Re: [PATCH 2/3] ath11k: change return buffer manager for QCA6390
From: Kalle Valo <hidden>
Date: 2021-09-16 10:02:22
Also in:
ath11k
Jouni Malinen [off-list ref] writes:
From: Baochen Qiang <redacted> QCA6390 firmware uses HAL_RX_BUF_RBM_SW1_BM, not HAL_RX_BUF_RBM_SW3_BM. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Baochen Qiang <redacted> Signed-off-by: Jouni Malinen <redacted>
There were checkpatch warnings, I fixex them in the pending branch: drivers/net/wireless/ath/ath11k/dp.c:825: line length of 97 exceeds 90 columns drivers/net/wireless/ath/ath11k/hal_rx.c:375: line length of 95 exceeds 90 columns drivers/net/wireless/ath/ath11k/dp_rx.c:3073: line length of 94 exceeds 90 columns drivers/net/wireless/ath/ath11k/dp_rx.c:3083: line length of 94 exceeds 90 columns drivers/net/wireless/ath/ath11k/dp_rx.c:3472: line length of 100 exceeds 90 columns drivers/net/wireless/ath/ath11k/dp_rx.c:5104: line length of 93 exceeds 90 columns drivers/net/wireless/ath/ath11k/dp_rx.c:5109: line length of 93 exceeds 90 columns -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches