Thread (7 messages) 7 messages, 1 author, 2021-06-06
STALE1850d
Revisions (3)
  1. v1 [diff vs current]
  2. v2 current
  3. v3 [diff vs current]

[PATCH v2 4/6] staging: mt7621-dts: move some properties into root port child nodes

From: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Date: 2021-06-06 16:14:06
Subsystem: staging subsystem, the rest · Maintainers: Greg Kroah-Hartman, Linus Torvalds

After a review of the bindings 'clocks', 'resets' and 'phys' must
be moved into root port child nodes. Hence, move all of them.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
 drivers/staging/mt7621-dts/mt7621.dtsi | 21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)
diff --git a/drivers/staging/mt7621-dts/mt7621.dtsi b/drivers/staging/mt7621-dts/mt7621.dtsi
index 840ba0c3ffed..ecfe2f2cf75a 100644
--- a/drivers/staging/mt7621-dts/mt7621.dtsi
+++ b/drivers/staging/mt7621-dts/mt7621.dtsi
@@ -500,15 +500,6 @@ pcie: pcie@1e140000 {
 
 		status = "disabled";
 
-		resets = <&rstctrl 24>, <&rstctrl 25>, <&rstctrl 26>;
-		reset-names = "pcie0", "pcie1", "pcie2";
-		clocks = <&sysc MT7621_CLK_PCIE0>,
-			 <&sysc MT7621_CLK_PCIE1>,
-			 <&sysc MT7621_CLK_PCIE2>;
-		clock-names = "pcie0", "pcie1", "pcie2";
-		phys = <&pcie0_phy 1>, <&pcie2_phy 0>;
-		phy-names = "pcie-phy0", "pcie-phy2";
-
 		reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
 
 		pcie@0,0 {
@@ -519,6 +510,10 @@ pcie@0,0 {
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0>;
 			interrupt-map = <0 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rstctrl 24>;
+			clocks = <&sysc MT7621_CLK_PCIE0>;
+			phys = <&pcie0_phy 1>;
+			phy-names = "pcie-phy0";
 			ranges;
 		};
 
@@ -530,6 +525,10 @@ pcie@1,0 {
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0>;
 			interrupt-map = <0 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rstctrl 25>;
+			clocks = <&sysc MT7621_CLK_PCIE1>;
+			phys = <&pcie0_phy 1>;
+			phy-names = "pcie-phy1";
 			ranges;
 		};
 
@@ -541,6 +540,10 @@ pcie@2,0 {
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0>;
 			interrupt-map = <0 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rstctrl 26>;
+			clocks = <&sysc MT7621_CLK_PCIE2>;
+			phys = <&pcie2_phy 0>;
+			phy-names = "pcie-phy2";
 			ranges;
 		};
 	};
-- 
2.25.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help