On 11 March 2013 00:41, Javier Marcet [off-list ref] wrote:

On Mon, Mar 11, 2013 at 1:33 AM, Javier Marcet [off-list ref] wrote:

quoted

quoted

quoted

I have 4.5 TB used and right now I have the filesystem mounted and I
can use it yet the kernel is spiting that same trace over and over
again. I really don't know what would be the best thing to do right
now and would appreciate any help.

So how are the drivers doing? smartctl -a for all HDDs please.

http://bpaste.net/raw/82828/

As far as I can see there are only two read errors reported on
/dev/sdb, nothing on the rest.

Also, I finally put the raid completely offline since the data was not
really readable in that state.



--
Javier Marcet [off-list ref]

Serial Number:    WD-WCAWZ2190021
197 Current_Pending_Sector  0x0032   200   200   000    Old_age
Always       -       3

Not good. I'd run smartctl -t long, wait for completion, check
results, then run badblocks.

Serial Number:    WD-WCAWZ2200949
197 Current_Pending_Sector  0x0032   200   200   000    Old_age
Always       -       1

As above. Also, I see no self-tests logged?

Cheers,
Mathias