On Sun, Mar 1, 2009 at 9:48 AM, Grant Likely [off-list ref] wr=
ote:

On Sun, Mar 1, 2009 at 3:18 AM, Wolfram Sang [off-list ref] wrot=

e:

quoted

Hi Grant,

thanks for the review!

On Thu, Feb 26, 2009 at 10:31:24PM -0700, Grant Likely wrote:

quoted

Thanks for the patch Wolfram. =A0Comments below.

On Wed, Feb 25, 2009 at 8:32 AM, Wolfram Sang [off-list ref] w=

rote:

quoted

quoted

quoted

Signed-off-by: Wolfram Sang <redacted>
---
=A0arch/powerpc/boot/dts/pcm032.dts =A0 =A0 =A0 =A0 =A0 =A0 | =A0391 =

+++++++

quoted

quoted

quoted

=A0arch/powerpc/configs/52xx/pcm032_defconfig =A0 | 1394 ++++++++++++=

++++++++++++++

quoted

quoted

Do you really need a separate defconfig for this board? =A0Can it be
merged with an existing defconfig?

Will have a look if I can make a pcm03x_defconfig out of pcm030_defconfi=

g.

Cool, thanks.

quoted

quoted

motionpro.dts is a good example of what it should look like.

Ah, thanks for the pointer. Will have a look there. Guess I'll need to u=

pdate

quoted

pcm030.dts later, too (from which I copied this one). Will rewrite the
localbus-node addressing the comments you gave.

pcm030.dts in mainline doesn't have a localbus node.

I've been using this on my pcm030 locally.

pcm030 doesn't have a PCI socket but it can be added via the expansion bus.
With just the basic pcm030 hardware, if I uncomment the pci node I
sometimes hang on boot.

	lpb@ff000000 {
		compatible =3D "fsl,lpb", "simple-bus";
		#address-cells =3D <2>;
		#size-cells =3D <1>;
		ranges =3D <0 0 0xff000000 0x01000000>;

		flash@0 {
			compatible =3D "cfi-flash";
			reg =3D <0 0 0x01000000>;
			bank-width =3D <2>;
			device-width =3D <2>;
			#size-cells =3D <1>;
			#address-cells =3D <1>;
			partition@0 {
				label =3D "ubootl";
				reg =3D <0x00000000 0x00040000>;
			};
			partition@40000 {
				label =3D "kernel";
				reg =3D <0x00040000 0x001c0000>;
			};
			partition@200000 {
				label =3D "jffs2";
				reg =3D <0x00200000 0x00D00000>;
			};
			partition@f00000 {
				label =3D "uboot";
				reg =3D <0x00f00000 0x00040000>;
			};
			partition@f40000 {
				label =3D "oftree";
				reg =3D <0x00f40000 0x00040000>;
			};
			partition@f80000 {
				label =3D "space";
				reg =3D <0x00f80000 0x00080000>;
			};
		};
	};
	/*
	pci@f0000d00 {
		#interrupt-cells =3D <1>;
		#size-cells =3D <2>;
		#address-cells =3D <3>;
		device_type =3D "pci";
		compatible =3D "fsl,mpc5200b-pci","fsl,mpc5200-pci";
		reg =3D <0xf0000d00 0x100>;
		interrupt-map-mask =3D <0xf800 0x0 0x0 0x7>;
		interrupt-map =3D <0xc000 0x0 0x0 0x1 &mpc5200_pic 0x0 0x0 0x3 / 1st slot=
 /
				 0xc000 0x0 0x0 0x2 &mpc5200_pic 0x1 0x1 0x3
				 0xc000 0x0 0x0 0x3 &mpc5200_pic 0x1 0x2 0x3
				 0xc000 0x0 0x0 0x4 &mpc5200_pic 0x1 0x3 0x3

				 0xc800 0x0 0x0 0x1 &mpc5200_pic 0x1 0x1 0x3 / 2nd slot /
				 0xc800 0x0 0x0 0x2 &mpc5200_pic 0x1 0x2 0x3
				 0xc800 0x0 0x0 0x3 &mpc5200_pic 0x1 0x3 0x3
				 0xc800 0x0 0x0 0x4 &mpc5200_pic 0x0 0x0 0x3>;
		clock-frequency =3D <0>; // From boot loader
		interrupts =3D <0x2 0x8 0x0 0x2 0x9 0x0 0x2 0xa 0x0>;
		interrupt-parent =3D <&mpc5200_pic>;
		bus-range =3D <0 0>;
		ranges =3D <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000
			  0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
			  0x01000000 0x0 0x00000000 0xb0000000 0x0 0x01000000>;
	};
*/

g.

--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev

--=20
Jon Smirl
jonsmirl@gmail.com