Re: raid10 layout for 2xSSDs

From
Goswin von Brederlow <hidden>
Date
2009-11-17 04:36:24
Robin Hill [off-list ref] writes:
On Mon Nov 16, 2009 at 04:26:32PM +0100, Goswin von Brederlow wrote:
quoted
What I'm aiming at is that offset might better fit into erase blocks,
cause less internal fragmentation on the disk and give better wear
leveling. Might improve speed and lifetime. But that is just a
thought. Maybe test and do ask Intel (or other vendors) about it.
I very much doubt this will make any difference.  With SSDs you have to
throw out any preconceptions of internal layout you may have.  You have
absolutely no idea (or control of) where two consecutive blocks will
actually get written.  Fragmentation and seek time are thus irrelevant
(or uncontrollable anyway).

I don't see how any RAID-10 layout would perform better than another
with SSDs, unless there's internal optimisations/constraints which
affect sequential reading from multiple devices.  I'm not aware of any
though - RAID-10 n2 may be the same layout as RAID-1 but it's an
entirely separate piece of code.

Cheers,
    Robin
Depending on the SSD in question the limiting factor will be the
number of IO operations per second. Some SSDs have shown that they can
write the same number of 1 byte blocks per second as they can write
64k bytes per second. If offset writes 2x 64k but far writes 4x 32k
then far will be half the speed on such a cheap SSD.

MfG
        Goswin
Thread (1 message) 1 message, 1 author, last reply 2009-11-17
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help