November 2009

572 messages across 164 threads. The 100 most recently active threads.

LastThreadReplies
Monday 30 November
cluster maintenance for dummies
Brandon Ellis
none
[patch 1/1][mdadm] Fix needed to enable RAID device creation on SAS devices.
Wojcik, Artur
4
[PATCH v2] ppc440spe-adma: adds updated ppc440spe adma driver
Anatolij Gustschin
3
md: oops on dropping bitmaps from an array
Arkadiusz Miskiewicz
none
/etc/cron.weekly/99-raid-check
Farkas Levente
none
Re: Reed Solomon coding based Raid?
Goswin von Brederlow
none
Question for Neil/Superblocks
Justin Piszcz
3
Sunday 29 November
Reed Solomon coding based Raid?
John Hendrikx
4
Friday 27 November
Hello
aaa bbb
none
Help on first dangerous scrub / suggestions
Asdo
11
md-mod.start_dirty_degraded=1 can't work in boot command parameters
hank peng
1
Thursday 26 November
Re: grow raid 6: different errors with mdadm 3.0.3 and 3.1
Andrew Burgess
none
RAID5 Disk access question
Michael Guntsche
none
RE: RAID 5 rebuild fails with power interruption.
unknown sender
none
Interesting double failure
Tamas Vincze
1
Re: RAID 5 rebuild fails with power interruption.
Neil Brown
3
grow raid 6: different errors with mdadm 3.0.3 and 3.1
Andrew Burgess
1
check error notifications
Wil Reichert
none
Wednesday 25 November
Odd raid5 reshape behaviour
Goswin von Brederlow
none
Recovery didn't continue recovery after reboot
hank peng
1
mdstat E status and RAID5 recovery with mdadm
Brian Murphy
none
Tuesday 24 November
Now [...] it is possible for raid5d to distribute stripe handling over multiple cores.
Igor Podlesny
2
[patch 0/5] Journal guided resync and support
unknown sender
7
Re: grow raid 6: different errors with mdadm 3.0.3 and 3.1
Andrew Burgess
none
Raid10 disc-activity every five seconds
Markus Doits
2
2.6.31+2.6.31.4: XFS - All I/O locks up to D-state after 24-48 hours (sysrq-t+w available)
Justin Piszcz
9
Re: RAID 5 rebuild fails with power interruption.
Goswin von Brederlow
5
Monday 23 November
[GIT PULL] async_tx/dma driver fixes for 2.6.32
Dan Williams
none
[PATCH] ppc440spe-adma: adds updated ppc440spe adma driver
Anatolij Gustschin
3
RAID, ext4, barriers
Andrew Dunn
1
Re: RAID-5 to RAID-6 Reshape Process
Goswin von Brederlow
none
RAID-5 to RAID-6 Reshape Process
Joshua Hattersley
1
Friday 20 November
Re: [patch 1/1] [mdadm] Add partition checks when creating a new array
Neil Brown
4
[PATCH 0/8] ioat fixes for 2.6.32
Dan Williams
8
RAID 6 freezing system when stripe_cache_size is increased from default
Enigma
none
ANNOUNCE: mdadm 3.1.1 - A tool for managing Soft RAID under Linux
Neil Brown
3
Thursday 19 November
Raid10 & Rhel
Erwan MAS
2
Wednesday 18 November
Raid10 layout
Erwan MAS
2
Tuesday 17 November
Re: User space RAID
Goswin von Brederlow
none
User space RAID
Piergiorgio Sartor
none
best common practice in case of degraded array with read errors
Mikael Abrahamsson
3
Re: raid10 layout for 2xSSDs
Goswin von Brederlow
1
RAID 6 Failure follow up
Andrew Dunn
22
Re: mismatch_cnt again
Martin K. Petersen
none
Re: mismatch_cnt again
Martin K. Petersen
none
Re: mismatch_cnt again
Goswin von Brederlow
none
Re: raid10 layout for 2xSSDs
Goswin von Brederlow
none
Re: raid10 layout for 2xSSDs
Goswin von Brederlow
none
Monday 16 November
Re: mismatch_cnt again
unknown sender
1
raid10 layout for 2xSSDs
Kasper Sandberg
4
Re: raid10 layout for 2xSSDs
Goswin von Brederlow
4
[uml-user] [PATCH 00/12] move compat_ioctl handling into drivers
Arnd Bergmann
4
Re: mismatch_cnt again
Goswin von Brederlow
none
Re: mismatch_cnt again
Goswin von Brederlow
1
RAID 5 rebuild fails with power interruption.
unknown sender
none
(unknown)
unknown sender
none
Re: mdadm 3.0.3 bug report
Neil Brown
none
Re: mismatch_cnt again
Neil Brown
4
Re: mismatch_cnt again
Goswin von Brederlow
none
hello
lovelyn
none
Sunday 15 November
IDE/RAID/AHCI setting in BIOS influcencing mdraid?
Martin MOKREJŠ
6
RE: Bitmap did not survive reboot
Leslie Rhorer
27
Re: mismatch_cnt again
Neil Brown
1
Re: Help - Urgent!!!
Neil Brown
4
Saturday 14 November
Re: mismatch_cnt again
Goswin von Brederlow
none
Re: mismatch_cnt again
Martin K. Petersen
1
[ANNOUNCE] mdadm-3.1 has been withdrawn
Neil Brown
17
Re: Help - Urgent!!!
unknown sender
1
Friday 13 November
Simple Raid-1 setup question
Kurt Newman
2
Re: Simple Raid-1 setup question
Neil Brown
none
Known-good LSI PCIe SAS HBAs?
Kristleifur Daðason
9
Re: Help - Urgent!!!
Neil Brown
3
[PULL REQUEST] a few more md patches....
Neil Brown
none
Re: Using 2.6.31 liveCD to grow (reshape) raid5 into raid6, then bacck to old kernel?
Neil Brown
1
Re: mismatch_cnt again
Goswin von Brederlow
none
Re: mismatch_cnt again
Goswin von Brederlow
none
Re: Help - Urgent!!!
Neil Brown
2
Re: Help - Urgent!!!
Neil Brown
none
Help - Urgent!!!
unknown sender
none
Help - Urgent!
Rhorer, Leslie
none
OOPS on MPC8548 board when writing RAID5 array
hank peng
2
Re: mismatch_cnt again
Neil Brown
none
Re: [ANNOUNCE] mdadm-3.1 has been withdrawn
Neil Brown
none
Re: [ANNOUNCE] mdadm-3.1 has been withdrawn
unknown sender
2
Thursday 12 November
Re: mismatch_cnt again
Goswin von Brederlow
13
Re: mismatch_cnt again
Martin K. Petersen
1
Using 2.6.31 liveCD to grow (reshape) raid5 into raid6, then bacck to old kernel?
Janek Kozicki
2
removing nonexistent drive from array
CoolCold
1
Re: mismatch_cnt again
unknown sender
none
[patch 1/1] [mdadm] Add partition checks when creating a new array
Trela, Maciej
none
Software Raid and mismatch_cnt
Andrian Jardan
none
Re: Intel Updates SSDs, Supports TRIM, Faster Writes
Martin K. Petersen
none
bitmap-chunk sizing on RAID-10?
Ben DJ
1
Re: Clarify /etc/mdadm.conf format and content?
Neil Brown
2
Clarify /etc/mdadm.conf format and content?
Ben DJ
7
Wednesday 11 November
md0: unknown partition table - should I worry?
Dexter Filmore
2
Re: Intel Updates SSDs, Supports TRIM, Faster Writes
Martin K. Petersen
1
Intel Updates SSDs, Supports TRIM, Faster Writes
Bill Davidsen
22
Re: Intel Updates SSDs, Supports TRIM, Faster Writes
Martin K. Petersen
1
Re: need help: corrupt files on one of my raids
Majed B.
5
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help