[PATCH v3 03/10] dt-bindings: iio: amplifiers: adi,ada4250: use spi-peripheral-props.yaml
flat view
STALE1519d
LANDED
From: Krzysztof Kozlowski <hidden>
Date: 2022-08-16 12:44:30
Also in:
linux-devicetree, linux-iio, lkml
Subsystem:
analog devices inc ada4250 driver, analog devices inc iio drivers, iio subsystem and drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Antoniu Miclaus, Nuno Sá, Michael Hennerich, Jonathan Cameron, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Revision v3 of 2 in this series; landed in mainline as 1deca207e154 on 2022-08-19.
Revisions (2)
- v2 [diff vs current]
- v3 current
Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by: Krzysztof Kozlowski <redacted> --- .../devicetree/bindings/iio/amplifiers/adi,ada4250.yaml | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
index 5277479be382..c15da155d300 100644
--- a/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
+++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml@@ -27,14 +27,15 @@ properties: Enable internal buffer to drive the reference pin. type: boolean - spi-max-frequency: true - required: - compatible - reg - avdd-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
--
2.34.1