Thread (20 messages) 20 messages, 2 authors, 2018-09-06

Re: [PATCH v2 08/11] thermal: tsens: Check if the IP is correctly enabled by firmware

From: Bjorn Andersson <hidden>
Date: 2018-09-03 20:45:03
Also in: linux-arm-msm, lkml

On Thu 30 Aug 12:23 PDT 2018, Amit Kucheria wrote:
On Tue, Aug 28, 2018 at 7:08 PM, Amit Kucheria [off-list ref] wrote:
quoted
The SROT registers are initialised by the secure firmware at boot. We
don't have write access to the registers. Check if the block is enabled
before continuing.

Signed-off-by: Amit Kucheria <redacted>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
 drivers/thermal/qcom/tsens-common.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index 0b8a793f15f4..d250b757d1f0 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -12,6 +12,11 @@
 #include <linux/regmap.h>
 #include "tsens.h"

+/* SROT */
+#define CTRL_OFFSET            0x4
This OFFSET is not constant across the TSENS family and breaks atleast
one platform in the test below. I have a patch to fix this for all
platforms, will post it after a bit more testing.
Afaict the other 10 patches can be merged independently of this patch.

So please make the minor updates and resend them as a separate series,
with the acks/reviews, to make it easier for Eduardo to just pick them.

Regards,
Bjorn
quoted
+#define TSENS_EN               BIT(0)
+
+/* TM */
 #define STATUS_OFFSET          0x30
 #define SN_ADDR_OFFSET         0x4
 #define SN_ST_TEMP_MASK                0x3ff
@@ -119,6 +124,8 @@ int __init init_common(struct tsens_device *tmdev)
 {
        void __iomem *tm_base, *srot_base;
        struct resource *res;
+       u32 code;
+       int ret;
        struct platform_device *op = of_find_device_by_node(tmdev->dev->of_node);

        if (!op)
@@ -151,5 +158,15 @@ int __init init_common(struct tsens_device *tmdev)
        if (IS_ERR(tmdev->tm_map))
                return PTR_ERR(tmdev->tm_map);

+       if (tmdev->srot_map) {
+               ret = regmap_read(tmdev->srot_map, CTRL_OFFSET, &code);
+               if (ret)
+                       return ret;
+               if (!(code & TSENS_EN)) {
+                       dev_err(tmdev->dev, "tsens device is not enabled\n");
+                       return -ENODEV;
+               }
+       }
+
        return 0;
 }
--
2.17.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help