_REG(r28)(r1)
-	ld	r29,STK_REG(r29)(r1)
-	ld      r30,STK_REG(r30)(r1)
-	ld      r31,STK_REG(r31)(r1)
+	ld	r27,STK_REG(R27)(r1)
+	ld	r28,STK_REG(R28)(r1)
+	ld	r29,STK_REG(R29)(r1)
+	ld      r30,STK_REG(R30)(r1)
+	ld      r31,STK_REG(R31)(r1)
 	addi    r1,r1,STACKFRAMESIZE
 	ld      r0,16(r1)
 	mtlr    r0
@@ -288,8 +288,8 @@ htab_modify_pte:
 	/* Call ppc_md.hpte_updatepp */
 	mr	r5,r29			/* va */
 	li	r6,MMU_PAGE_4K		/* page size */
-	ld	r7,STK_PARM(r9)(r1)	/* segment size */
-	ld	r8,STK_PARM(r8)(r1)	/* get "local" param */
+	ld	r7,STK_PARM(R9)(r1)	/* segment size */
+	ld	r8,STK_PARM(R8)(r1)	/* get "local" param */
 _GLOBAL(htab_call_hpte_updatepp)
 	bl	.			/* Patched by htab_finish_init() */
 
@@ -312,7 +312,7 @@ htab_wrong_access:
 
 htab_pte_insert_failure:
 	/* Bail out restoring old PTE */
-	ld	r6,STK_PARM(r6)(r1)
+	ld	r6,STK_PARM(R6)(r1)
 	std	r31,0(r6)
 	li	r3,-1
 	b	htab_bail
@@ -340,9 +340,9 @@ _GLOBAL(__hash_page_4K)
 	std	r0,16(r1)
 	stdu	r1,-STACKFRAMESIZE(r1)
 	/* Save all params that we need after a function call */
-	std	r6,STK_PARM(r6)(r1)
-	std	r8,STK_PARM(r8)(r1)
-	std	r9,STK_PARM(r9)(r1)
+	std	r6,STK_PARM(R6)(r1)
+	std	r8,STK_PARM(R8)(r1)
+	std	r9,STK_PARM(R9)(r1)
 
 	/* Save non-volatile registers.
 	 * r31 will hold "old PTE"
@@ -353,13 +353,13 @@ _GLOBAL(__hash_page_4K)
 	 * r26 is the hidx mask
 	 * r25 is the index in combo page
 	 */
-	std	r25,STK_REG(r25)(r1)
-	std	r26,STK_REG(r26)(r1)
-	std	r27,STK_REG(r27)(r1)
-	std	r28,STK_REG(r28)(r1)
-	std	r29,STK_REG(r29)(r1)
-	std	r30,STK_REG(r30)(r1)
-	std	r31,STK_REG(r31)(r1)
+	std	r25,STK_REG(R25)(r1)
+	std	r26,STK_REG(R26)(r1)
+	std	r27,STK_REG(R27)(r1)
+	std	r28,STK_REG(R28)(r1)
+	std	r29,STK_REG(R29)(r1)
+	std	r30,STK_REG(R30)(r1)
+	std	r31,STK_REG(R31)(r1)
 
 	/* Step 1:
 	 *
@@ -452,7 +452,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FT
 	/* At this point, r3 contains new PP bits, save them in
 	 * place of "access" in the param area (sic)
 	 */
-	std	r3,STK_PARM(r4)(r1)
+	std	r3,STK_PARM(R4)(r1)
 
 	/* Get htab_hash_mask */
 	ld	r4,htab_hash_mask@got(2)
@@ -473,7 +473,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FT
 	andis.	r0,r31,_PAGE_COMBO@h
 	beq	htab_inval_old_hpte
 
-	ld	r6,STK_PARM(r6)(r1)
+	ld	r6,STK_PARM(R6)(r1)
 	ori	r26,r6,0x8000		/* Load the hidx mask */
 	ld	r26,0(r26)
 	addi	r5,r25,36		/* Check actual HPTE_SUB bit, this */
@@ -495,11 +495,11 @@ htab_special_pfn:
 	rldicr	r3,r0,3,63-3		/* r0 = (hash & mask) << 3 */
 
 	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARM(r4)(r1)	/* Retrieve new pp bits */
+	ld	r6,STK_PARM(R4)(r1)	/* Retrieve new pp bits */
 	mr	r4,r29			/* Retrieve va */
 	li	r7,0			/* !bolted, !secondary */
 	li	r8,MMU_PAGE_4K		/* page size */
-	ld	r9,STK_PARM(r9)(r1)	/* segment size */
+	ld	r9,STK_PARM(R9)(r1)	/* segment size */
 _GLOBAL(htab_call_hpte_insert1)
 	bl	.			/* patched by htab_finish_init() */
 	cmpdi	0,r3,0
@@ -522,11 +522,11 @@ _GLOBAL(htab_call_hpte_insert1)
 	rldicr	r3,r0,3,63-3		/* r0 = (~hash & mask) << 3 */
 
 	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARM(r4)(r1)	/* Retrieve new pp bits */
+	ld	r6,STK_PARM(R4)(r1)	/* Retrieve new pp bits */
 	mr	r4,r29			/* Retrieve va */
 	li	r7,HPTE_V_SECONDARY	/* !bolted, secondary */
 	li	r8,MMU_PAGE_4K		/* page size */
-	ld	r9,STK_PARM(r9)(r1)	/* segment size */
+	ld	r9,STK_PARM(R9)(r1)	/* segment size */
 _GLOBAL(htab_call_hpte_insert2)
 	bl	.			/* patched by htab_finish_init() */
 	cmpdi	0,r3,0
@@ -559,8 +559,8 @@ htab_inval_old_hpte:
 	mr	r4,r31			/* PTE.pte */
 	li	r5,0			/* PTE.hidx */
 	li	r6,MMU_PAGE_64K		/* psize */
-	ld	r7,STK_PARM(r9)(r1)	/* ssize */
-	ld	r8,STK_PARM(r8)(r1)	/* local */
+	ld	r7,STK_PARM(R9)(r1)	/* ssize */
+	ld	r8,STK_PARM(R8)(r1)	/* local */
 	bl	.flush_hash_page
 	/* Clear out _PAGE_HPTE_SUB bits in the new linux PTE */
 	lis	r0,_PAGE_HPTE_SUB@h
@@ -576,7 +576,7 @@ htab_pte_insert_ok:
 	/* Insert slot number & secondary bit in PTE second half,
 	 * clear _PAGE_BUSY and set approriate HPTE slot bit
 	 */
-	ld	r6,STK_PARM(r6)(r1)
+	ld	r6,STK_PARM(R6)(r1)
 	li	r0,_PAGE_BUSY
 	andc	r30,r30,r0
 	/* HPTE SUB bit */
@@ -597,13 +597,13 @@ htab_pte_insert_ok:
 	std	r30,0(r6)
 	li	r3, 0
 htab_bail:
-	ld	r25,STK_REG(r25)(r1)
-	ld	r26,STK_REG(r26)(r1)
-	ld	r27,STK_REG(r27)(r1)
-	ld	r28,STK_REG(r28)(r1)
-	ld	r29,STK_REG(r29)(r1)
-	ld      r30,STK_REG(r30)(r1)
-	ld      r31,STK_REG(r31)(r1)
+	ld	r25,STK_REG(R25)(r1)
+	ld	r26,STK_REG(R26)(r1)
+	ld	r27,STK_REG(R27)(r1)
+	ld	r28,STK_REG(R28)(r1)
+	ld	r29,STK_REG(R29)(r1)
+	ld      r30,STK_REG(R30)(r1)
+	ld      r31,STK_REG(R31)(r1)
 	addi    r1,r1,STACKFRAMESIZE
 	ld      r0,16(r1)
 	mtlr    r0
@@ -630,8 +630,8 @@ htab_modify_pte:
 	/* Call ppc_md.hpte_updatepp */
 	mr	r5,r29			/* va */
 	li	r6,MMU_PAGE_4K		/* page size */
-	ld	r7,STK_PARM(r9)(r1)	/* segment size */
-	ld	r8,STK_PARM(r8)(r1)	/* get "local" param */
+	ld	r7,STK_PARM(R9)(r1)	/* segment size */
+	ld	r8,STK_PARM(R8)(r1)	/* get "local" param */
 _GLOBAL(htab_call_hpte_updatepp)
 	bl	.			/* patched by htab_finish_init() */
 
@@ -644,7 +644,7 @@ _GLOBAL(htab_call_hpte_updatepp)
 	/* Clear the BUSY bit and Write out the PTE */
 	li	r0,_PAGE_BUSY
 	andc	r30,r30,r0
-	ld	r6,STK_PARM(r6)(r1)
+	ld	r6,STK_PARM(R6)(r1)
 	std	r30,0(r6)
 	li	r3,0
 	b	htab_bail
@@ -657,7 +657,7 @@ htab_wrong_access:
 
 htab_pte_insert_failure:
 	/* Bail out restoring old PTE */
-	ld	r6,STK_PARM(r6)(r1)
+	ld	r6,STK_PARM(R6)(r1)
 	std	r31,0(r6)
 	li	r3,-1
 	b	htab_bail
@@ -677,9 +677,9 @@ _GLOBAL(__hash_page_64K)
 	std	r0,16(r1)
 	stdu	r1,-STACKFRAMESIZE(r1)
 	/* Save all params that we need after a function call */
-	std	r6,STK_PARM(r6)(r1)
-	std	r8,STK_PARM(r8)(r1)
-	std	r9,STK_PARM(r9)(r1)
+	std	r6,STK_PARM(R6)(r1)
+	std	r8,STK_PARM(R8)(r1)
+	std	r9,STK_PARM(R9)(r1)
 
 	/* Save non-volatile registers.
 	 * r31 will hold "old PTE"
@@ -688,11 +688,11 @@ _GLOBAL(__hash_page_64K)
 	 * r28 is a hash value
 	 * r27 is hashtab mask (maybe dynamic patched instead ?)
 	 */
-	std	r27,STK_REG(r27)(r1)
-	std	r28,STK_REG(r28)(r1)
-	std	r29,STK_REG(r29)(r1)
-	std	r30,STK_REG(r30)(r1)
-	std	r31,STK_REG(r31)(r1)
+	std	r27,STK_REG(R27)(r1)
+	std	r28,STK_REG(R28)(r1)
+	std	r29,STK_REG(R29)(r1)
+	std	r30,STK_REG(R30)(r1)
+	std	r31,STK_REG(R31)(r1)
 
 	/* Step 1:
 	 *
@@ -780,7 +780,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FT
 	/* At this point, r3 contains new PP bits, save them in
 	 * place of "access" in the param area (sic)
 	 */
-	std	r3,STK_PARM(r4)(r1)
+	std	r3,STK_PARM(R4)(r1)
 
 	/* Get htab_hash_mask */
 	ld	r4,htab_hash_mask@got(2)
@@ -813,11 +813,11 @@ ht64_insert_pte:
 	rldicr	r3,r0,3,63-3	/* r0 = (hash & mask) << 3 */
 
 	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARM(r4)(r1)	/* Retrieve new pp bits */
+	ld	r6,STK_PARM(R4)(r1)	/* Retrieve new pp bits */
 	mr	r4,r29			/* Retrieve va */
 	li	r7,0			/* !bolted, !secondary */
 	li	r8,MMU_PAGE_64K
-	ld	r9,STK_PARM(r9)(r1)	/* segment size */
+	ld	r9,STK_PARM(R9)(r1)	/* segment size */
 _GLOBAL(ht64_call_hpte_insert1)
 	bl	.			/* patched by htab_finish_init() */
 	cmpdi	0,r3,0
@@ -836,11 +836,11 @@ _GLOBAL(ht64_call_hpte_insert1)
 	rldicr	r3,r0,3,63-3	/* r0 = (~hash & mask) << 3 */
 
 	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARM(r4)(r1)	/* Retrieve new pp bits */
+	ld	r6,STK_PARM(R4)(r1)	/* Retrieve new pp bits */
 	mr	r4,r29			/* Retrieve va */
 	li	r7,HPTE_V_SECONDARY	/* !bolted, secondary */
 	li	r8,MMU_PAGE_64K
-	ld	r9,STK_PARM(r9)(r1)	/* segment size */
+	ld	r9,STK_PARM(R9)(r1)	/* segment size */
 _GLOBAL(ht64_call_hpte_insert2)
 	bl	.			/* patched by htab_finish_init() */
 	cmpdi	0,r3,0
@@ -876,15 +876,15 @@ ht64_pte_insert_ok:
 	 * (maybe add eieio may be good still ?)
 	 */
 ht64_write_out_pte:
-	ld	r6,STK_PARM(r6)(r1)
+	ld	r6,STK_PARM(R6)(r1)
 	std	r30,0(r6)
 	li	r3, 0
 ht64_bail:
-	ld	r27,STK_REG(r27)(r1)
-	ld	r28,STK_REG(r28)(r1)
-	ld	r29,STK_REG(r29)(r1)
-	ld      r30,STK_REG(r30)(r1)
-	ld      r31,STK_REG(r31)(r1)
+	ld	r27,STK_REG(R27)(r1)
+	ld	r28,STK_REG(R28)(r1)
+	ld	r29,STK_REG(R29)(r1)
+	ld      r30,STK_REG(R30)(r1)
+	ld      r31,STK_REG(R31)(r1)
 	addi    r1,r1,STACKFRAMESIZE
 	ld      r0,16(r1)
 	mtlr    r0
@@ -909,8 +909,8 @@ ht64_modify_pte:
 	/* Call ppc_md.hpte_updatepp */
 	mr	r5,r29			/* va */
 	li	r6,MMU_PAGE_64K
-	ld	r7,STK_PARM(r9)(r1)	/* segment size */
-	ld	r8,STK_PARM(r8)(r1)	/* get "local" param */
+	ld	r7,STK_PARM(R9)(r1)	/* segment size */
+	ld	r8,STK_PARM(R8)(r1)	/* get "local" param */
 _GLOBAL(ht64_call_hpte_updatepp)
 	bl	.			/* patched by htab_finish_init() */
 
@@ -933,7 +933,7 @@ ht64_wrong_access:
 
 ht64_pte_insert_failure:
 	/* Bail out restoring old PTE */
-	ld	r6,STK_PARM(r6)(r1)
+	ld	r6,STK_PARM(R6)(r1)
 	std	r31,0(r6)
 	li	r3,-1
 	b	ht64_bail
Index: clone3/arch/powerpc/mm/tlb_low_64e.S
===================================================================
--- clone3.orig/arch/powerpc/mm/tlb_low_64e.S
+++ clone3/arch/powerpc/mm/tlb_low_64e.S
@@ -126,7 +126,7 @@ BEGIN_MMU_FTR_SECTION
 	/* Set the TLB reservation and search for existing entry. Then load
 	 * the entry.
 	 */
-	PPC_TLBSRX_DOT(0,r16)
+	PPC_TLBSRX_DOT(R0,R16)
 	ldx	r14,r14,r15		/* grab pgd entry */
 	beq	normal_tlb_miss_done	/* tlb exists already, bail */
 MMU_FTR_SECTION_ELSE
@@ -395,7 +395,7 @@ BEGIN_MMU_FTR_SECTION
 	/* Set the TLB reservation and search for existing entry. Then load
 	 * the entry.
 	 */
-	PPC_TLBSRX_DOT(0,r16)
+	PPC_TLBSRX_DOT(R0,R16)
 	ld	r14,0(r10)
 	beq	normal_tlb_miss_done
 MMU_FTR_SECTION_ELSE
@@ -528,7 +528,7 @@ BEGIN_MMU_FTR_SECTION
 	/* Search if we already have a TLB entry for that virtual address, and
 	 * if we do, bail out.
 	 */
-	PPC_TLBSRX_DOT(0,r16)
+	PPC_TLBSRX_DOT(R0,R16)
 	beq	virt_page_table_tlb_miss_done
 END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_TLBRSRV)
 
@@ -779,7 +779,7 @@ htw_tlb_miss:
 	 *
 	 * MAS1:IND should be already set based on MAS4
 	 */
-	PPC_TLBSRX_DOT(0,r16)
+	PPC_TLBSRX_DOT(R0,R16)
 	beq	htw_tlb_miss_done
 
 	/* Now, we need to walk the page tables. First check if we are in
@@ -919,7 +919,7 @@ tlb_load_linear:
 	mtspr	SPRN_MAS1,r15
 
 	/* Already somebody there ? */
-	PPC_TLBSRX_DOT(0,r16)
+	PPC_TLBSRX_DOT(R0,R16)
 	beq	tlb_load_linear_done
 
 	/* Now we build the remaining MAS. MAS0 and 2 should be fine
Index: clone3/arch/powerpc/mm/tlb_nohash_low.S
===================================================================
--- clone3.orig/arch/powerpc/mm/tlb_nohash_low.S
+++ clone3/arch/powerpc/mm/tlb_nohash_low.S
@@ -313,7 +313,7 @@ BEGIN_MMU_FTR_SECTION
 	mtspr	SPRN_MAS1,r4
 	tlbwe
 MMU_FTR_SECTION_ELSE
-	PPC_TLBILX_VA(0,r3)
+	PPC_TLBILX_VA(R0,R3)
 ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
 	msync
 	isync
@@ -364,7 +364,7 @@ _GLOBAL(_tlbil_va)
 	beq	1f
 	rlwimi	r4,r6,MAS6_SIND_SHIFT,MAS6_SIND
 1:	mtspr	SPRN_MAS6,r4		/* assume AS=0 for now */
-	PPC_TLBILX_VA(0,r3)
+	PPC_TLBILX_VA(R0,R3)
 	msync
 	isync
 	wrtee	r10
@@ -379,7 +379,7 @@ _GLOBAL(_tlbivax_bcast)
 	beq	1f
 	rlwimi	r4,r6,MAS6_SIND_SHIFT,MAS6_SIND
 1:	mtspr	SPRN_MAS6,r4		/* assume AS=0 for now */
-	PPC_TLBIVAX(0,r3)
+	PPC_TLBIVAX(R0,R3)
 	eieio
 	tlbsync
 	sync
Index: clone3/arch/powerpc/platforms/cell/beat_hvCall.S
===================================================================
--- clone3.orig/arch/powerpc/platforms/cell/beat_hvCall.S
+++ clone3/arch/powerpc/platforms/cell/beat_hvCall.S
@@ -74,7 +74,7 @@ _GLOBAL(beat_hcall_norets8)
 	mr	r6,r7
 	mr	r7,r8
 	mr	r8,r9
-	ld	r10,STK_PARM(r10)(r1)
+	ld	r10,STK_PARM(R10)(r1)
 
 	HVSC				/* invoke the hypervisor */
 
@@ -94,7 +94,7 @@ _GLOBAL(beat_hcall1)
 
 	HCALL_INST_PRECALL
 
-	std	r4,STK_PARM(r4)(r1)	/* save ret buffer */
+	std	r4,STK_PARM(R4)(r1)	/* save ret buffer */
 
 	mr	r11,r3
 	mr	r3,r5
@@ -108,7 +108,7 @@ _GLOBAL(beat_hcall1)
 
 	HCALL_INST_POSTCALL
 
-	ld	r12,STK_PARM(r4)(r1)
+	ld	r12,STK_PARM(R4)(r1)
 	std	r4,  0(r12)
 
 	lwz	r0,8(r1)
@@ -125,7 +125,7 @@ _GLOBAL(beat_hcall2)
 
 	HCALL_INST_PRECALL
 
-	std	r4,STK_PARM(r4)(r1)	/* save ret buffer */
+	std	r4,STK_PARM(R4)(r1)	/* save ret buffer */
 
 	mr	r11,r3
 	mr	r3,r5
@@ -139,7 +139,7 @@ _GLOBAL(beat_hcall2)
 
 	HCALL_INST_POSTCALL
 
-	ld	r12,STK_PARM(r4)(r1)
+	ld	r12,STK_PARM(R4)(r1)
 	std	r4,  0(r12)
 	std	r5,  8(r12)
 
@@ -157,7 +157,7 @@ _GLOBAL(beat_hcall3)
 
 	HCALL_INST_PRECALL
 
-	std	r4,STK_PARM(r4)(r1)	/* save ret buffer */
+	std	r4,STK_PARM(R4)(r1)	/* save ret buffer */
 
 	mr	r11,r3
 	mr	r3,r5
@@ -171,7 +171,7 @@ _GLOBAL(beat_hcall3)
 
 	HCALL_INST_POSTCALL
 
-	ld	r12,STK_PARM(r4)(r1)
+	ld	r12,STK_PARM(R4)(r1)
 	std	r4,  0(r12)
 	std	r5,  8(r12)
 	std	r6, 16(r12)
@@ -190,7 +190,7 @@ _GLOBAL(beat_hcall4)
 
 	HCALL_INST_PRECALL
 
-	std	r4,STK_PARM(r4)(r1)	/* save ret buffer */
+	std	r4,STK_PARM(R4)(r1)	/* save ret buffer */
 
 	mr	r11,r3
 	mr	r3,r5
@@ -204,7 +204,7 @@ _GLOBAL(beat_hcall4)
 
 	HCALL_INST_POSTCALL
 
-	ld	r12,STK_PARM(r4)(r1)
+	ld	r12,STK_PARM(R4)(r1)
 	std	r4,  0(r12)
 	std	r5,  8(r12)
 	std	r6, 16(r12)
@@ -224,7 +224,7 @@ _GLOBAL(beat_hcall5)
 
 	HCALL_INST_PRECALL
 
-	std	r4,STK_PARM(r4)(r1)	/* save ret buffer */
+	std	r4,STK_PARM(R4)(r1)	/* save ret buffer */
 
 	mr	r11,r3
 	mr	r3,r5
@@ -238,7 +238,7 @@ _GLOBAL(beat_hcall5)
 
 	HCALL_INST_POSTCALL
 
-	ld	r12,STK_PARM(r4)(r1)
+	ld	r12,STK_PARM(R4)(r1)
 	std	r4,  0(r12)
 	std	r5,  8(r12)
 	std	r6, 16(r12)
@@ -259,7 +259,7 @@ _GLOBAL(beat_hcall6)
 
 	HCALL_INST_PRECALL
 
-	std	r4,STK_PARM(r4)(r1)	/* save ret buffer */
+	std	r4,STK_PARM(R4)(r1)	/* save ret buffer */
 
 	mr	r11,r3
 	mr	r3,r5
@@ -273,7 +273,7 @@ _GLOBAL(beat_hcall6)
 
 	HCALL_INST_POSTCALL
 
-	ld	r12,STK_PARM(r4)(r1)
+	ld	r12,STK_PARM(R4)(r1)
 	std	r4,  0(r12)
 	std	r5,  8(r12)
 	std	r6, 16(r12)
Index: clone3/arch/powerpc/platforms/powernv/opal-takeover.S
===================================================================
--- clone3.orig/arch/powerpc/platforms/powernv/opal-takeover.S
+++ clone3/arch/powerpc/platforms/powernv/opal-takeover.S
@@ -23,14 +23,14 @@
 _GLOBAL(opal_query_takeover)
 	mfcr	r0
 	stw	r0,8(r1)
-	std	r3,STK_PARAM(r3)(r1)
-	std	r4,STK_PARAM(r4)(r1)
+	std	r3,STK_PARAM(R3)(r1)
+	std	r4,STK_PARAM(R4)(r1)
 	li	r3,H_HAL_TAKEOVER
 	li	r4,H_HAL_TAKEOVER_QUERY_MAGIC
 	HVSC
-	ld	r10,STK_PARAM(r3)(r1)
+	ld	r10,STK_PARAM(R3)(r1)
 	std	r4,0(r10)
-	ld	r10,STK_PARAM(r4)(r1)
+	ld	r10,STK_PARAM(R4)(r1)
 	std	r5,0(r10)
 	lwz	r0,8(r1)
 	mtcrf	0xff,r0
Index: clone3/arch/powerpc/platforms/powernv/opal-wrappers.S
===================================================================
--- clone3.orig/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ clone3/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -32,7 +32,7 @@
 	std	r12,PACASAVEDMSR(r13);	\
 	andc	r12,r12,r0;		\
 	mtmsrd	r12,1;			\
-	LOAD_REG_ADDR(r0,.opal_return);	\
+	LOAD_REG_ADDR(R0,.opal_return);	\
 	mtlr	r0;			\
 	li	r0,MSR_DR|MSR_IR;	\
 	andc	r12,r12,r0;		\
Index: clone3/arch/powerpc/platforms/pseries/hvCall.S
===================================================================
--- clone3.orig/arch/powerpc/platforms/pseries/hvCall.S
+++ clone3/arch/powerpc/platforms/pseries/hvCall.S
@@ -40,28 +40,28 @@ END_FTR_SECTION(0, 1);						\
 	cmpdi	r12,0;						\
 	beq+	1f;						\
 	mflr	r0;						\
-	std	r3,STK_PARM(r3)(r1);				\
-	std	r4,STK_PARM(r4)(r1);				\
-	std	r5,STK_PARM(r5)(r1);				\
-	std	r6,STK_PARM(r6)(r1);				\
-	std	r7,STK_PARM(r7)(r1);				\
-	std	r8,STK_PARM(r8)(r1);				\
-	std	r9,STK_PARM(r9)(r1);				\
-	std	r10,STK_PARM(r10)(r1);				\
+	std	r3,STK_PARM(R3)(r1);				\
+	std	r4,STK_PARM(R4)(r1);				\
+	std	r5,STK_PARM(R5)(r1);				\
+	std	r6,STK_PARM(R6)(r1);				\
+	std	r7,STK_PARM(R7)(r1);				\
+	std	r8,STK_PARM(R8)(r1);				\
+	std	r9,STK_PARM(R9)(r1);				\
+	std	r10,STK_PARM(R10)(r1);				\
 	std	r0,16(r1);					\
 	addi	r4,r1,STK_PARM(FIRST_REG);			\
 	stdu	r1,-STACK_FRAME_OVERHEAD(r1);			\
 	bl	.__trace_hcall_entry;				\
 	addi	r1,r1,STACK_FRAME_OVERHEAD;			\
 	ld	r0,16(r1);					\
-	ld	r3,STK_PARM(r3)(r1);				\
-	ld	r4,STK_PARM(r4)(r1);				\
-	ld	r5,STK_PARM(r5)(r1);				\
-	ld	r6,STK_PARM(r6)(r1);				\
-	ld	r7,STK_PARM(r7)(r1);				\
-	ld	r8,STK_PARM(r8)(r1);				\
-	ld	r9,STK_PARM(r9)(r1);				\
-	ld	r10,STK_PARM(r10)(r1);				\
+	ld	r3,STK_PARM(R3)(r1);				\
+	ld	r4,STK_PARM(R4)(r1);				\
+	ld	r5,STK_PARM(R5)(r1);				\
+	ld	r6,STK_PARM(R6)(r1);				\
+	ld	r7,STK_PARM(R7)(r1);				\
+	ld	r8,STK_PARM(R8)(r1);				\
+	ld	r9,STK_PARM(R9)(r1);				\
+	ld	r10,STK_PARM(R10)(r1);				\
 	mtlr	r0;						\
 1:
 
@@ -79,8 +79,8 @@ END_FTR_SECTION(0, 1);						\
 	cmpdi	r12,0;						\
 	beq+	1f;						\
 	mflr	r0;						\
-	ld	r6,STK_PARM(r3)(r1);				\
-	std	r3,STK_PARM(r3)(r1);				\
+	ld	r6,STK_PARM(R3)(r1);				\
+	std	r3,STK_PARM(R3)(r1);				\
 	mr	r4,r3;						\
 	mr	r3,r6;						\
 	std	r0,16(r1);					\
@@ -88,7 +88,7 @@ END_FTR_SECTION(0, 1);						\
 	bl	.__trace_hcall_exit;				\
 	addi	r1,r1,STACK_FRAME_OVERHEAD;			\
 	ld	r0,16(r1);					\
-	ld	r3,STK_PARM(r3)(r1);				\
+	ld	r3,STK_PARM(R3)(r1);				\
 	mtlr	r0;						\
 1:
 
@@ -114,7 +114,7 @@ _GLOBAL(plpar_hcall_norets)
 	mfcr	r0
 	stw	r0,8(r1)
 
-	HCALL_INST_PRECALL(r4)
+	HCALL_INST_PRECALL(R4)
 
 	HVSC				/* invoke the hypervisor */
 
@@ -130,9 +130,9 @@ _GLOBAL(plpar_hcall)
 	mfcr	r0
 	stw	r0,8(r1)
 
-	HCALL_INST_PRECALL(r5)
+	HCALL_INST_PRECALL(R5)
 
-	std     r4,STK_PARM(r4)(r1)     /* Save ret buffer */
+	std     r4,STK_PARM(R4)(r1)     /* Save ret buffer */
 
 	mr	r4,r5
 	mr	r5,r6
@@ -143,7 +143,7 @@ _GLOBAL(plpar_hcall)
 
 	HVSC				/* invoke the hypervisor */
 
-	ld	r12,STK_PARM(r4)(r1)
+	ld	r12,STK_PARM(R4)(r1)
 	std	r4,  0(r12)
 	std	r5,  8(r12)
 	std	r6, 16(r12)
@@ -168,7 +168,7 @@ _GLOBAL(plpar_hcall_raw)
 	mfcr	r0
 	stw	r0,8(r1)
 
-	std     r4,STK_PARM(r4)(r1)     /* Save ret buffer */
+	std     r4,STK_PARM(R4)(r1)     /* Save ret buffer */
 
 	mr	r4,r5
 	mr	r5,r6
@@ -179,7 +179,7 @@ _GLOBAL(plpar_hcall_raw)
 
 	HVSC				/* invoke the hypervisor */
 
-	ld	r12,STK_PARM(r4)(r1)
+	ld	r12,STK_PARM(R4)(r1)
 	std	r4,  0(r12)
 	std	r5,  8(r12)
 	std	r6, 16(r12)
@@ -196,9 +196,9 @@ _GLOBAL(plpar_hcall9)
 	mfcr	r0
 	stw	r0,8(r1)
 
-	HCALL_INST_PRECALL(r5)
+	HCALL_INST_PRECALL(R5)
 
-	std     r4,STK_PARM(r4)(r1)     /* Save ret buffer */
+	std     r4,STK_PARM(R4)(r1)     /* Save ret buffer */
 
 	mr	r4,r5
 	mr	r5,r6
@@ -206,14 +206,14 @@ _GLOBAL(plpar_hcall9)
 	mr	r7,r8
 	mr	r8,r9
 	mr	r9,r10
-	ld	r10,STK_PARM(r11)(r1)	 /* put arg7 in R10 */
-	ld	r11,STK_PARM(r12)(r1)	 /* put arg8 in R11 */
-	ld	r12,STK_PARM(r13)(r1)    /* put arg9 in R12 */
+	ld	r10,STK_PARM(R11)(r1)	 /* put arg7 in R10 */
+	ld	r11,STK_PARM(R12)(r1)	 /* put arg8 in R11 */
+	ld	r12,STK_PARM(R13)(r1)    /* put arg9 in R12 */
 
 	HVSC				/* invoke the hypervisor */
 
 	mr	r0,r12
-	ld	r12,STK_PARM(r4)(r1)
+	ld	r12,STK_PARM(R4)(r1)
 	std	r4,  0(r12)
 	std	r5,  8(r12)
 	std	r6, 16(r12)
@@ -238,7 +238,7 @@ _GLOBAL(plpar_hcall9_raw)
 	mfcr	r0
 	stw	r0,8(r1)
 
-	std     r4,STK_PARM(r4)(r1)     /* Save ret buffer */
+	std     r4,STK_PARM(R4)(r1)     /* Save ret buffer */
 
 	mr	r4,r5
 	mr	r5,r6
@@ -246,14 +246,14 @@ _GLOBAL(plpar_hcall9_raw)
 	mr	r7,r8
 	mr	r8,r9
 	mr	r9,r10
-	ld	r10,STK_PARM(r11)(r1)	 /* put arg7 in R10 */
-	ld	r11,STK_PARM(r12)(r1)	 /* put arg8 in R11 */
-	ld	r12,STK_PARM(r13)(r1)    /* put arg9 in R12 */
+	ld	r10,STK_PARM(R11)(r1)	 /* put arg7 in R10 */
+	ld	r11,STK_PARM(R12)(r1)	 /* put arg8 in R11 */
+	ld	r12,STK_PARM(R13)(r1)    /* put arg9 in R12 */
 
 	HVSC				/* invoke the hypervisor */
 
 	mr	r0,r12
-	ld	r12,STK_PARM(r4)(r1)
+	ld	r12,STK_PARM(R4)(r1)
 	std	r4,  0(r12)
 	std	r5,  8(r12)
 	std	r6, 16(r12)

[PATCH 4/15] powerpc: Fix sldi to take literal not register name

From: Michael Neuling <hidden>
Date: 2012-06-08 11:36:05 

Was introduced by:
 commit 19ccb76a1938ab364a412253daec64613acbf3df
 Author: Paul Mackerras [off-list ref]
 Date:   Sat Jul 23 17:42:46 2011 +1000

Talking to paulus, this shouldn't be a literal.

Signed-off-by: Michael Neuling <redacted>
---

 arch/powerpc/kvm/book3s_hv_rmhandlers.S |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Index: clone3/arch/powerpc/kvm/book3s_hv_rmhandlers.S
===================================================================
--- clone3.orig/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ clone3/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -810,7 +810,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
 	lwz	r3,VCORE_NAPPING_THREADS(r5)
 	lwz	r4,VCPU_PTID(r9)
 	li	r0,1
-	sldi	r0,r0,r4
+	sld	r0,r0,r4
 	andc.	r3,r3,r0		/* no sense IPI'ing ourselves */
 	beq	43f
 	mulli	r4,r4,PACA_SIZE		/* get paca for thread 0 */

[PATCH 6/15] powerpc/pasemi: move lbz/stbciz to ppc-opcode.h

From: Michael Neuling <hidden>
Date: 2012-06-08 11:36:05 

move lbz/stbciz to ppc-opcode.h.

Signed-off-by: Michael Neuling <redacted>
---

 arch/powerpc/include/asm/ppc-opcode.h |    7 +++++++
 arch/powerpc/kernel/misc_64.S         |    5 -----
 2 files changed, 7 insertions(+), 5 deletions(-)

Index: clone3/arch/powerpc/include/asm/ppc-opcode.h
===================================================================
--- clone3.orig/arch/powerpc/include/asm/ppc-opcode.h
+++ clone3/arch/powerpc/include/asm/ppc-opcode.h
@@ -107,6 +107,8 @@
 #define PPC_INST_NEG			0x7c0000d0
 #define PPC_INST_BRANCH			0x48000000
 #define PPC_INST_BRANCH_COND		0x40800000
+#define PPC_INST_LBZCIX			0x7c0006aa
+#define PPC_INST_STBCIX			0x7c0007aa
 
 /* macros to insert fields into opcodes */
 #define __PPC_RA(a)	(((a) & 0x1f) << 16)
@@ -186,6 +188,11 @@
 					__PPC_RS(t) | __PPC_RA(a) | __PPC_RB(b))
 #define PPC_SLBFEE_DOT(t, b)	stringify_in_c(.long PPC_INST_SLBFEE | \
 					__PPC_RT(t) | __PPC_RB(b))
+/* PASemi instructions */
+#define LBZCIX(t,a,b)		stringify_in_c(.long PPC_INST_LBZCIX | \
+				       __PPC_RT(t) | __PPC_RA(a) | __PPC_RB(b))
+#define STBCIX(s,a,b)		stringify_in_c(.long PPC_INST_STBCIX | \
+				       __PPC_RS(s) | __PPC_RA(a) | __PPC_RB(b))
 
 /*
  * Define what the VSX XX1 form instructions will look like, then add
Index: clone3/arch/powerpc/kernel/misc_64.S
===================================================================
--- clone3.orig/arch/powerpc/kernel/misc_64.S
+++ clone3/arch/powerpc/kernel/misc_64.S
@@ -301,11 +301,6 @@ _GLOBAL(real_writeb)
 
 #ifdef CONFIG_PPC_PASEMI
 
-/* No support in all binutils for these yet, so use defines */
-#define LBZCIX(RT,RA,RB)  .long (0x7c0006aa|(RT<<21)|(RA<<16)|(RB << 11))
-#define STBCIX(RS,RA,RB)  .long (0x7c0007aa|(RS<<21)|(RA<<16)|(RB << 11))
-
-
 _GLOBAL(real_205_readb)
 	mfmsr	r7
 	ori	r0,r7,MSR_DR

[PATCH 5/15] powerpc: convert to %r for all GPR usage

From: Michael Neuling <hidden>
Date: 2012-06-08 11:36:05 

Now all the fixes are in place, let's rock-n-roll!

Signed-off-by: Michael Neuling <redacted>
---

 arch/powerpc/include/asm/ppc_asm.h |   72 ++++++++++++++++++++-----------------
 1 file changed, 39 insertions(+), 33 deletions(-)

Index: clone3/arch/powerpc/include/asm/ppc_asm.h
===================================================================
--- clone3.orig/arch/powerpc/include/asm/ppc_asm.h
+++ clone3/arch/powerpc/include/asm/ppc_asm.h
@@ -490,40 +490,46 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601)
 #define	cr7	7
 
 
-/* General Purpose Registers (GPRs) */
+/*
+ * General Purpose Registers (GPRs)
+ *
+ * The lower case r0-r31 should be used in preference to the upper
+ * case R0-R31 as they provide more error checking in the assembler.
+ * Use R0-31 only when really nessesary.
+ */
 
-#define	r0	0
-#define	r1	1
-#define	r2	2
-#define	r3	3
-#define	r4	4
-#define	r5	5
-#define	r6	6
-#define	r7	7
-#define	r8	8
-#define	r9	9
-#define	r10	10
-#define	r11	11
-#define	r12	12
-#define	r13	13
-#define	r14	14
-#define	r15	15
-#define	r16	16
-#define	r17	17
-#define	r18	18
-#define	r19	19
-#define	r20	20
-#define	r21	21
-#define	r22	22
-#define	r23	23
-#define	r24	24
-#define	r25	25
-#define	r26	26
-#define	r27	27
-#define	r28	28
-#define	r29	29
-#define	r30	30
-#define	r31	31
+#define	r0	%r0
+#define	r1	%r1
+#define	r2	%r2
+#define	r3	%r3
+#define	r4	%r4
+#define	r5	%r5
+#define	r6	%r6
+#define	r7	%r7
+#define	r8	%r8
+#define	r9	%r9
+#define	r10	%r10
+#define	r11	%r11
+#define	r12	%r12
+#define	r13	%r13
+#define	r14	%r14
+#define	r15	%r15
+#define	r16	%r16
+#define	r17	%r17
+#define	r18	%r18
+#define	r19	%r19
+#define	r20	%r20
+#define	r21	%r21
+#define	r22	%r22
+#define	r23	%r23
+#define	r24	%r24
+#define	r25	%r25
+#define	r26	%r26
+#define	r27	%r27
+#define	r28	%r28
+#define	r29	%r29
+#define	r30	%r30
+#define	r31	%r31
 
 #define	R0	0
 #define	R1	1

[PATCH 7/15] powerpc: merge STK_REG/PARAM/FRAMESIZE

From: Michael Neuling <hidden>
Date: 2012-06-08 11:36:05 

Merge the defines of STACKFRAMESIZE, STK_REG, STK_PARAM from different
places.  

Signed-off-by: Michael Neuling <redacted>
---

 arch/powerpc/include/asm/ppc_asm.h             |    5 +
 arch/powerpc/lib/checksum_64.S                 |    3 
 arch/powerpc/lib/copyuser_power7.S             |    3 
 arch/powerpc/mm/hash_low_64.S                  |   88 +++++++++++--------------
 arch/powerpc/platforms/cell/beat_hvCall.S      |   28 +++----
 arch/powerpc/platforms/powernv/opal-takeover.S |    2 
 arch/powerpc/platforms/pseries/hvCall.S        |   72 +++++++++-----------
 7 files changed, 93 insertions(+), 108 deletions(-)

Index: clone3/arch/powerpc/include/asm/ppc_asm.h
===================================================================
--- clone3.orig/arch/powerpc/include/asm/ppc_asm.h
+++ clone3/arch/powerpc/include/asm/ppc_asm.h
@@ -178,6 +178,11 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLP
 #define HMT_HIGH	or	3,3,3
 #define HMT_EXTRA_HIGH	or	7,7,7		# power7 only
 
+#define STACKFRAMESIZE 256
+#define STK_REG(i)     (112 + ((i)-14)*8)
+
+#define STK_PARAM(i)	(48 + ((i)-3)*8)
+
 #ifdef __KERNEL__
 #ifdef CONFIG_PPC64
 
Index: clone3/arch/powerpc/lib/checksum_64.S
===================================================================
--- clone3.orig/arch/powerpc/lib/checksum_64.S
+++ clone3/arch/powerpc/lib/checksum_64.S
@@ -65,9 +65,6 @@ _GLOBAL(csum_tcpudp_magic)
 	srwi	r3,r3,16
 	blr
 
-#define STACKFRAMESIZE 256
-#define STK_REG(i)	(112 + ((i)-14)*8)
-
 /*
  * Computes the checksum of a memory block at buff, length len,
  * and adds in "sum" (32-bit).
Index: clone3/arch/powerpc/lib/copyuser_power7.S
===================================================================
--- clone3.orig/arch/powerpc/lib/copyuser_power7.S
+++ clone3/arch/powerpc/lib/copyuser_power7.S
@@ -19,9 +19,6 @@
  */
 #include <asm/ppc_asm.h>
 
-#define STACKFRAMESIZE	256
-#define STK_REG(i)	(112 + ((i)-14)*8)
-
 	.macro err1
 100:
 	.section __ex_table,"a"
Index: clone3/arch/powerpc/mm/hash_low_64.S
===================================================================
--- clone3.orig/arch/powerpc/mm/hash_low_64.S
+++ clone3/arch/powerpc/mm/hash_low_64.S
@@ -34,14 +34,6 @@
  *         |   CR save area			(SP + 8)
  * SP ---> +-- Back chain			(SP + 0)
  */
-#define STACKFRAMESIZE	256
-
-/* Save parameters offsets */
-#define STK_PARM(i)	(STACKFRAMESIZE + 48 + ((i)-3)*8)
-
-/* Save non-volatile offsets */
-#define STK_REG(i)	(112 + ((i)-14)*8)
-
 
 #ifndef CONFIG_PPC_64K_PAGES
 
@@ -64,9 +56,9 @@ _GLOBAL(__hash_page_4K)
 	std	r0,16(r1)
 	stdu	r1,-STACKFRAMESIZE(r1)
 	/* Save all params that we need after a function call */
-	std	r6,STK_PARM(R6)(r1)
-	std	r8,STK_PARM(R8)(r1)
-	std	r9,STK_PARM(R9)(r1)
+	std	r6,STK_PARAM(R6)(r1)
+	std	r8,STK_PARAM(R8)(r1)
+	std	r9,STK_PARAM(R9)(r1)
 	
 	/* Save non-volatile registers.
 	 * r31 will hold "old PTE"
@@ -162,7 +154,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FT
 	/* At this point, r3 contains new PP bits, save them in
 	 * place of "access" in the param area (sic)
 	 */
-	std	r3,STK_PARM(R4)(r1)
+	std	r3,STK_PARAM(R4)(r1)
 
 	/* Get htab_hash_mask */
 	ld	r4,htab_hash_mask@got(2)
@@ -192,11 +184,11 @@ htab_insert_pte:
 	rldicr	r3,r0,3,63-3		/* r3 = (hash & mask) << 3 */
 
 	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARM(R4)(r1)	/* Retrieve new pp bits */
+	ld	r6,STK_PARAM(R4)(r1)	/* Retrieve new pp bits */
 	mr	r4,r29			/* Retrieve va */
 	li	r7,0			/* !bolted, !secondary */
 	li	r8,MMU_PAGE_4K		/* page size */
-	ld	r9,STK_PARM(R9)(r1)	/* segment size */
+	ld	r9,STK_PARAM(R9)(r1)	/* segment size */
 _GLOBAL(htab_call_hpte_insert1)
 	bl	.			/* Patched by htab_finish_init() */
 	cmpdi	0,r3,0
@@ -215,11 +207,11 @@ _GLOBAL(htab_call_hpte_insert1)
 	rldicr	r3,r0,3,63-3	/* r0 = (~hash & mask) << 3 */
 	
 	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARM(R4)(r1)	/* Retrieve new pp bits */
+	ld	r6,STK_PARAM(R4)(r1)	/* Retrieve new pp bits */
 	mr	r4,r29			/* Retrieve va */
 	li	r7,HPTE_V_SECONDARY	/* !bolted, secondary */
 	li	r8,MMU_PAGE_4K		/* page size */
-	ld	r9,STK_PARM(R9)(r1)	/* segment size */
+	ld	r9,STK_PARAM(R9)(r1)	/* segment size */
 _GLOBAL(htab_call_hpte_insert2)
 	bl	.			/* Patched by htab_finish_init() */
 	cmpdi	0,r3,0
@@ -255,7 +247,7 @@ htab_pte_insert_ok:
 	 * (maybe add eieio may be good still ?)
 	 */
 htab_write_out_pte:
-	ld	r6,STK_PARM(R6)(r1)
+	ld	r6,STK_PARAM(R6)(r1)
 	std	r30,0(r6)
 	li	r3, 0
 htab_bail:
@@ -288,8 +280,8 @@ htab_modify_pte:
 	/* Call ppc_md.hpte_updatepp */
 	mr	r5,r29			/* va */
 	li	r6,MMU_PAGE_4K		/* page size */
-	ld	r7,STK_PARM(R9)(r1)	/* segment size */
-	ld	r8,STK_PARM(R8)(r1)	/* get "local" param */
+	ld	r7,STK_PARAM(R9)(r1)	/* segment size */
+	ld	r8,STK_PARAM(R8)(r1)	/* get "local" param */
 _GLOBAL(htab_call_hpte_updatepp)
 	bl	.			/* Patched by htab_finish_init() */
 
@@ -312,7 +304,7 @@ htab_wrong_access:
 
 htab_pte_insert_failure:
 	/* Bail out restoring old PTE */
-	ld	r6,STK_PARM(R6)(r1)
+	ld	r6,STK_PARAM(R6)(r1)
 	std	r31,0(r6)
 	li	r3,-1
 	b	htab_bail
@@ -340,9 +332,9 @@ _GLOBAL(__hash_page_4K)
 	std	r0,16(r1)
 	stdu	r1,-STACKFRAMESIZE(r1)
 	/* Save all params that we need after a function call */
-	std	r6,STK_PARM(R6)(r1)
-	std	r8,STK_PARM(R8)(r1)
-	std	r9,STK_PARM(R9)(r1)
+	std	r6,STK_PARAM(R6)(r1)
+	std	r8,STK_PARAM(R8)(r1)
+	std	r9,STK_PARAM(R9)(r1)
 
 	/* Save non-volatile registers.
 	 * r31 will hold "old PTE"
@@ -452,7 +444,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FT
 	/* At this point, r3 contains new PP bits, save them in
 	 * place of "access" in the param area (sic)
 	 */
-	std	r3,STK_PARM(R4)(r1)
+	std	r3,STK_PARAM(R4)(r1)
 
 	/* Get htab_hash_mask */
 	ld	r4,htab_hash_mask@got(2)
@@ -473,7 +465,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FT
 	andis.	r0,r31,_PAGE_COMBO@h
 	beq	htab_inval_old_hpte
 
-	ld	r6,STK_PARM(R6)(r1)
+	ld	r6,STK_PARAM(R6)(r1)
 	ori	r26,r6,0x8000		/* Load the hidx mask */
 	ld	r26,0(r26)
 	addi	r5,r25,36		/* Check actual HPTE_SUB bit, this */
@@ -495,11 +487,11 @@ htab_special_pfn:
 	rldicr	r3,r0,3,63-3		/* r0 = (hash & mask) << 3 */
 
 	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARM(R4)(r1)	/* Retrieve new pp bits */
+	ld	r6,STK_PARAM(R4)(r1)	/* Retrieve new pp bits */
 	mr	r4,r29			/* Retrieve va */
 	li	r7,0			/* !bolted, !secondary */
 	li	r8,MMU_PAGE_4K		/* page size */
-	ld	r9,STK_PARM(R9)(r1)	/* segment size */
+	ld	r9,STK_PARAM(R9)(r1)	/* segment size */
 _GLOBAL(htab_call_hpte_insert1)
 	bl	.			/* patched by htab_finish_init() */
 	cmpdi	0,r3,0
@@ -522,11 +514,11 @@ _GLOBAL(htab_call_hpte_insert1)
 	rldicr	r3,r0,3,63-3		/* r0 = (~hash & mask) << 3 */
 
 	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARM(R4)(r1)	/* Retrieve new pp bits */
+	ld	r6,STK_PARAM(R4)(r1)	/* Retrieve new pp bits */
 	mr	r4,r29			/* Retrieve va */
 	li	r7,HPTE_V_SECONDARY	/* !bolted, secondary */
 	li	r8,MMU_PAGE_4K		/* page size */
-	ld	r9,STK_PARM(R9)(r1)	/* segment size */
+	ld	r9,STK_PARAM(R9)(r1)	/* segment size */
 _GLOBAL(htab_call_hpte_insert2)
 	bl	.			/* patched by htab_finish_init() */
 	cmpdi	0,r3,0
@@ -559,8 +551,8 @@ htab_inval_old_hpte:
 	mr	r4,r31			/* PTE.pte */
 	li	r5,0			/* PTE.hidx */
 	li	r6,MMU_PAGE_64K		/* psize */
-	ld	r7,STK_PARM(R9)(r1)	/* ssize */
-	ld	r8,STK_PARM(R8)(r1)	/* local */
+	ld	r7,STK_PARAM(R9)(r1)	/* ssize */
+	ld	r8,STK_PARAM(R8)(r1)	/* local */
 	bl	.flush_hash_page
 	/* Clear out _PAGE_HPTE_SUB bits in the new linux PTE */
 	lis	r0,_PAGE_HPTE_SUB@h
@@ -576,7 +568,7 @@ htab_pte_insert_ok:
 	/* Insert slot number & secondary bit in PTE second half,
 	 * clear _PAGE_BUSY and set approriate HPTE slot bit
 	 */
-	ld	r6,STK_PARM(R6)(r1)
+	ld	r6,STK_PARAM(R6)(r1)
 	li	r0,_PAGE_BUSY
 	andc	r30,r30,r0
 	/* HPTE SUB bit */
@@ -630,8 +622,8 @@ htab_modify_pte:
 	/* Call ppc_md.hpte_updatepp */
 	mr	r5,r29			/* va */
 	li	r6,MMU_PAGE_4K		/* page size */
-	ld	r7,STK_PARM(R9)(r1)	/* segment size */
-	ld	r8,STK_PARM(R8)(r1)	/* get "local" param */
+	ld	r7,STK_PARAM(R9)(r1)	/* segment size */
+	ld	r8,STK_PARAM(R8)(r1)	/* get "local" param */
 _GLOBAL(htab_call_hpte_updatepp)
 	bl	.			/* patched by htab_finish_init() */
 
@@ -644,7 +636,7 @@ _GLOBAL(htab_call_hpte_updatepp)
 	/* Clear the BUSY bit and Write out the PTE */
 	li	r0,_PAGE_BUSY
 	andc	r30,r30,r0
-	ld	r6,STK_PARM(R6)(r1)
+	ld	r6,STK_PARAM(R6)(r1)
 	std	r30,0(r6)
 	li	r3,0
 	b	htab_bail
@@ -657,7 +649,7 @@ htab_wrong_access:
 
 htab_pte_insert_failure:
 	/* Bail out restoring old PTE */
-	ld	r6,STK_PARM(R6)(r1)
+	ld	r6,STK_PARAM(R6)(r1)
 	std	r31,0(r6)
 	li	r3,-1
 	b	htab_bail
@@ -677,9 +669,9 @@ _GLOBAL(__hash_page_64K)
 	std	r0,16(r1)
 	stdu	r1,-STACKFRAMESIZE(r1)
 	/* Save all params that we need after a function call */
-	std	r6,STK_PARM(R6)(r1)
-	std	r8,STK_PARM(R8)(r1)
-	std	r9,STK_PARM(R9)(r1)
+	std	r6,STK_PARAM(R6)(r1)
+	std	r8,STK_PARAM(R8)(r1)
+	std	r9,STK_PARAM(R9)(r1)
 
 	/* Save non-volatile registers.
 	 * r31 will hold "old PTE"
@@ -780,7 +772,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FT
 	/* At this point, r3 contains new PP bits, save them in
 	 * place of "access" in the param area (sic)
 	 */
-	std	r3,STK_PARM(R4)(r1)
+	std	r3,STK_PARAM(R4)(r1)
 
 	/* Get htab_hash_mask */
 	ld	r4,htab_hash_mask@got(2)
@@ -813,11 +805,11 @@ ht64_insert_pte:
 	rldicr	r3,r0,3,63-3	/* r0 = (hash & mask) << 3 */
 
 	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARM(R4)(r1)	/* Retrieve new pp bits */
+	ld	r6,STK_PARAM(R4)(r1)	/* Retrieve new pp bits */
 	mr	r4,r29			/* Retrieve va */
 	li	r7,0			/* !bolted, !secondary */
 	li	r8,MMU_PAGE_64K
-	ld	r9,STK_PARM(R9)(r1)	/* segment size */
+	ld	r9,STK_PARAM(R9)(r1)	/* segment size */
 _GLOBAL(ht64_call_hpte_insert1)
 	bl	.			/* patched by htab_finish_init() */
 	cmpdi	0,r3,0
@@ -836,11 +828,11 @@ _GLOBAL(ht64_call_hpte_insert1)
 	rldicr	r3,r0,3,63-3	/* r0 = (~hash & mask) << 3 */
 
 	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARM(R4)(r1)	/* Retrieve new pp bits */
+	ld	r6,STK_PARAM(R4)(r1)	/* Retrieve new pp bits */
 	mr	r4,r29			/* Retrieve va */
 	li	r7,HPTE_V_SECONDARY	/* !bolted, secondary */
 	li	r8,MMU_PAGE_64K
-	ld	r9,STK_PARM(R9)(r1)	/* segment size */
+	ld	r9,STK_PARAM(R9)(r1)	/* segment size */
 _GLOBAL(ht64_call_hpte_insert2)
 	bl	.			/* patched by htab_finish_init() */
 	cmpdi	0,r3,0
@@ -876,7 +868,7 @@ ht64_pte_insert_ok:
 	 * (maybe add eieio may be good still ?)
 	 */
 ht64_write_out_pte:
-	ld	r6,STK_PARM(R6)(r1)
+	ld	r6,STK_PARAM(R6)(r1)
 	std	r30,0(r6)
 	li	r3, 0
 ht64_bail:
@@ -909,8 +901,8 @@ ht64_modify_pte:
 	/* Call ppc_md.hpte_updatepp */
 	mr	r5,r29			/* va */
 	li	r6,MMU_PAGE_64K
-	ld	r7,STK_PARM(R9)(r1)	/* segment size */
-	ld	r8,STK_PARM(R8)(r1)	/* get "local" param */
+	ld	r7,STK_PARAM(R9)(r1)	/* segment size */
+	ld	r8,STK_PARAM(R8)(r1)	/* get "local" param */
 _GLOBAL(ht64_call_hpte_updatepp)
 	bl	.			/* patched by htab_finish_init() */
 
@@ -933,7 +925,7 @@ ht64_wrong_access:
 
 ht64_pte_insert_failure:
 	/* Bail out restoring old PTE */
-	ld	r6,STK_PARM(R6)(r1)
+	ld	r6,STK_PARAM(R6)(r1)
 	std	r31,0(r6)
 	li	r3,-1
 	b	ht64_bail
Index: clone3/arch/powerpc/platforms/cell/beat_hvCall.S
===================================================================
--- clone3.orig/arch/powerpc/platforms/cell/beat_hvCall.S
+++ clone3/arch/powerpc/platforms/cell/beat_hvCall.S
@@ -22,8 +22,6 @@
 
 #include <asm/ppc_asm.h>
 
-#define	STK_PARM(i)	(48 + ((i)-3)*8)
-
 /* Not implemented on Beat, now */
 #define	HCALL_INST_PRECALL
 #define	HCALL_INST_POSTCALL
@@ -74,7 +72,7 @@ _GLOBAL(beat_hcall_norets8)
 	mr	r6,r7
 	mr	r7,r8
 	mr	r8,r9
-	ld	r10,STK_PARM(R10)(r1)
+	ld	r10,STK_PARAM(R10)(r1)
 
 	HVSC				/* invoke the hypervisor */
 
@@ -94,7 +92,7 @@ _GLOBAL(beat_hcall1)
 
 	HCALL_INST_PRECALL
 
-	std	r4,STK_PARM(R4)(r1)	/* save ret buffer */
+	std	r4,STK_PARAM(R4)(r1)	/* save ret buffer */
 
 	mr	r11,r3
 	mr	r3,r5
@@ -108,7 +106,7 @@ _GLOBAL(beat_hcall1)
 
 	HCALL_INST_POSTCALL
 
-	ld	r12,STK_PARM(R4)(r1)
+	ld	r12,STK_PARAM(R4)(r1)
 	std	r4,  0(r12)
 
 	lwz	r0,8(r1)
@@ -125,7 +123,7 @@ _GLOBAL(beat_hcall2)
 
 	HCALL_INST_PRECALL
 
-	std	r4,STK_PARM(R4)(r1)	/* save ret buffer */
+	std	r4,STK_PARAM(R4)(r1)	/* save ret buffer */
 
 	mr	r11,r3
 	mr	r3,r5
@@ -139,7 +137,7 @@ _GLOBAL(beat_hcall2)
 
 	HCALL_INST_POSTCALL
 
-	ld	r12,STK_PARM(R4)(r1)
+	ld	r12,STK_PARAM(R4)(r1)
 	std	r4,  0(r12)
 	std	r5,  8(r12)
 
@@ -157,7 +155,7 @@ _GLOBAL(beat_hcall3)
 
 	HCALL_INST_PRECALL
 
-	std	r4,STK_PARM(R4)(r1)	/* save ret buffer */
+	std	r4,STK_PARAM(R4)(r1)	/* save ret buffer */
 
 	mr	r11,r3
 	mr	r3,r5
@@ -171,7 +169,7 @@ _GLOBAL(beat_hcall3)
 
 	HCALL_INST_POSTCALL
 
-	ld	r12,STK_PARM(R4)(r1)
+	ld	r12,STK_PARAM(R4)(r1)
 	std	r4,  0(r12)
 	std	r5,  8(r12)
 	std	r6, 16(r12)
@@ -190,7 +188,7 @@ _GLOBAL(beat_hcall4)
 
 	HCALL_INST_PRECALL
 
-	std	r4,STK_PARM(R4)(r1)	/* save ret buffer */
+	std	r4,STK_PARAM(R4)(r1)	/* save ret buffer */
 
 	mr	r11,r3
 	mr	r3,r5
@@ -204,7 +202,7 @@ _GLOBAL(beat_hcall4)
 
 	HCALL_INST_POSTCALL
 
-	ld	r12,STK_PARM(R4)(r1)
+	ld	r12,STK_PARAM(R4)(r1)
 	std	r4,  0(r12)
 	std	r5,  8(r12)
 	std	r6, 16(r12)
@@ -224,7 +222,7 @@ _GLOBAL(beat_hcall5)
 
 	HCALL_INST_PRECALL
 
-	std	r4,STK_PARM(R4)(r1)	/* save ret buffer */
+	std	r4,STK_PARAM(R4)(r1)	/* save ret buffer */
 
 	mr	r11,r3
 	mr	r3,r5
@@ -238,7 +236,7 @@ _GLOBAL(beat_hcall5)
 
 	HCALL_INST_POSTCALL
 
-	ld	r12,STK_PARM(R4)(r1)
+	ld	r12,STK_PARAM(R4)(r1)
 	std	r4,  0(r12)
 	std	r5,  8(r12)
 	std	r6, 16(r12)
@@ -259,7 +257,7 @@ _GLOBAL(beat_hcall6)
 
 	HCALL_INST_PRECALL
 
-	std	r4,STK_PARM(R4)(r1)	/* save ret buffer */
+	std	r4,STK_PARAM(R4)(r1)	/* save ret buffer */
 
 	mr	r11,r3
 	mr	r3,r5
@@ -273,7 +271,7 @@ _GLOBAL(beat_hcall6)
 
 	HCALL_INST_POSTCALL
 
-	ld	r12,STK_PARM(R4)(r1)
+	ld	r12,STK_PARAM(R4)(r1)
 	std	r4,  0(r12)
 	std	r5,  8(r12)
 	std	r6, 16(r12)
Index: clone3/arch/powerpc/platforms/powernv/opal-takeover.S
===================================================================
--- clone3.orig/arch/powerpc/platforms/powernv/opal-takeover.S
+++ clone3/arch/powerpc/platforms/powernv/opal-takeover.S
@@ -14,8 +14,6 @@
 #include <asm/asm-offsets.h>
 #include <asm/opal.h>
 
-#define STK_PARAM(i)	(48 + ((i)-3)*8)
-
 #define H_HAL_TAKEOVER			0x5124
 #define H_HAL_TAKEOVER_QUERY_MAGIC	-1
 
Index: clone3/arch/powerpc/platforms/pseries/hvCall.S
===================================================================
--- clone3.orig/arch/powerpc/platforms/pseries/hvCall.S
+++ clone3/arch/powerpc/platforms/pseries/hvCall.S
@@ -13,8 +13,6 @@
 #include <asm/asm-offsets.h>
 #include <asm/ptrace.h>
 	
-#define STK_PARM(i)     (48 + ((i)-3)*8)
-
 #ifdef CONFIG_TRACEPOINTS
 
 	.section	".toc","aw"
@@ -26,7 +24,7 @@ hcall_tracepoint_refcount:
 	.section	".text"
 
 /*
- * precall must preserve all registers.  use unused STK_PARM()
+ * precall must preserve all registers.  use unused STK_PARAM()
  * areas to save snapshots and opcode. We branch around this
  * in early init (eg when populating the MMU hashtable) by using an
  * unconditional cpu feature.
@@ -40,28 +38,28 @@ END_FTR_SECTION(0, 1);						\
 	cmpdi	r12,0;						\
 	beq+	1f;						\
 	mflr	r0;						\
-	std	r3,STK_PARM(R3)(r1);				\
-	std	r4,STK_PARM(R4)(r1);				\
-	std	r5,STK_PARM(R5)(r1);				\
-	std	r6,STK_PARM(R6)(r1);				\
-	std	r7,STK_PARM(R7)(r1);				\
-	std	r8,STK_PARM(R8)(r1);				\
-	std	r9,STK_PARM(R9)(r1);				\
-	std	r10,STK_PARM(R10)(r1);				\
+	std	r3,STK_PARAM(R3)(r1);				\
+	std	r4,STK_PARAM(R4)(r1);				\
+	std	r5,STK_PARAM(R5)(r1);				\
+	std	r6,STK_PARAM(R6)(r1);				\
+	std	r7,STK_PARAM(R7)(r1);				\
+	std	r8,STK_PARAM(R8)(r1);				\
+	std	r9,STK_PARAM(R9)(r1);				\
+	std	r10,STK_PARAM(R10)(r1);				\
 	std	r0,16(r1);					\
-	addi	r4,r1,STK_PARM(FIRST_REG);			\
+	addi	r4,r1,STK_PARAM(FIRST_REG);			\
 	stdu	r1,-STACK_FRAME_OVERHEAD(r1);			\
 	bl	.__trace_hcall_entry;				\
 	addi	r1,r1,STACK_FRAME_OVERHEAD;			\
 	ld	r0,16(r1);					\
-	ld	r3,STK_PARM(R3)(r1);				\
-	ld	r4,STK_PARM(R4)(r1);				\
-	ld	r5,STK_PARM(R5)(r1);				\
-	ld	r6,STK_PARM(R6)(r1);				\
-	ld	r7,STK_PARM(R7)(r1);				\
-	ld	r8,STK_PARM(R8)(r1);				\
-	ld	r9,STK_PARM(R9)(r1);				\
-	ld	r10,STK_PARM(R10)(r1);				\
+	ld	r3,STK_PARAM(R3)(r1);				\
+	ld	r4,STK_PARAM(R4)(r1);				\
+	ld	r5,STK_PARAM(R5)(r1);				\
+	ld	r6,STK_PARAM(R6)(r1);				\
+	ld	r7,STK_PARAM(R7)(r1);				\
+	ld	r8,STK_PARAM(R8)(r1);				\
+	ld	r9,STK_PARAM(R9)(r1);				\
+	ld	r10,STK_PARAM(R10)(r1);				\
 	mtlr	r0;						\
 1:
 
@@ -79,8 +77,8 @@ END_FTR_SECTION(0, 1);						\
 	cmpdi	r12,0;						\
 	beq+	1f;						\
 	mflr	r0;						\
-	ld	r6,STK_PARM(R3)(r1);				\
-	std	r3,STK_PARM(R3)(r1);				\
+	ld	r6,STK_PARAM(R3)(r1);				\
+	std	r3,STK_PARAM(R3)(r1);				\
 	mr	r4,r3;						\
 	mr	r3,r6;						\
 	std	r0,16(r1);					\
@@ -88,7 +86,7 @@ END_FTR_SECTION(0, 1);						\
 	bl	.__trace_hcall_exit;				\
 	addi	r1,r1,STACK_FRAME_OVERHEAD;			\
 	ld	r0,16(r1);					\
-	ld	r3,STK_PARM(R3)(r1);				\
+	ld	r3,STK_PARAM(R3)(r1);				\
 	mtlr	r0;						\
 1:
 
@@ -132,7 +130,7 @@ _GLOBAL(plpar_hcall)
 
 	HCALL_INST_PRECALL(R5)
 
-	std     r4,STK_PARM(R4)(r1)     /* Save ret buffer */
+	std     r4,STK_PARAM(R4)(r1)     /* Save ret buffer */
 
 	mr	r4,r5
 	mr	r5,r6
@@ -143,7 +141,7 @@ _GLOBAL(plpar_hcall)
 
 	HVSC				/* invoke the hypervisor */
 
-	ld	r12,STK_PARM(R4)(r1)
+	ld	r12,STK_PARAM(R4)(r1)
 	std	r4,  0(r12)
 	std	r5,  8(r12)
 	std	r6, 16(r12)
@@ -168,7 +166,7 @@ _GLOBAL(plpar_hcall_raw)
 	mfcr	r0
 	stw	r0,8(r1)
 
-	std     r4,STK_PARM(R4)(r1)     /* Save ret buffer */
+	std     r4,STK_PARAM(R4)(r1)     /* Save ret buffer */
 
 	mr	r4,r5
 	mr	r5,r6
@@ -179,7 +177,7 @@ _GLOBAL(plpar_hcall_raw)
 
 	HVSC				/* invoke the hypervisor */
 
-	ld	r12,STK_PARM(R4)(r1)
+	ld	r12,STK_PARAM(R4)(r1)
 	std	r4,  0(r12)
 	std	r5,  8(r12)
 	std	r6, 16(r12)
@@ -198,7 +196,7 @@ _GLOBAL(plpar_hcall9)
 
 	HCALL_INST_PRECALL(R5)
 
-	std     r4,STK_PARM(R4)(r1)     /* Save ret buffer */
+	std     r4,STK_PARAM(R4)(r1)     /* Save ret buffer */
 
 	mr	r4,r5
 	mr	r5,r6
@@ -206,14 +204,14 @@ _GLOBAL(plpar_hcall9)
 	mr	r7,r8
 	mr	r8,r9
 	mr	r9,r10
-	ld	r10,STK_PARM(R11)(r1)	 /* put arg7 in R10 */
-	ld	r11,STK_PARM(R12)(r1)	 /* put arg8 in R11 */
-	ld	r12,STK_PARM(R13)(r1)    /* put arg9 in R12 */
+	ld	r10,STK_PARAM(R11)(r1)	 /* put arg7 in R10 */
+	ld	r11,STK_PARAM(R12)(r1)	 /* put arg8 in R11 */
+	ld	r12,STK_PARAM(R13)(r1)    /* put arg9 in R12 */
 
 	HVSC				/* invoke the hypervisor */
 
 	mr	r0,r12
-	ld	r12,STK_PARM(R4)(r1)
+	ld	r12,STK_PARAM(R4)(r1)
 	std	r4,  0(r12)
 	std	r5,  8(r12)
 	std	r6, 16(r12)
@@ -238,7 +236,7 @@ _GLOBAL(plpar_hcall9_raw)
 	mfcr	r0
 	stw	r0,8(r1)
 
-	std     r4,STK_PARM(R4)(r1)     /* Save ret buffer */
+	std     r4,STK_PARAM(R4)(r1)     /* Save ret buffer */
 
 	mr	r4,r5
 	mr	r5,r6
@@ -246,14 +244,14 @@ _GLOBAL(plpar_hcall9_raw)
 	mr	r7,r8
 	mr	r8,r9
 	mr	r9,r10
-	ld	r10,STK_PARM(R11)(r1)	 /* put arg7 in R10 */
-	ld	r11,STK_PARM(R12)(r1)	 /* put arg8 in R11 */
-	ld	r12,STK_PARM(R13)(r1)    /* put arg9 in R12 */
+	ld	r10,STK_PARAM(R11)(r1)	 /* put arg7 in R10 */
+	ld	r11,STK_PARAM(R12)(r1)	 /* put arg8 in R11 */
+	ld	r12,STK_PARAM(R13)(r1)    /* put arg9 in R12 */
 
 	HVSC				/* invoke the hypervisor */
 
 	mr	r0,r12
-	ld	r12,STK_PARM(R4)(r1)
+	ld	r12,STK_PARAM(R4)(r1)
 	std	r4,  0(r12)
 	std	r5,  8(r12)
 	std	r6, 16(r12)

[PATCH 8/15] powerpc: change mtcrf to use real register names

From: Michael Neuling <hidden>
Date: 2012-06-08 11:36:05 

mtocrf define is just a wrapper around the real instructions so we can
just use real register names here (ie. lower case).

Also remove braces in macro so this is possible.

Signed-off-by: Michael Neuling <redacted>
---

 arch/powerpc/include/asm/asm-compat.h |    2 +-
 arch/powerpc/include/asm/ppc_asm.h    |    4 ++--
 arch/powerpc/lib/copyuser_64.S        |    6 +++---
 arch/powerpc/lib/mem_64.S             |    6 +++---
 arch/powerpc/lib/memcpy_64.S          |    6 +++---
 5 files changed, 12 insertions(+), 12 deletions(-)

Index: clone3/arch/powerpc/include/asm/asm-compat.h
===================================================================
--- clone3.orig/arch/powerpc/include/asm/asm-compat.h
+++ clone3/arch/powerpc/include/asm/asm-compat.h
@@ -29,7 +29,7 @@
 #define PPC_LLARX(t, a, b, eh)	PPC_LDARX(t, a, b, eh)
 #define PPC_STLCX	stringify_in_c(stdcx.)
 #define PPC_CNTLZL	stringify_in_c(cntlzd)
-#define PPC_MTOCRF(FXM, RS) MTOCRF((FXM), (RS))
+#define PPC_MTOCRF(FXM, RS) MTOCRF((FXM), RS)
 #define PPC_LR_STKOFF	16
 #define PPC_MIN_STKFRM	112
 #else /* 32-bit */
Index: clone3/arch/powerpc/include/asm/ppc_asm.h
===================================================================
--- clone3.orig/arch/powerpc/include/asm/ppc_asm.h
+++ clone3/arch/powerpc/include/asm/ppc_asm.h
@@ -377,9 +377,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601)
 #ifdef CONFIG_PPC64
 #define MTOCRF(FXM, RS)			\
 	BEGIN_FTR_SECTION_NESTED(848);	\
-	mtcrf	(FXM), (RS);		\
+	mtcrf	(FXM), RS;		\
 	FTR_SECTION_ELSE_NESTED(848);	\
-	mtocrf (FXM), (RS);		\
+	mtocrf (FXM), RS;		\
 	ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_NOEXECUTE, 848)
 #endif
 
Index: clone3/arch/powerpc/lib/copyuser_64.S
===================================================================
--- clone3.orig/arch/powerpc/lib/copyuser_64.S
+++ clone3/arch/powerpc/lib/copyuser_64.S
@@ -30,7 +30,7 @@ _GLOBAL(__copy_tofrom_user_base)
 	dcbt	0,r4
 	beq	.Lcopy_page_4K
 	andi.	r6,r6,7
-	PPC_MTOCRF(0x01,R5)
+	PPC_MTOCRF(0x01,r5)
 	blt	cr1,.Lshort_copy
 /* Below we want to nop out the bne if we're on a CPU that has the
  * CPU_FTR_UNALIGNED_LD_STD bit set and the CPU_FTR_CP_USE_DCBTZ bit
@@ -186,7 +186,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_
 	blr
 
 .Ldst_unaligned:
-	PPC_MTOCRF(0x01,R6)		/* put #bytes to 8B bdry into cr7 */
+	PPC_MTOCRF(0x01,r6)		/* put #bytes to 8B bdry into cr7 */
 	subf	r5,r6,r5
 	li	r7,0
 	cmpldi	cr1,r5,16
@@ -201,7 +201,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_
 2:	bf	cr7*4+1,3f
 37:	lwzx	r0,r7,r4
 83:	stwx	r0,r7,r3
-3:	PPC_MTOCRF(0x01,R5)
+3:	PPC_MTOCRF(0x01,r5)
 	add	r4,r6,r4
 	add	r3,r6,r3
 	b	.Ldst_aligned
Index: clone3/arch/powerpc/lib/mem_64.S
===================================================================
--- clone3.orig/arch/powerpc/lib/mem_64.S
+++ clone3/arch/powerpc/lib/mem_64.S
@@ -19,7 +19,7 @@ _GLOBAL(memset)
 	rlwimi	r4,r4,16,0,15
 	cmplw	cr1,r5,r0		/* do we get that far? */
 	rldimi	r4,r4,32,0
-	PPC_MTOCRF(1,R0)
+	PPC_MTOCRF(1,r0)
 	mr	r6,r3
 	blt	cr1,8f
 	beq+	3f			/* if already 8-byte aligned */
@@ -49,7 +49,7 @@ _GLOBAL(memset)
 	bdnz	4b
 5:	srwi.	r0,r5,3
 	clrlwi	r5,r5,29
-	PPC_MTOCRF(1,R0)
+	PPC_MTOCRF(1,r0)
 	beq	8f
 	bf	29,6f
 	std	r4,0(r6)
@@ -65,7 +65,7 @@ _GLOBAL(memset)
 	std	r4,0(r6)
 	addi	r6,r6,8
 8:	cmpwi	r5,0
-	PPC_MTOCRF(1,R5)
+	PPC_MTOCRF(1,r5)
 	beqlr+
 	bf	29,9f
 	stw	r4,0(r6)
Index: clone3/arch/powerpc/lib/memcpy_64.S
===================================================================
--- clone3.orig/arch/powerpc/lib/memcpy_64.S
+++ clone3/arch/powerpc/lib/memcpy_64.S
@@ -12,7 +12,7 @@
 	.align	7
 _GLOBAL(memcpy)
 	std	r3,48(r1)	/* save destination pointer for return value */
-	PPC_MTOCRF(0x01,R5)
+	PPC_MTOCRF(0x01,r5)
 	cmpldi	cr1,r5,16
 	neg	r6,r3		# LS 3 bits = # bytes to 8-byte dest bdry
 	andi.	r6,r6,7
@@ -154,7 +154,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_
 	blr
 
 .Ldst_unaligned:
-	PPC_MTOCRF(0x01,R6)		# put #bytes to 8B bdry into cr7
+	PPC_MTOCRF(0x01,r6)		# put #bytes to 8B bdry into cr7
 	subf	r5,r6,r5
 	li	r7,0
 	cmpldi	cr1,r5,16
@@ -169,7 +169,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_
 2:	bf	cr7*4+1,3f
 	lwzx	r0,r7,r4
 	stwx	r0,r7,r3
-3:	PPC_MTOCRF(0x01,R5)
+3:	PPC_MTOCRF(0x01,r5)
 	add	r4,r6,r4
 	add	r3,r6,r3
 	b	.Ldst_aligned

[PATCH 10/15] powerpc: fixes for instructions not using correct register naming

From: Michael Neuling <hidden>
Date: 2012-06-08 11:36:05 

These macros are using integers where they could be using logical
names since they take registers.

We are going to enforce this soon, so fix these up now.

Signed-off-by: Michael Neuling <redacted>
---

 arch/powerpc/kernel/exceptions-64e.S |    8 ++++----
 arch/powerpc/kernel/misc_64.S        |    4 ++--
 arch/powerpc/lib/ldstfp.S            |    4 ++--
 arch/powerpc/mm/tlb_nohash_low.S     |   10 +++++-----
 4 files changed, 13 insertions(+), 13 deletions(-)

Index: clone3/arch/powerpc/kernel/exceptions-64e.S
===================================================================
--- clone3.orig/arch/powerpc/kernel/exceptions-64e.S
+++ clone3/arch/powerpc/kernel/exceptions-64e.S
@@ -903,7 +903,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	bne	1b				/* If not, repeat */
 
 	/* Invalidate all TLBs */
-	PPC_TLBILX_ALL(0,0)
+	PPC_TLBILX_ALL(R0,R0)
 	sync
 	isync
 
@@ -961,7 +961,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	tlbwe
 
 	/* Invalidate TLB1 */
-	PPC_TLBILX_ALL(0,0)
+	PPC_TLBILX_ALL(R0,R0)
 	sync
 	isync
 
@@ -1020,7 +1020,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	tlbwe
 
 	/* Invalidate TLB1 */
-	PPC_TLBILX_ALL(0,0)
+	PPC_TLBILX_ALL(R0,R0)
 	sync
 	isync
 
@@ -1138,7 +1138,7 @@ a2_tlbinit_after_iprot_flush:
 	tlbwe
 #endif /* CONFIG_PPC_EARLY_DEBUG_WSP */
 
