Re: FW: Ethernet driver WR linux

On 08/05/2011 12:31 AM, smitha.vanga@wipro.com wrote:

Hi
 
I have bringup WR linux 2.6.38 on a custom mpc8247 board. Not able to
configure the ipaddress.  When I boot my linux kernel I get the below
message.
Also I am using the fec 1.  The fec is not getting initialized. 
fs_enet.c:v1.0 (Aug 8, 2005)
BB MII Bus: Cannot register as MDIO bus
fsl-bb-mdio: probe of fsl-bb-mdio.0 failed with error -1
BB MII Bus: Cannot register as MDIO bus
fsl-bb-mdio: probe of fsl-bb-mdio.1 failed with error -1
I have enabled the following:
 

CONFIG_NET_ETHERNET=y

CONFIG_MII=y

CONFIG_FS_ENET=y

# CONFIG_FS_ENET_HAS_SCC is not set

CONFIG_FS_ENET_HAS_FCC=y

Can you attach your device tree?  What sort of mdio do you have on your
board?

*Please do not print this email unless it is absolutely necessary. *

The information contained in this electronic message and any attachments
to this message are intended for the exclusive use of the addressee(s)
and may contain proprietary, confidential or privileged information. If
you are not the intended recipient, you should not disseminate,
distribute or copy this e-mail. Please notify the sender immediately and
destroy all copies of this message and any attachments.

WARNING: Computer viruses can be transmitted via email. The recipient
should check this email and any attachments for the presence of viruses.
The company accepts no liability for any damage caused by any virus
transmitted by this email.

www.wipro.com

Is there any way you can turn this crud off?

-Scott