Re: [linuxppc-release] [powerpc] boot up problem

On Dec 1, 2011, at 9:55 PM, Tabi Timur-B04825 wrote:

Jia Hongtao-B38951 wrote:

quoted

Hi
=20
I just found that the 'next' branch you mentioned have problem to =

boot up.

quoted

I test it in p1022ds and p1010rdb boards and the result are both the =

same.

quoted

Note that for p1022ds I use "make p1022ds.dtb" to make the dtb =

file(36bit) with 36bit-uboot.

quoted

And for p1010rdb I use all 32bit image.
The problem list below:
=20
scsi0 : sata_fsl
ata1: SATA max UDMA/133 irq 74
fsl-sata fffe19000.sata: Sata FSL Platform/CSB Driver init
scsi1 : sata_fsl
ata2: SATA max UDMA/133 irq 41
Fixed MDIO Bus: probed
Unable to handle kernel paging request for data at address 0x00000000
Faulting instruction address: 0xc0451630
Oops: Kernel access of bad area, sig: 11 [#1]

=20
Andy has phy driver patch that fixes this.

Andy,

What's going on here?  Is there a fix in v3.2-rc4?

- k=