[PATCH 09/13] HID: ft260: gpio: group sysfs attrs per HID interface

From
Michael Zaidman <michael.zaidman@gmail.com>
Date
2026-08-22 21:40:48
Also in
linux-gpio, linux-i2c, lkml
Reply to
Michael Zaidman, 2026-08-22
Split the single sysfs attribute group into per-interface groups based
on chip mode (DCNF0/DCNF1):

- I2C-only (mode 1): full I2C + GPIO attributes on the I2C HID iface
- Dual mode (0/3): I2C-facing attrs on the I2C iface; GPIO and UART
  attrs on the UART iface
- UART-only (mode 2): GPIO and UART attrs on the UART iface

Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
---
 drivers/hid/hid-ft260.c | 58 +++++++++++++++++++++++++++++++++++------
 1 file changed, 50 insertions(+), 8 deletions(-)
diff --git a/drivers/hid/hid-ft260.c b/drivers/hid/hid-ft260.c
index 554d8e3ddb6d..0a1875a1a7ec 100644
--- a/drivers/hid/hid-ft260.c
+++ b/drivers/hid/hid-ft260.c
@@ -1592,7 +1592,7 @@ static ssize_t i2c_reset_store(struct device *kdev,
 }
 static DEVICE_ATTR_WO(i2c_reset);
 
-static const struct attribute_group ft260_attr_group = {
+static const struct attribute_group ft260_i2c_chip_mode_1_attr_group = {
 	.attrs = (struct attribute *[]) {
 		  &dev_attr_chip_mode.attr,
 		  &dev_attr_pwren_status.attr,
@@ -1603,11 +1603,35 @@ static const struct attribute_group ft260_attr_group = {
 		  &dev_attr_gpio2_func.attr,
 		  &dev_attr_gpioa_func.attr,
 		  &dev_attr_gpiog_func.attr,
+		  &dev_attr_clock_ctl.attr,
+		  &dev_attr_i2c_reset.attr,
+		  &dev_attr_clock.attr,
+		  NULL
+	}
+};
+
+static const struct attribute_group ft260_i2c_chip_mode_0_3_attr_group = {
+	.attrs = (struct attribute *[]) {
+		  &dev_attr_hid_over_i2c_en.attr,
+		  &dev_attr_i2c_reset.attr,
+		  &dev_attr_clock.attr,
+		  NULL
+	}
+};
+
+static const struct attribute_group ft260_uart_chip_mode_0_2_3_attr_group = {
+	.attrs = (struct attribute *[]) {
+		  &dev_attr_chip_mode.attr,
+		  &dev_attr_pwren_status.attr,
+		  &dev_attr_suspend_status.attr,
+		  &dev_attr_power_saving_en.attr,
+		  &dev_attr_gpio2_func.attr,
+		  &dev_attr_gpioa_func.attr,
+		  &dev_attr_gpiog_func.attr,
 		  &dev_attr_uart_mode.attr,
 		  &dev_attr_uart_dcd_ri.attr,
 		  &dev_attr_clock_ctl.attr,
 		  &dev_attr_i2c_reset.attr,
-		  &dev_attr_clock.attr,
 		  NULL
 	}
 };
@@ -2240,7 +2264,16 @@ static int ft260_i2c_probe(struct ft260_device *dev,
 		if (ret)
 			goto err_i2c_free;
 
-		ret = sysfs_create_group(&hdev->dev.kobj, &ft260_attr_group);
+		ret = sysfs_create_group(&hdev->dev.kobj,
+					 &ft260_i2c_chip_mode_1_attr_group);
+		if (ret < 0) {
+			hid_err(hdev, "failed to create sysfs attrs\n");
+			goto err_i2c_free;
+		}
+	} else if (cfg->chip_mode == FT260_MODE_ALL ||
+		   cfg->chip_mode == FT260_MODE_BOTH) {
+		ret = sysfs_create_group(&hdev->dev.kobj,
+					 &ft260_i2c_chip_mode_0_3_attr_group);
 		if (ret < 0) {
 			hid_err(hdev, "failed to create sysfs attrs\n");
 			goto err_i2c_free;
@@ -2306,12 +2339,14 @@ static int ft260_uart_probe(struct ft260_device *dev,
 	cfg->uart_mode = FT260_UART_CFG_FLOW_CTRL_NONE;
 
 	if (dev->chip_mode & FT260_MODE_UART ||
-	    dev->chip_mode == FT260_MODE_ALL) {
+	    dev->chip_mode == FT260_MODE_ALL ||
+	    dev->chip_mode == FT260_MODE_BOTH) {
 		ret = ft260_gpio_init(dev, cfg);
 		if (ret)
 			goto err_hid_report;
 
-		ret = sysfs_create_group(&hdev->dev.kobj, &ft260_attr_group);
+		ret = sysfs_create_group(&hdev->dev.kobj,
+					 &ft260_uart_chip_mode_0_2_3_attr_group);
 		if (ret < 0) {
 			hid_err(hdev, "failed to create sysfs attrs\n");
 			goto err_hid_report;
@@ -2418,12 +2453,19 @@ static void ft260_remove(struct hid_device *hdev)
 		ft260_uart_port_remove(dev);
 		/* dev is still needed, so we will free it in _destroy func */
 		if (dev->chip_mode & FT260_MODE_UART ||
-		    dev->chip_mode == FT260_MODE_ALL)
-			sysfs_remove_group(&hdev->dev.kobj, &ft260_attr_group);
+		    dev->chip_mode == FT260_MODE_ALL ||
+		    dev->chip_mode == FT260_MODE_BOTH)
+			sysfs_remove_group(&hdev->dev.kobj,
+					   &ft260_uart_chip_mode_0_2_3_attr_group);
 
 	} else {
 		if (dev->chip_mode == FT260_MODE_I2C)
-			sysfs_remove_group(&hdev->dev.kobj, &ft260_attr_group);
+			sysfs_remove_group(&hdev->dev.kobj,
+					   &ft260_i2c_chip_mode_1_attr_group);
+		else if (dev->chip_mode == FT260_MODE_ALL ||
+			 dev->chip_mode == FT260_MODE_BOTH)
+			sysfs_remove_group(&hdev->dev.kobj,
+					   &ft260_i2c_chip_mode_0_3_attr_group);
 		i2c_del_adapter(&dev->adap);
 		kfree(dev);
 	}
-- 
2.43.0
Thread (52 messages) 52 messages, 5 authors, last reply 2026-09-26
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help