On 07/12/2023 18:03, Biju Das wrote:
Trim the quote from irrelevant context, especially if your email client
malforms replies... (because it does)
quoted
quoted
@@ -35,6 +42,19 @@ properties:
"#interrupt-cells":
const: 2
+ gpio:
Old binding did not have such node and nothing in commit msg explained
changes from pure conversion.
OK will update the commit message. Check patch complained about undocumented compatible.
quoted
quoted
+ type: object
+ $ref: /schemas/gpio/gpio.yaml#
?!? Why? First: It's always selected. Second, so you have two gpio
controllers? And original binding had 0? Why this is not explained at all?
Open the binding and look at its properties.
I have referred[1] and [2] to add gpio controller property.
[1]
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi?h=next-20231207#n95
[2]
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/Documentation/devicetree/bindings/mfd/da9062.txt?h=next-20231207#n38
But does it make sense? Don't just blindly copy things, but actually
investigate whether this is correct DTS.
quoted
quoted
+ unevaluatedProperties: false
+ properties:
+ compatible:
+ const: dlg,da9062-gpio
+
+ gpio-controller: true
And here is the second gpio-controller...
So you mean it is redundant as $ref: /schemas/gpio/gpio.yaml
has already defined gpio-controller for this object??
I meant this would mean you have two GPIO controllers. Why one device
would have two GPIO controllers? Please answer to this in commit msg, so
there will be no questions/concerns. You have entire commit msg to
explain all weird and unexpected things with this binding.
...
quoted
quoted
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/regulator/dlg,da9063-regulator.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pmic@58 {
+ compatible = "dlg,da9062";
+ reg = <0x58>;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ gpio {
+ compatible = "dlg,da9062-gpio";
+ status = "disabled";
Why?
Why disabling? Drop all statuses from all your binding examples.
quoted
Where are gpio-controller and cells? For this node and for parent? Why
this example is incomplete?
I have used a real example [1] here.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi?h=next-20231207#n95
Currently I don't see any driver is using this compatible other than MFD.
Open the MFD so you will see it...
Best regards,
Krzysztof