On 16-Aug 14:43, Pavan Kondeti wrote:

On Mon, Aug 06, 2018 at 05:39:44PM +0100, Patrick Bellasi wrote:

quoted

Clamp values cannot be tuned at the root cgroup level. Moreover, because
of the delegation model requirements and how the parent clamps
propagation works, if we want to enable subgroups to set a non null
util.min, we need to be able to configure the root group util.min to the
allow the maximum utilization (SCHED_CAPACITY_SCALE = 1024).

Unfortunately this setup will also mean that all tasks running in the
root group, will always get a maximum util.min clamp, unless they have a
lower task specific clamp which is definitively not a desirable default
configuration.

Let's fix this by explicitly adding a system default configuration
(sysctl_sched_uclamp_util_{min,max}) which works as a restrictive clamp
for all tasks running on the root group.

This interface is available independently from cgroups, thus providing a
complete solution for system wide utilization clamping configuration.

Signed-off-by: Patrick Bellasi <redacted>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Paul Turner <redacted>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Todd Kjos <redacted>
Cc: Joel Fernandes <redacted>
Cc: Steve Muckle <redacted>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Morten Rasmussen <redacted>
Cc: linux-kernel@vger.kernel.org
Cc: linux-pm@vger.kernel.org

<snip>

quoted

+/*
+ * Minimum utilization for tasks in the root cgroup
+ * default: 0
+ */
+unsigned int sysctl_sched_uclamp_util_min;
+
+/*
+ * Maximum utilization for tasks in the root cgroup
+ * default: 1024
+ */
+unsigned int sysctl_sched_uclamp_util_max = 1024;
+
+static struct uclamp_se uclamp_default[UCLAMP_CNT];
+

The default group id for un-clamped root tasks is 0 because of
this declaration, correct?

Yes, the clamp group 0 is (should be) initialized to track the system
default values:

  util_min = 0 and util_max = SCHED_CAPACITY_SCALE

but...

quoted

 /**
  * uclamp_map: reference counts a utilization "clamp value"
  * @value:    the utilization "clamp value" required

@@ -957,12 +971,25 @@ static inline int uclamp_task_group_id(struct task_struct *p, int clamp_id)
 	group_id = uc_se->group_id;
 
 #ifdef CONFIG_UCLAMP_TASK_GROUP
+	/*
+	 * Tasks in the root group, which do not have a task specific clamp
+	 * value, get the system default calmp value.
+	 */
+	if (group_id == UCLAMP_NOT_VALID &&
+	    task_group(p) == &root_task_group) {
+		return uclamp_default[clamp_id].group_id;
+	}
+
 	/* Use TG's clamp value to limit task specific values */
 	uc_se = &task_group(p)->uclamp[clamp_id];
 	if (group_id == UCLAMP_NOT_VALID ||
 	    clamp_value > uc_se->effective.value) {
 		group_id = uc_se->effective.group_id;
 	}
+#else
+	/* By default, all tasks get the system default clamp value */
+	if (group_id == UCLAMP_NOT_VALID)
+		return uclamp_default[clamp_id].group_id;
 #endif
 
 	return group_id;

@@ -1269,6 +1296,75 @@ static inline void uclamp_group_get(struct task_struct *p,
 	uclamp_group_put(clamp_id, prev_group_id);
 }
 
+int sched_uclamp_handler(struct ctl_table *table, int write,
+			 void __user *buffer, size_t *lenp,
+			 loff_t *ppos)
+{
+	int group_id[UCLAMP_CNT] = { UCLAMP_NOT_VALID };
+	struct uclamp_se *uc_se;
+	int old_min, old_max;
+	int result;
+
+	mutex_lock(&uclamp_mutex);
+
+	old_min = sysctl_sched_uclamp_util_min;
+	old_max = sysctl_sched_uclamp_util_max;
+
+	result = proc_dointvec(table, write, buffer, lenp, ppos);
+	if (result)
+		goto undo;
+	if (!write)
+		goto done;
+
+	if (sysctl_sched_uclamp_util_min > sysctl_sched_uclamp_util_max)
+		goto undo;
+	if (sysctl_sched_uclamp_util_max > 1024)
+		goto undo;
+
+	/* Find a valid group_id for each required clamp value */
+	if (old_min != sysctl_sched_uclamp_util_min) {
+		result = uclamp_group_find(UCLAMP_MIN, sysctl_sched_uclamp_util_min);
+		if (result == -ENOSPC) {
+			pr_err("Cannot allocate more than %d UTIL_MIN clamp groups\n",
+			       CONFIG_UCLAMP_GROUPS_COUNT);
+			goto undo;
+		}
+		group_id[UCLAMP_MIN] = result;
+	}
+	if (old_max != sysctl_sched_uclamp_util_max) {
+		result = uclamp_group_find(UCLAMP_MAX, sysctl_sched_uclamp_util_max);
+		if (result == -ENOSPC) {
+			pr_err("Cannot allocate more than %d UTIL_MAX clamp groups\n",
+			       CONFIG_UCLAMP_GROUPS_COUNT);
+			goto undo;
+		}
+		group_id[UCLAMP_MAX] = result;
+	}
+
+	/* Update each required clamp group */
+	if (old_min != sysctl_sched_uclamp_util_min) {
+		uc_se = &uclamp_default[UCLAMP_MIN];
+		uclamp_group_get(NULL, UCLAMP_MIN, group_id[UCLAMP_MIN],
+				 uc_se, sysctl_sched_uclamp_util_min);
+	}
+	if (old_max != sysctl_sched_uclamp_util_max) {
+		uc_se = &uclamp_default[UCLAMP_MAX];
+		uclamp_group_get(NULL, UCLAMP_MAX, group_id[UCLAMP_MAX],
+				 uc_se, sysctl_sched_uclamp_util_max);
+	}

... you are right hereafter: there are still some lose points.

uclamp_group_get() also drops the reference on the previous group id.
The initial group id for uclamp_default[] i.e 0 is never claimed by
us. so we end up releasing it. But root group still points to group#0.
is this a problem?

No, it's not correct... and it's similar to the issue you already
raised for the refcounting decrement on task exit.

I'm working on v4 to review and fixup all the lose points and missing
initializations (like in this case) related to the clamp groups
mapping refcounting.

Thanks for pointing this out!

Best,
Patrick

-- 
#include <best/regards.h>

Patrick Bellasi