Re: [PATCH] brcmfmac: Set SDIO workqueue as WQ_HIGHPRI

On August 2, 2021 7:11:12 PM Sean Anderson [off-list ref] wrote:

This puts tasks submitted to the SDIO workqueue at the head of the queue
and runs them immediately. This gets higher RX throughput with the SDIO
bus.

This was originally submitted as [1]. The original author Wright Feng
reports

quoted

throughput result with 43455(11ac) on 1 core 1.6 Ghz platform is
Without WQ_HIGGPRI TX/RX: 293/301 (mbps)
With    WQ_HIGHPRI TX/RX: 293/321 (mbps)

I tested this with a 43364(11bgn) on a 1 core 800 MHz platform and got
   Without WQ_HIGHPRI TX/RX: 16/19 (Mbits/sec)
   With    WQ_HIGHPRI TX/RX: 24/20 (MBits/sec)

[1] 
https://lore.kernel.org/linux-wireless/1584604406-15452-4-git-send-email-wright.feng@cypress.com/ (local)

Not sure if Wright Feng needs to be attributed as you clearly had a good 
look at his patch and the discussion related to it. You can add my ...

Reviewed-by: Arend van Spriel <redacted>

Signed-off-by: Sean Anderson <redacted>
---

drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)