-	PPC_TLBILX(0,0,0)
+	PPC_TLBILX(0,R0,R0)
 	sync
 	isync
 
Index: clone3/arch/powerpc/kernel/misc_64.S
===================================================================
--- clone3.orig/arch/powerpc/kernel/misc_64.S
+++ clone3/arch/powerpc/kernel/misc_64.S
@@ -309,7 +309,7 @@ _GLOBAL(real_205_readb)
 	mtmsrd	r0
 	sync
 	isync
-	LBZCIX(R3,0,R3)
+	LBZCIX(R3,R0,R3)
 	isync
 	mtmsrd	r7
 	sync
@@ -324,7 +324,7 @@ _GLOBAL(real_205_writeb)
 	mtmsrd	r0
 	sync
 	isync
-	STBCIX(R3,0,R4)
+	STBCIX(R3,R0,R4)
 	isync
 	mtmsrd	r7
 	sync
Index: clone3/arch/powerpc/lib/ldstfp.S
===================================================================
--- clone3.orig/arch/powerpc/lib/ldstfp.S
+++ clone3/arch/powerpc/lib/ldstfp.S
@@ -332,7 +332,7 @@ _GLOBAL(do_lxvd2x)
 	beq	cr7,1f
 	STXVD2X(0,R1,R8)
 1:	li	r9,-EFAULT
-2:	LXVD2X(0,0,R4)
+2:	LXVD2X(0,R0,R4)
 	li	r9,0
 3:	beq	cr7,4f
 	bl	put_vsr
@@ -361,7 +361,7 @@ _GLOBAL(do_stxvd2x)
 	STXVD2X(0,R1,R8)
 	bl	get_vsr
 1:	li	r9,-EFAULT
-2:	STXVD2X(0,0,R4)
+2:	STXVD2X(0,R0,R4)
 	li	r9,0
 3:	beq	cr7,4f
 	LXVD2X(0,R1,R8)
Index: clone3/arch/powerpc/mm/tlb_nohash_low.S
===================================================================
--- clone3.orig/arch/powerpc/mm/tlb_nohash_low.S
+++ clone3/arch/powerpc/mm/tlb_nohash_low.S
@@ -266,7 +266,7 @@ BEGIN_MMU_FTR_SECTION
 	andi.	r3,r3,MMUCSR0_TLBFI@l
 	bne	1b
 MMU_FTR_SECTION_ELSE
-	PPC_TLBILX_ALL(0,0)
+	PPC_TLBILX_ALL(R0,R0)
 ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
 	msync
 	isync
@@ -279,7 +279,7 @@ BEGIN_MMU_FTR_SECTION
 	wrteei	0
 	mfspr	r4,SPRN_MAS6	/* save MAS6 */
 	mtspr	SPRN_MAS6,r3
-	PPC_TLBILX_PID(0,0)
+	PPC_TLBILX_PID(R0,R0)
 	mtspr	SPRN_MAS6,r4	/* restore MAS6 */
 	wrtee	r10
 MMU_FTR_SECTION_ELSE
@@ -331,7 +331,7 @@ _GLOBAL(_tlbil_pid)
 	mfmsr	r10
 	wrteei	0
 	mtspr	SPRN_MAS6,r4
-	PPC_TLBILX_PID(0,0)
+	PPC_TLBILX_PID(R0,R0)
 	wrtee	r10
 	msync
 	isync
@@ -343,14 +343,14 @@ _GLOBAL(_tlbil_pid_noind)
 	ori	r4,r4,MAS6_SIND
 	wrteei	0
 	mtspr	SPRN_MAS6,r4
-	PPC_TLBILX_PID(0,0)
+	PPC_TLBILX_PID(R0,R0)
 	wrtee	r10
 	msync
 	isync
 	blr
 
 _GLOBAL(_tlbil_all)
-	PPC_TLBILX_ALL(0,0)
+	PPC_TLBILX_ALL(R0,R0)
 	msync
 	isync
 	blr

[PATCH 9/15] powerpc: change LOAD_REG_ADDR to use real register names

From: Michael Neuling <hidden>
Date: 2012-06-08 11:36:05 

LOAD_REG_ADDR define is just a wrapper around real instructions so we
can just use real register names here (ie. lower case).

Signed-off-by: Michael Neuling <redacted>
---

 arch/powerpc/platforms/powernv/opal-wrappers.S |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Index: clone3/arch/powerpc/platforms/powernv/opal-wrappers.S
===================================================================
--- clone3.orig/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ clone3/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -32,7 +32,7 @@
 	std	r12,PACASAVEDMSR(r13);	\
 	andc	r12,r12,r0;		\
 	mtmsrd	r12,1;			\
-	LOAD_REG_ADDR(R0,.opal_return);	\
+	LOAD_REG_ADDR(r0,.opal_return);	\
 	mtlr	r0;			\
 	li	r0,MSR_DR|MSR_IR;	\
 	andc	r12,r12,r0;		\

[PATCH 12/15] powerpc: introduce new ___PPC_RA/B/S/T macros

From: Michael Neuling <hidden>
Date: 2012-06-08 11:36:05 

These are currently the same as __PPC_RA/B/S/T but we'll wrap them
soon.

Signed-off-by: Michael Neuling <redacted>
---

 arch/powerpc/include/asm/ppc-opcode.h |    4 ++++
 1 file changed, 4 insertions(+)

Index: clone3/arch/powerpc/include/asm/ppc-opcode.h
===================================================================
--- clone3.orig/arch/powerpc/include/asm/ppc-opcode.h
+++ clone3/arch/powerpc/include/asm/ppc-opcode.h
@@ -111,6 +111,10 @@
 #define PPC_INST_STBCIX			0x7c0007aa
 
 /* macros to insert fields into opcodes */
+#define ___PPC_RA(a)	(((a) & 0x1f) << 16)
+#define ___PPC_RB(b)	(((b) & 0x1f) << 11)
+#define ___PPC_RS(s)	(((s) & 0x1f) << 21)
+#define ___PPC_RT(t)	___PPC_RS(t)
 #define __PPC_RA(a)	(((a) & 0x1f) << 16)
 #define __PPC_RB(b)	(((b) & 0x1f) << 11)
 #define __PPC_RS(s)	(((s) & 0x1f) << 21)

[PATCH 11/15] powerpc: fix VSX macros so register names aren't wrapped

From: Michael Neuling <hidden>
Date: 2012-06-08 11:36:05 

We need to do this so we can enforce the name of a and b in called
macros PPC_RA/B later.

Signed-off-by: Michael Neuling <redacted>
---

 arch/powerpc/include/asm/ppc-opcode.h |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Index: clone3/arch/powerpc/include/asm/ppc-opcode.h
===================================================================
--- clone3.orig/arch/powerpc/include/asm/ppc-opcode.h
+++ clone3/arch/powerpc/include/asm/ppc-opcode.h
@@ -201,11 +201,11 @@
 #define VSX_XX1(s, a, b)	(__PPC_XS(s) | __PPC_RA(a) | __PPC_RB(b))
 #define VSX_XX3(t, a, b)	(__PPC_XT(t) | __PPC_XA(a) | __PPC_XB(b))
 #define STXVD2X(s, a, b)	stringify_in_c(.long PPC_INST_STXVD2X | \
-					       VSX_XX1((s), (a), (b)))
+					       VSX_XX1((s), a, b))
 #define LXVD2X(s, a, b)		stringify_in_c(.long PPC_INST_LXVD2X | \
-					       VSX_XX1((s), (a), (b)))
+					       VSX_XX1((s), a, b))
 #define XXLOR(t, a, b)		stringify_in_c(.long PPC_INST_XXLOR | \
-					       VSX_XX3((t), (a), (b)))
+					       VSX_XX3((t), a, b))
 
 #define PPC_NAP			stringify_in_c(.long PPC_INST_NAP)
 #define PPC_SLEEP		stringify_in_c(.long PPC_INST_SLEEP)

[PATCH 13/15] powerpc: start using ___PPC_RA/B/S/T where necessary

From: Michael Neuling <hidden>
Date: 2012-06-08 11:36:05 

Now have ___PPC_RA/B/S/T we can use it in some places.  These are
places where we can't use the existing defines which will soon enforce
R0-R31 usage.  

The macros being changed here are being used in inline asm, which
can't convert to enforce the R0-R31 usage.

Signed-off-by: Michael Neuling <redacted>
---

 arch/powerpc/include/asm/ppc-opcode.h |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

Index: clone3/arch/powerpc/include/asm/ppc-opcode.h
===================================================================
--- clone3.orig/arch/powerpc/include/asm/ppc-opcode.h
+++ clone3/arch/powerpc/include/asm/ppc-opcode.h
@@ -147,13 +147,13 @@
 #define	PPC_DCBZL(a, b)		stringify_in_c(.long PPC_INST_DCBZL | \
 					__PPC_RA(a) | __PPC_RB(b))
 #define PPC_LDARX(t, a, b, eh)	stringify_in_c(.long PPC_INST_LDARX | \
-					__PPC_RT(t) | __PPC_RA(a) | \
-					__PPC_RB(b) | __PPC_EH(eh))
+					___PPC_RT(t) | ___PPC_RA(a) | \
+					___PPC_RB(b) | __PPC_EH(eh))
 #define PPC_LWARX(t, a, b, eh)	stringify_in_c(.long PPC_INST_LWARX | \
-					__PPC_RT(t) | __PPC_RA(a) | \
-					__PPC_RB(b) | __PPC_EH(eh))
+					___PPC_RT(t) | ___PPC_RA(a) | \
+					___PPC_RB(b) | __PPC_EH(eh))
 #define PPC_MSGSND(b)		stringify_in_c(.long PPC_INST_MSGSND | \
-					__PPC_RB(b))
+					___PPC_RB(b))
 #define PPC_POPCNTB(a, s)	stringify_in_c(.long PPC_INST_POPCNTB | \
 					__PPC_RA(a) | __PPC_RS(s))
 #define PPC_POPCNTD(a, s)	stringify_in_c(.long PPC_INST_POPCNTD | \
@@ -171,7 +171,7 @@
 #define PPC_WAIT(w)		stringify_in_c(.long PPC_INST_WAIT | \
 					__PPC_WC(w))
 #define PPC_TLBIE(lp,a) 	stringify_in_c(.long PPC_INST_TLBIE | \
-					       __PPC_RB(a) | __PPC_RS(lp))
+					       ___PPC_RB(a) | ___PPC_RS(lp))
 #define PPC_TLBSRX_DOT(a,b)	stringify_in_c(.long PPC_INST_TLBSRX_DOT | \
 					__PPC_RA(a) | __PPC_RB(b))
 #define PPC_TLBIVAX(a,b)	stringify_in_c(.long PPC_INST_TLBIVAX | \

[PATCH 14/15] powerpc: Introduce new __REG_R macros

From: Michael Neuling <hidden>
Date: 2012-06-08 11:36:05 

Signed-off-by: Michael Neuling <redacted>
---

 arch/powerpc/include/asm/ppc_asm.h |   32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

Index: clone3/arch/powerpc/include/asm/ppc_asm.h
===================================================================
--- clone3.orig/arch/powerpc/include/asm/ppc_asm.h
+++ clone3/arch/powerpc/include/asm/ppc_asm.h
@@ -569,6 +569,38 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601)
 #define	R30	30
 #define	R31	31
 
+#define	__REG_R0	0
+#define	__REG_R1	1
+#define	__REG_R2	2
+#define	__REG_R3	3
+#define	__REG_R4	4
+#define	__REG_R5	5
+#define	__REG_R6	6
+#define	__REG_R7	7
+#define	__REG_R8	8
+#define	__REG_R9	9
+#define	__REG_R10	10
+#define	__REG_R11	11
+#define	__REG_R12	12
+#define	__REG_R13	13
+#define	__REG_R14	14
+#define	__REG_R15	15
+#define	__REG_R16	16
+#define	__REG_R17	17
+#define	__REG_R18	18
+#define	__REG_R19	19
+#define	__REG_R20	20
+#define	__REG_R21	21
+#define	__REG_R22	22
+#define	__REG_R23	23
+#define	__REG_R24	24
+#define	__REG_R25	25
+#define	__REG_R26	26
+#define	__REG_R27	27
+#define	__REG_R28	28
+#define	__REG_R29	29
+#define	__REG_R30	30
+#define	__REG_R31	31
 
 /* Floating Point Registers (FPRs) */

[PATCH 15/15] powerpc: enforce usage of R0-R31 where possible

From: Michael Neuling <hidden>
Date: 2012-06-08 11:36:05 

Enforce the use of R0-R31 in macros where possible now we have all the
fixes in.

R0-R31 macros are removed here so that can't be used anymore.  They
should not be defined anywhere.

Signed-off-by: Michael Neuling <redacted>
---

 arch/powerpc/include/asm/ppc-opcode.h   |    8 ++---
 arch/powerpc/include/asm/ppc_asm.h      |   47 +++++---------------------------
 arch/powerpc/kernel/fpu.S               |   12 ++++----
 arch/powerpc/kvm/book3s_hv_rmhandlers.S |    3 +-
 4 files changed, 21 insertions(+), 49 deletions(-)

Index: clone3/arch/powerpc/include/asm/ppc-opcode.h
===================================================================
--- clone3.orig/arch/powerpc/include/asm/ppc-opcode.h
+++ clone3/arch/powerpc/include/asm/ppc-opcode.h
@@ -115,10 +115,10 @@
 #define ___PPC_RB(b)	(((b) & 0x1f) << 11)
 #define ___PPC_RS(s)	(((s) & 0x1f) << 21)
 #define ___PPC_RT(t)	___PPC_RS(t)
-#define __PPC_RA(a)	(((a) & 0x1f) << 16)
-#define __PPC_RB(b)	(((b) & 0x1f) << 11)
-#define __PPC_RS(s)	(((s) & 0x1f) << 21)
-#define __PPC_RT(s)	__PPC_RS(s)
+#define __PPC_RA(a)	___PPC_RA(__REG_##a)
+#define __PPC_RB(b)	___PPC_RB(__REG_##b)
+#define __PPC_RS(s)	___PPC_RS(__REG_##s)
+#define __PPC_RT(t)	___PPC_RT(__REG_##t)
 #define __PPC_XA(a)	((((a) & 0x1f) << 16) | (((a) & 0x20) >> 3))
 #define __PPC_XB(b)	((((b) & 0x1f) << 11) | (((b) & 0x20) >> 4))
 #define __PPC_XS(s)	((((s) & 0x1f) << 21) | (((s) & 0x20) >> 5))
Index: clone3/arch/powerpc/include/asm/ppc_asm.h
===================================================================
--- clone3.orig/arch/powerpc/include/asm/ppc_asm.h
+++ clone3/arch/powerpc/include/asm/ppc_asm.h
@@ -126,26 +126,26 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLP
 #define REST_32VRS(n,b,base)	REST_16VRS(n,b,base); REST_16VRS(n+16,b,base)
 
 /* Save the lower 32 VSRs in the thread VSR region */
-#define SAVE_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n));  STXVD2X(n,base,b)
+#define SAVE_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n));  STXVD2X(n,R##base,R##b)
 #define SAVE_2VSRS(n,b,base)	SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base)
 #define SAVE_4VSRS(n,b,base)	SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base)
 #define SAVE_8VSRS(n,b,base)	SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base)
 #define SAVE_16VSRS(n,b,base)	SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base)
 #define SAVE_32VSRS(n,b,base)	SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base)
-#define REST_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n)); LXVD2X(n,base,b)
+#define REST_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n)); LXVD2X(n,R##base,R##b)
 #define REST_2VSRS(n,b,base)	REST_VSR(n,b,base); REST_VSR(n+1,b,base)
 #define REST_4VSRS(n,b,base)	REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base)
 #define REST_8VSRS(n,b,base)	REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base)
 #define REST_16VSRS(n,b,base)	REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base)
 #define REST_32VSRS(n,b,base)	REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base)
 /* Save the upper 32 VSRs (32-63) in the thread VSX region (0-31) */
-#define SAVE_VSRU(n,b,base)	li b,THREAD_VR0+(16*(n));  STXVD2X(n+32,base,b)
+#define SAVE_VSRU(n,b,base)	li b,THREAD_VR0+(16*(n));  STXVD2X(n+32,R##base,R##b)
 #define SAVE_2VSRSU(n,b,base)	SAVE_VSRU(n,b,base); SAVE_VSRU(n+1,b,base)
 #define SAVE_4VSRSU(n,b,base)	SAVE_2VSRSU(n,b,base); SAVE_2VSRSU(n+2,b,base)
 #define SAVE_8VSRSU(n,b,base)	SAVE_4VSRSU(n,b,base); SAVE_4VSRSU(n+4,b,base)
 #define SAVE_16VSRSU(n,b,base)	SAVE_8VSRSU(n,b,base); SAVE_8VSRSU(n+8,b,base)
 #define SAVE_32VSRSU(n,b,base)	SAVE_16VSRSU(n,b,base); SAVE_16VSRSU(n+16,b,base)
-#define REST_VSRU(n,b,base)	li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,base,b)
+#define REST_VSRU(n,b,base)	li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,R##base,R##b)
 #define REST_2VSRSU(n,b,base)	REST_VSRU(n,b,base); REST_VSRU(n+1,b,base)
 #define REST_4VSRSU(n,b,base)	REST_2VSRSU(n,b,base); REST_2VSRSU(n+2,b,base)
 #define REST_8VSRSU(n,b,base)	REST_4VSRSU(n,b,base); REST_4VSRSU(n+4,b,base)
@@ -179,9 +179,11 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLP
 #define HMT_EXTRA_HIGH	or	7,7,7		# power7 only
 
 #define STACKFRAMESIZE 256
-#define STK_REG(i)     (112 + ((i)-14)*8)
+#define __STK_REG(i)   (112 + ((i)-14)*8)
+#define STK_REG(i)     __STK_REG(__REG_##i)
 
-#define STK_PARAM(i)	(48 + ((i)-3)*8)
+#define __STK_PARAM(i)	(48 + ((i)-3)*8)
+#define STK_PARAM(i)	__STK_PARAM(__REG_##i)
 
 #ifdef __KERNEL__
 #ifdef CONFIG_PPC64
@@ -536,39 +538,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601)
 #define	r30	%r30
 #define	r31	%r31
 
-#define	R0	0
-#define	R1	1
-#define	R2	2
-#define	R3	3
-#define	R4	4
-#define	R5	5
-#define	R6	6
-#define	R7	7
-#define	R8	8
-#define	R9	9
-#define	R10	10
-#define	R11	11
-#define	R12	12
-#define	R13	13
-#define	R14	14
-#define	R15	15
-#define	R16	16
-#define	R17	17
-#define	R18	18
-#define	R19	19
-#define	R20	20
-#define	R21	21
-#define	R22	22
-#define	R23	23
-#define	R24	24
-#define	R25	25
-#define	R26	26
-#define	R27	27
-#define	R28	28
-#define	R29	29
-#define	R30	30
-#define	R31	31
-
 #define	__REG_R0	0
 #define	__REG_R1	1
 #define	__REG_R2	2
Index: clone3/arch/powerpc/kernel/fpu.S
===================================================================
--- clone3.orig/arch/powerpc/kernel/fpu.S
+++ clone3/arch/powerpc/kernel/fpu.S
@@ -26,7 +26,7 @@
 #include <asm/ptrace.h>
 
 #ifdef CONFIG_VSX
-#define REST_32FPVSRS(n,c,base)						\
+#define __REST_32FPVSRS(n,c,base)					\
 BEGIN_FTR_SECTION							\
 	b	2f;							\
 END_FTR_SECTION_IFSET(CPU_FTR_VSX);					\
@@ -35,7 +35,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX);
 2:	REST_32VSRS(n,c,base);						\
 3:
 
-#define SAVE_32FPVSRS(n,c,base)						\
+#define __SAVE_32FPVSRS(n,c,base)					\
 BEGIN_FTR_SECTION							\
 	b	2f;							\
 END_FTR_SECTION_IFSET(CPU_FTR_VSX);					\
@@ -44,9 +44,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX);
 2:	SAVE_32VSRS(n,c,base);						\
 3:
 #else
-#define REST_32FPVSRS(n,b,base)	REST_32FPRS(n, base)
-#define SAVE_32FPVSRS(n,b,base)	SAVE_32FPRS(n, base)
+#define __REST_32FPVSRS(n,b,base)	REST_32FPRS(n, base)
+#define __SAVE_32FPVSRS(n,b,base)	SAVE_32FPRS(n, base)
 #endif
+#define REST_32FPVSRS(n,c,base) __REST_32FPVSRS(n,__REG_##c,__REG_##base)
+#define SAVE_32FPVSRS(n,c,base) __SAVE_32FPVSRS(n,__REG_##c,__REG_##base)
 
 /*
  * This task wants to use the FPU now.
@@ -79,7 +81,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 	beq	1f
 	toreal(r4)
 	addi	r4,r4,THREAD		/* want last_task_used_math->thread */
-	SAVE_32FPVSRS(0, r5, r4)
+	SAVE_32FPVSRS(0, R5, R4)
 	mffs	fr0
 	stfd	fr0,THREAD_FPSCR(r4)
 	PPC_LL	r5,PT_REGS(r4)
Index: clone3/arch/powerpc/kvm/book3s_hv_rmhandlers.S
===================================================================
--- clone3.orig/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ clone3/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -73,7 +73,8 @@ _GLOBAL(kvmppc_hv_entry_trampoline)
 	RFI
 
 #define ULONG_SIZE 		8
-#define VCPU_GPR(n)		(VCPU_GPRS + (n * ULONG_SIZE))
+#define __VCPU_GPR(n)		(VCPU_GPRS + (n * ULONG_SIZE))
+#define VCPU_GPR(n)		__VCPU_GPR(__REG_##n)
 
 /******************************************************************************
  *                                                                            *

Re: [PATCH 5/15] powerpc: convert to %r for all GPR usage

From: Jesse Larrew <hidden>
Date: 2012-06-08 21:55:03 

On 06/08/2012 06:36 AM, Michael Neuling wrote:
quoted hunk
-/* General Purpose Registers (GPRs) */
+/*
+ * General Purpose Registers (GPRs)
+ *
+ * The lower case r0-r31 should be used in preference to the upper
+ * case R0-R31 as they provide more error checking in the assembler.
+ * Use R0-31 only when really nessesary.
+ */

-#define	r0	0
-#define	r1	1
-#define	r2	2
-#define	r3	3
-#define	r4	4
-#define	r5	5
-#define	r6	6
-#define	r7	7
-#define	r8	8
-#define	r9	9
-#define	r10	10
-#define	r11	11
-#define	r12	12
-#define	r13	13
-#define	r14	14
-#define	r15	15
-#define	r16	16
-#define	r17	17
-#define	r18	18
-#define	r19	19
-#define	r20	20
-#define	r21	21
-#define	r22	22
-#define	r23	23
-#define	r24	24
-#define	r25	25
-#define	r26	26
-#define	r27	27
-#define	r28	28
-#define	r29	29
-#define	r30	30
-#define	r31	31
+#define	r0	%r0
+#define	r1	%r1
+#define	r2	%r2
+#define	r3	%r3
+#define	r4	%r4
+#define	r5	%r5
+#define	r6	%r6
+#define	r7	%r7
+#define	r8	%r8
+#define	r9	%r9
+#define	r10	%r10
+#define	r11	%r11
+#define	r12	%r12
+#define	r13	%r13
+#define	r14	%r14
+#define	r15	%r15
+#define	r16	%r16
+#define	r17	%r17
+#define	r18	%r18
+#define	r19	%r19
+#define	r20	%r20
+#define	r21	%r21
+#define	r22	%r22
+#define	r23	%r23
+#define	r24	%r24
+#define	r25	%r25
+#define	r26	%r26
+#define	r27	%r27
+#define	r28	%r28
+#define	r29	%r29
+#define	r30	%r30
+#define	r31	%r31

 #define	R0	0
 #define	R1	1

I think your patch was truncated somehow.

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev


Jesse Larrew
Software Engineer, Linux on Power Kernel Team
IBM Linux Technology Center
Phone: (512) 973-2052 (T/L: 363-2052)
jlarrew@linux.vnet.ibm.com

Re: [PATCH 5/15] powerpc: convert to %r for all GPR usage

From: Michael Neuling <hidden>
Date: 2012-06-14 03:25:29 

Jesse Larrew [off-list ref] wrote:
On 06/08/2012 06:36 AM, Michael Neuling wrote:
quoted
-/* General Purpose Registers (GPRs) */
+/*
+ * General Purpose Registers (GPRs)
+ *
+ * The lower case r0-r31 should be used in preference to the upper
+ * case R0-R31 as they provide more error checking in the assembler.
+ * Use R0-31 only when really nessesary.
+ */

-#define	r0	0
-#define	r1	1
-#define	r2	2
-#define	r3	3
-#define	r4	4
-#define	r5	5
-#define	r6	6
-#define	r7	7
-#define	r8	8
-#define	r9	9
-#define	r10	10
-#define	r11	11
-#define	r12	12
-#define	r13	13
-#define	r14	14
-#define	r15	15
-#define	r16	16
-#define	r17	17
-#define	r18	18
-#define	r19	19
-#define	r20	20
-#define	r21	21
-#define	r22	22
-#define	r23	23
-#define	r24	24
-#define	r25	25
-#define	r26	26
-#define	r27	27
-#define	r28	28
-#define	r29	29
-#define	r30	30
-#define	r31	31
+#define	r0	%r0
+#define	r1	%r1
+#define	r2	%r2
+#define	r3	%r3
+#define	r4	%r4
+#define	r5	%r5
+#define	r6	%r6
+#define	r7	%r7
+#define	r8	%r8
+#define	r9	%r9
+#define	r10	%r10
+#define	r11	%r11
+#define	r12	%r12
+#define	r13	%r13
+#define	r14	%r14
+#define	r15	%r15
+#define	r16	%r16
+#define	r17	%r17
+#define	r18	%r18
+#define	r19	%r19
+#define	r20	%r20
+#define	r21	%r21
+#define	r22	%r22
+#define	r23	%r23
+#define	r24	%r24
+#define	r25	%r25
+#define	r26	%r26
+#define	r27	%r27
+#define	r28	%r28
+#define	r29	%r29
+#define	r30	%r30
+#define	r31	%r31

 #define	R0	0
 #define	R1	1

I think your patch was truncated somehow.
How so?

Mikey

Re: [PATCH 5/15] powerpc: convert to %r for all GPR usage

From: Jesse Larrew <hidden>
Date: 2012-06-14 06:50:59 

On 06/13/2012 10:25 PM, Michael Neuling wrote:

Jesse Larrew [off-list ref] wrote:
quoted
On 06/08/2012 06:36 AM, Michael Neuling wrote:
quoted
-/* General Purpose Registers (GPRs) */
+/*
+ * General Purpose Registers (GPRs)
+ *
+ * The lower case r0-r31 should be used in preference to the upper
+ * case R0-R31 as they provide more error checking in the assembler.
+ * Use R0-31 only when really nessesary.
+ */
<snip>
quoted
quoted
 #define	R0	0
 #define	R1	1

I think your patch was truncated somehow.
How so?

Mikey

Oops. False alarm. I read the comment about the GPRs and expected to see #define statements for R2-31 as well. However, I just realized that your patch didn't actually add them. The R0 and R1 defines are just there for context. My mistake.

Jesse Larrew
Software Engineer, Linux on Power Kernel Team
IBM Linux Technology Center
Phone: (512) 973-2052 (T/L: 363-2052)
jlarrew@linux.vnet.ibm.com
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help