Re: [PATCH v5 4/5] fsl_pmc: Add API to enable device as wakeup event source

On 06/05/2012 11:49 AM, Li Yang-R58472 wrote:

quoted

-----Original Message-----
From: Wood Scott-B07421
Sent: Wednesday, June 06, 2012 12:12 AM
To: Li Yang-R58472
Cc: Wood Scott-B07421; Zhao Chenhui-B35336; linuxppc-dev@lists.ozlabs.org;
linux-kernel@vger.kernel.org; galak@kernel.crashing.org
Subject: Re: [PATCH v5 4/5] fsl_pmc: Add API to enable device as wakeup
event source

On 06/04/2012 11:08 PM, Li Yang-R58472 wrote:

quoted

quoted

-----Original Message-----
From: Wood Scott-B07421
Sent: Tuesday, June 05, 2012 7:03 AM
To: Zhao Chenhui-B35336
Cc: linuxppc-dev@lists.ozlabs.org; linux-kernel@vger.kernel.org;
galak@kernel.crashing.org; Li Yang-R58472
Subject: Re: [PATCH v5 4/5] fsl_pmc: Add API to enable device as
wakeup event source

On 06/04/2012 06:36 AM, Zhao Chenhui wrote:

quoted

On Fri, Jun 01, 2012 at 05:08:52PM -0500, Scott Wood wrote:

quoted

On 05/11/2012 06:53 AM, Zhao Chenhui wrote:

quoted

+int mpc85xx_pmc_set_wake(struct platform_device *pdev, bool
+enable)

Why does it have to be a platform_device?  Would a bare device_node

work

quoted

quoted

here?  If it's for stuff like device_may_wakeup() that could be in
a platform_device wrapper function.

It does not have to be a platform_device. I think it can be a struct

device.

Why does it even need that?  The low level mechanism for influencing
PMCDR should only need a device node, not a Linux device struct.

It does no harm to pass the device structure and makes more sense for

object oriented interface design.

It does do harm if you don't have a device structure to pass, if for some
reason you found the device by directly looking for it rather than going
through the device model.

Whether or not a device is a wakeup source not only depends on the
SoC specification but also the configuration and current state for
the device.  I only expect the device driver to have this knowledge
and call this function rather than some standalone platform code.
Therefore I don't think your concern matters.

First, I think it's bad API to force the passing of a higher level
object when a lower level object would suffice (and there are no
legitimate future-proofing or abstraction reasons for hiding the lower
level object).

But regardless, the entity you call a "device driver" may or may not use
the standard driver model (e.g. look at PCI root complexes), and your
assumption about what platform code knows may or may not be correct.  I
could just as well say that only platform code knows about the SoC
clock/power routing during a given low power state.

quoted

quoted

quoted

quoted

quoted

Who is setting can_wakeup for these devices?

The device driver is responsible to set can_wakeup.

How would the device driver know how to set it?  Wouldn't this depend
on the particular SoC and low power mode?

It is based on the "fsl,magic-packet" and "fsl,wake-on-filer" device

tree properties.

fsl,magic-packet was a mistake.  It is equivalent to checking the
compatible for etsec.  It does not convey any information about whether

It can be described either by explicit feature property or by the
compatible.  I don't think it is a problem that we choose one against
another.

I do think it's a problem, because it's unnecessarily complicated, and
more error prone (we probably didn't have fsl,magic-packet on all the
SoCs that support it before the .dtsi refactoring).  But my point was
that it says nothing about whether the eTSEC will still be functioning
during a low power state.

quoted

the eTSEC is still active in a given low power mode.

Whether or not the eTSEC is still active in both sleep and deep sleep
is only depending on if we set it to be a wakeup source.

Only because we happen to support eTSEC as a wakeup source on all SoCs.

If it behaves differently for low power modes in the future, we could
address that by adding additional property.

quoted

How is fsl,wake-os-filer relevant to this decision?  When will it be set
but not fsl,magic-packet?

I mean either fsl,magic-packet or fsl,wake-on-filer shows it can be a
wakeup source.  Currently we don't have an SoC to have wake-on-filer
while not wake-on-magic.  But I think it's better to consider both as
they are independent features.

You're not willing to consider an SoC where waking on eTSEC is
unsupported, but you're willing to consider an eTSEC that has
wake-on-filer but magic packet support has for some reason been dropped?

quoted

What about devices other than ethernet?  What about differences between
ordinary sleep and deep sleep?

There is no difference for sleep and deep sleep for all wakeup sources currently.

I recall being able to wake an mpc85xx chip (maybe mpc8544?) from
ordinary sleep using the DUART (even though the manual suggests that
only external interrupts can be used -- not even eTSEC).  You can't do
that in deep sleep.

You ignored "what about devices other than ethernet".

-Scott