Hi,

A gentle ping :)

Here are some new patches that need to be based on this series.

Thanks and best regards!

于 Sun, 30 May 2021 17:49:17 +0100
Paul Cercueil [off-list ref] 写道:

Hi,

Here is (finally) my v2 of the JZ4760(B) patchset.

Patches 1-5 are the exact same as in v1.

Patch 6's algorithm was updated with Zhou's feedback.

Cheers,
-Paul

Paul Cercueil (6):
  dt-bindings: clock: ingenic: Add ingenic,jz4760{,b}-cgu compatibles
  clk: Support bypassing dividers
  clk: ingenic: Read bypass register only when there is one
  clk: ingenic: Remove pll_info.no_bypass_bit
  clk: ingenic: Support overriding PLLs M/N/OD calc algorithm
  clk: ingenic: Add support for the JZ4760

 .../bindings/clock/ingenic,cgu.yaml           |   4 +
 drivers/clk/ingenic/Kconfig                   |  10 +
 drivers/clk/ingenic/Makefile                  |   1 +
 drivers/clk/ingenic/cgu.c                     |  92 ++--
 drivers/clk/ingenic/cgu.h                     |  12 +-
 drivers/clk/ingenic/jz4725b-cgu.c             |  12 +-
 drivers/clk/ingenic/jz4740-cgu.c              |  12 +-
 drivers/clk/ingenic/jz4760-cgu.c              | 428
++++++++++++++++++ drivers/clk/ingenic/jz4770-cgu.c              |
15 +- drivers/clk/ingenic/tcu.c                     |   2 +
 include/dt-bindings/clock/jz4760-cgu.h        |  54 +++
 11 files changed, 586 insertions(+), 56 deletions(-)
 create mode 100644 drivers/clk/ingenic/jz4760-cgu.c
 create mode 100644 include/dt-bindings/clock/jz4760-cgu.h