On Mon, Mar 11, 2013 at 9:40 AM, Mathias Burén [off-list ref] wrote:

quoted

quoted

quoted

quoted

I have 4.5 TB used and right now I have the filesystem mounted and I
can use it yet the kernel is spiting that same trace over and over
again. I really don't know what would be the best thing to do right
now and would appreciate any help.

So how are the drivers doing? smartctl -a for all HDDs please.

http://bpaste.net/raw/82828/

As far as I can see there are only two read errors reported on
/dev/sdb, nothing on the rest.

Also, I finally put the raid completely offline since the data was not
really readable in that state.



--
Javier Marcet [off-list ref]

Serial Number:    WD-WCAWZ2190021
197 Current_Pending_Sector  0x0032   200   200   000    Old_age
Always       -       3

Not good. I'd run smartctl -t long, wait for completion, check
results, then run badblocks.

By 18:00 today I should have the smartctl results.

Serial Number:    WD-WCAWZ2200949
197 Current_Pending_Sector  0x0032   200   200   000    Old_age
Always       -       1

As above. Also, I see no self-tests logged?

I hadn't done any test manually but I had smartd running and configured.


-- 
Javier Marcet [off-list ref]
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html