[PATCH] Make i2c-mpc driver use i2c_add_numbered_adapter

Move the i2c-mpc driver over to using the new i2c infrastructure.
Specifically, it now uses i2c_add_numberd_adapter so that the bus number
can be determined ahead of time and used to register i2c clients before
the bus is instantiated.

Tested on an MPC5200 based board

Signed-off-by: Grant Likely <redacted>
---
This patch will need to be tested to make sure it does not break any 8xxx
board ports.

Work still to be done (in another patch): support for pulling i2c client
registrations out of the device tree.

 drivers/i2c/busses/i2c-mpc.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index c6b6898..a769efc 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c

@@ -327,9 +327,10 @@ static int fsl_i2c_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, i2c);
 
 	i2c->adap = mpc_ops;
+	i2c->adap.nr = pdev->id;
 	i2c_set_adapdata(&i2c->adap, i2c);
 	i2c->adap.dev.parent = &pdev->dev;
-	if ((result = i2c_add_adapter(&i2c->adap)) < 0) {
+	if ((result = i2c_add_numbered_adapter(&i2c->adap)) < 0) {
 		printk(KERN_ERR "i2c-mpc - failed to add adapter\n");
 		goto fail_add;
 	}