RE: [linuxppc-release] [powerpc] boot up problem

Is this the patch you mentioned?
http://patchwork.ozlabs.org/patch/128806/

I applied this patch but the issue was still there.

-----Original Message-----
From: Tabi Timur-B04825=20
Sent: Friday, December 02, 2011 11:56 AM
To: Jia Hongtao-B38951
Cc: Kumar Gala; linuxppc-dev@lists.ozlabs.org; Li Yang-R58472; Fleming Andy=
-AFLEMING
Subject: Re: [linuxppc-release] [powerpc] boot up problem

Jia Hongtao-B38951 wrote:

Hi

I just found that the 'next' branch you mentioned have problem to boot up=

.

I test it in p1022ds and p1010rdb boards and the result are both the same=

.

Note that for p1022ds I use "make p1022ds.dtb" to make the dtb file(36bit=

) with 36bit-uboot.

And for p1010rdb I use all 32bit image.
The problem list below:

scsi0 : sata_fsl
ata1: SATA max UDMA/133 irq 74
fsl-sata fffe19000.sata: Sata FSL Platform/CSB Driver init
scsi1 : sata_fsl
ata2: SATA max UDMA/133 irq 41
Fixed MDIO Bus: probed
Unable to handle kernel paging request for data at address 0x00000000=20
Faulting instruction address: 0xc0451630
Oops: Kernel access of bad area, sig: 11 [#1]

Andy has phy driver patch that fixes this.

--
Timur Tabi
Linux kernel developer at Freescale