Re: Relocatable kernel for ppc44x

On Wed, Jun 15, 2011 at 11:30 AM, David Laight [off-list ref]wrote:

quoted

The PPC440X currently uses 256M TLB entries to pin the
lowmem. When we go for a relocatable kernel we have to :

1) Restrict the kernel load address to be 256M aligned

OR

2) Use 16M TLB(the next possible TLB page size supported)
entries till the first
256M and then use the 256M TLB entries for the rest of lowmem.

What is wrong with:

3) Use 256M TLB entries with the lowest one including
  addresses below the kernel base.

Clearly the kernel shouldn't be accessing the addresses
below its base address - but that is true of a lot of
address space mapped into the kernel.

It gets mucky since we will then need need to assess how much of that 256M
mapping will be above the kernel base, determine if that is sufficient to
boot the kernel, if not then setup additional 16MB mappings and so on.  It
might be cleaner to just use multiple 16MB mappings directly?

By the way we have some patches to support a non-zero (but fixed) boot
address for PPC440.  They are against 2.6.31, it's pretty simple stuff
except also requires changes in the simpleboot wrapper.  We will post them
shortly since they are relevant to this discussion.

John
-- 
John Williams, PhD, B. Eng, B. IT
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com  p: +61-7-30090663  f: +61-7-30090663