Benjamin Herrenschmidt wrote:

On Fri, 2007-06-15 at 14:20 -0700, Mark A. Greer wrote:
 

quoted

On Fri, Jun 15, 2007 at 10:14:24AM +0200, Segher Boessenkool wrote:

   

quoted

quoted

I've double checked this. All processors considered 7450 in the kernel 
are covered by MPC7450 RISC Microprocessor Family Reference Manual 
where hardware cache flushing procedure is described.
       

Nice.  Now all that remains to be done is for the patch to
be tested on actual hardware for at least a few of those
other CPUs.  Any volunteers?
     

I just booted & played around on a prpmc2800e (7447A, 512MB) with
this patch and it seemed to work fine.

I *may* have some old sandpoint 745x modules that still work but
I'll have to get the sandpoint working in arch/powerpc again.
I'll try to get to that in a week or so.
   

The thing that needs torture is the powerbook sleep/wakeup code. That's
where all the cache flushing issues have been biting in the past.

Ben.
 

Note that 745x processors have L3 cache installed and may have the same 
problem requiring similar code modifications to use L3 hardware flushing 
mechanism.
So, my patch may not cure the cache flushing problem at all on such 
processors.

Vlad.

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev