[PATCH v3 10/10] dt-bindings: iio: temperature: use spi-peripheral-props.yaml
flat view
STALE1519d
LANDED
From: Krzysztof Kozlowski <hidden>
Date: 2022-08-16 12:46:08
Also in:
linux-devicetree, linux-iio, lkml
Subsystem:
iio subsystem and drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Jonathan Cameron, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Revision v3 of 2 in this series; landed in mainline as 14a4d22ead0d on 2022-08-19.
Revisions (2)
- v2 [diff vs current]
- v3 current
Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by: Krzysztof Kozlowski <redacted> --- .../bindings/iio/temperature/maxim,max31855k.yaml | 4 ++-- .../devicetree/bindings/iio/temperature/maxim,max31856.yaml | 6 ++++-- .../devicetree/bindings/iio/temperature/maxim,max31865.yaml | 6 ++++-- 3 files changed, 10 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml
index 9969bac66aa1..0805ed7e2113 100644
--- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml@@ -32,7 +32,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true spi-cpha: true required:
@@ -40,6 +39,7 @@ required: - reg allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible:
@@ -53,7 +53,7 @@ allOf: properties: spi-cpha: false -additionalProperties: false +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml
index 873b34766676..228a94165487 100644
--- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml@@ -19,7 +19,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true spi-cpha: true thermocouple-type:
@@ -34,7 +33,10 @@ required: - reg - spi-cpha -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
index aafb33b16549..a2823ed6867b 100644
--- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml@@ -25,7 +25,6 @@ properties: enables 3-wire RTD connection. Else 2-wire or 4-wire RTD connection. type: boolean - spi-max-frequency: true spi-cpha: true required:
@@ -33,7 +32,10 @@ required: - reg - spi-cpha -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
--
2.34.1