Re: Help with two momentarily failed drives out of a 4x3TB Raid 5

On Mon, Mar 11, 2013 at 10:41 AM, Roy Sigurd Karlsbakk
[off-list ref] wrote:

quoted

quoted

As above. Also, I see no self-tests logged?

I hadn't done any test manually but I had smartd running and
configured.

smartd won't run any tests unless you configure it to do so.

I completely forgot to check the surfaces when I bought the disks. I
did quite a few tests before I decided to use ext4 but did not check
their health.

I have two disks still missing 30% of the long test but the two other
ones stopped due to errors:

http://bpaste.net/raw/83003/
197 Current_Pending_Sector  0x0032   200   200   000    Old_age
Always       -       18

http://bpaste.net/raw/83004/
197 Current_Pending_Sector  0x0032   200   200   000    Old_age
Always       -       1


I am gonna pass badblocks on them but this does not look good.

Could a faulty sata data cable cause those bad blocks? The disks are 8
months old so I hope I can get them replaced.



-- 
Javier Marcet [off-list ref]