On Sun, 2021-07-11 at 09:21 +0800, Chun-Kuang Hu wrote:

Hi, Jason:

jason-jh.lin [off-list ref] 於 2021年7月10日 週六 下午7:38寫道：

quoted

Add definition for mt8195 display.

Signed-off-by: jason-jh.lin <redacted>
---
 .../bindings/display/mediatek/mediatek,disp.txt          | 9
+++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git
a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.
txt
b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.
txt
index fbb59c9ddda6..de6226d4bca3 100644
---
a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.
txt
+++
b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.
txt

@@ -37,6 +37,7 @@ Required properties (all function blocks):
        "mediatek,<chip>-disp-aal"              - adaptive ambient

light controller
        "mediatek,<chip>-disp-gamma"            - gamma correction
        "mediatek,<chip>-disp-merge"            - merge streams
from two RDMA sources
+       "mediatek,<chip>-disp-dsc"              - DSC controller,
see mediatek,dsc.yaml

You add dsc binding document in yaml format, so I would like you to
change this binding document to yaml format.

Regards,
Chun-Kuang.

Hi CK,

OK, I will change this binding document to yaml format at the next
version.

Regards,
Jason-JH.Lin

quoted

        "mediatek,<chip>-disp-postmask"         - control round
corner for display frame
        "mediatek,<chip>-disp-split"            - split stream to
two encoders
        "mediatek,<chip>-disp-ufoe"             - data compression
engine

@@ -44,7 +45,7 @@ Required properties (all function blocks):
        "mediatek,<chip>-dpi"                   - DPI controller,

see mediatek,dpi.txt
        "mediatek,<chip>-disp-mutex"            - display mutex
        "mediatek,<chip>-disp-od"               - overdrive
-  the supported chips are mt2701, mt7623, mt2712, mt8167, mt8173,
mt8183 and mt8192.
+  the supported chips are mt2701, mt7623, mt2712, mt8167, mt8173,
mt8183, mt8192 and mt8195.
 - reg: Physical base address and length of the function block
register space
 - interrupts: The interrupt signal from the function block
(required, except for
   merge and split function blocks).

@@ -60,7 +61,7 @@ Required properties (DMA function blocks):
        "mediatek,<chip>-disp-ovl"
        "mediatek,<chip>-disp-rdma"
        "mediatek,<chip>-disp-wdma"
-  the supported chips are mt2701, mt8167 and mt8173.
+  the supported chips are mt2701, mt8167, mt8173 and mt8195.
 - larb: Should contain a phandle pointing to the local arbiter

device as defined
   in Documentation/devicetree/bindings/memory-
controllers/mediatek,smi-larb.yaml
 - iommus: Should point to the respective IOMMU block with master
port as

@@ -217,3 +218,7 @@ od@14023000 {
        power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
        clocks = <&mmsys CLK_MM_DISP_OD>;
 };
+
+dsc0: disp_dsc_wrap@1c009000 {
+       /* See mediatek,dsc.yaml for details */
+};
--

2.18.0

-- 
Jason-JH Lin [off-list ref]
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek