Thread (25 messages) 25 messages, 7 authors, 2021-12-16

Re: [PATCH v3 0/6] MIPS: ralink: fix PCI IO resources

From: Greg KH <gregkh@linuxfoundation.org>
Date: 2021-10-05 10:36:37
Also in: linux-pci, linux-staging, lkml

On Sun, Oct 03, 2021 at 06:21:21PM +0200, Sergio Paracuellos wrote:
Hi Greg,

On Sat, Sep 25, 2021 at 10:32 PM Sergio Paracuellos
[off-list ref] wrote:
quoted
MIPs ralink need a special tratement regarding the way it handles PCI IO
resources. On MIPS I/O ports are memory mapped, so we access them using normal
load/store instructions. MIPS 'plat_mem_setup()' function does a call to
'set_io_port_base(KSEG1)'. There, variable 'mips_io_port_base'
is set then using this address which is a virtual address to which all
ports are being mapped. Ralink I/O space has a mapping of bus address
equal to the window into the mmio space, with an offset of IO start range
cpu address. This means that to have this working we need:
- linux port numbers in the range 0-0xffff.
- pci port numbers in the range 0-0xffff.
- io_offset being zero.

These means at the end to have bus address 0 mapped to IO range cpu address.
We need a way of properly set 'mips_io_port_base' with a virtually mapped
value of the IO cpu address.

This series do the following approach:
1) Revert two bad commit from a previous attempt of make this work [0].
2) Set PCI_IOBASE to mips 'mips_io_port_base'.
3) Allow architecture dependent 'pci_remap_iospace'.
4) Implement 'pci_remap_iospace' for MIPS.
5) Be sure IOBASE address for IO window is set with correct value.

More context about this series appoach in this mail thread [1].

Patches related with reverts are from this merge cycle so they are only
added to the staging git tree. So to have all stuff together I'd like to
get everybody Ack's to get all of this series through staging tree if
possible :).

Thanks in advance for your time.

Changes in v3:
 - Collect Arnd's Acked-by for the patches.
 - Be sure IO resource start address is zero and WARN_ONCE if it is not
   on MIPS pci_remap_iospace() patch. Also make use of 'resource_size'
   instead of do the logic explicitly again.
I think nothing is missing to get this added through the staging tree.
Great, thanks for sticking with this, will go queue it up now.

greg k-h
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help