[PATCH v3 01/10] dt-bindings: iio: adc: use spi-peripheral-props.yaml
flat view
STALE1519d
LANDED: 6 (6M)
From: Krzysztof Kozlowski <hidden>
Date: 2022-08-16 12:43:59
Also in:
linux-devicetree, linux-iio, lkml
Subsystem:
analog devices inc ad7192 driver, analog devices inc ad7292 driver, analog devices inc ad7768-1 driver, analog devices inc iio drivers, iio subsystem and drivers, microchip mcp3911 adc driver, open firmware and flattened device tree bindings, the rest, ti tsc2046 adc driver · Maintainers:
Alisa-Dariana Roman, Marcelo Schmitt, Michael Hennerich, Nuno Sá, Jonathan Cameron, Marcus Folkesson, Kent Gustavsson, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Oleksij Rempel
Revision v3 of 2 in this series; 1 review trailer (1 from subsystem maintainers); landed in mainline as 801373884560 on 2022-08-19.
Revisions (2)
- v2 [diff vs current]
- v3 current
Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by: Krzysztof Kozlowski <redacted> Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com> --- .../bindings/iio/adc/adi,ad7124.yaml | 7 ++--- .../bindings/iio/adc/adi,ad7192.yaml | 7 ++--- .../bindings/iio/adc/adi,ad7280a.yaml | 7 ++--- .../bindings/iio/adc/adi,ad7292.yaml | 7 ++--- .../bindings/iio/adc/adi,ad7298.yaml | 6 +++-- .../bindings/iio/adc/adi,ad7476.yaml | 8 +++--- .../bindings/iio/adc/adi,ad7606.yaml | 7 ++--- .../bindings/iio/adc/adi,ad7768-1.yaml | 7 ++--- .../bindings/iio/adc/adi,ad7923.yaml | 7 ++--- .../bindings/iio/adc/adi,ad7949.yaml | 7 ++--- .../bindings/iio/adc/holt,hi8435.yaml | 7 ++--- .../bindings/iio/adc/lltc,ltc2496.yaml | 8 +++--- .../bindings/iio/adc/maxim,max1027.yaml | 5 +++- .../bindings/iio/adc/maxim,max11100.yaml | 7 +++-- .../bindings/iio/adc/maxim,max1118.yaml | 26 ++++++++++--------- .../bindings/iio/adc/maxim,max1241.yaml | 7 ++--- .../bindings/iio/adc/microchip,mcp3201.yaml | 6 +++-- .../bindings/iio/adc/microchip,mcp3911.yaml | 5 +++- .../bindings/iio/adc/ti,adc0832.yaml | 7 ++--- .../bindings/iio/adc/ti,adc084s021.yaml | 7 ++--- .../bindings/iio/adc/ti,adc108s102.yaml | 6 +++-- .../bindings/iio/adc/ti,adc12138.yaml | 7 ++--- .../bindings/iio/adc/ti,adc128s052.yaml | 7 ++--- .../bindings/iio/adc/ti,adc161s626.yaml | 7 ++--- .../bindings/iio/adc/ti,ads124s08.yaml | 7 ++--- .../bindings/iio/adc/ti,ads131e08.yaml | 7 ++--- .../bindings/iio/adc/ti,ads8344.yaml | 7 ++--- .../bindings/iio/adc/ti,ads8688.yaml | 7 ++--- .../bindings/iio/adc/ti,tlc4541.yaml | 7 ++--- .../bindings/iio/adc/ti,tsc2046.yaml | 7 ++--- 30 files changed, 131 insertions(+), 93 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
index fb3d0dae9bae..75a7184a4735 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml@@ -52,8 +52,6 @@ properties: avdd-supply: description: avdd supply can be used as reference for conversion. - spi-max-frequency: true - required: - compatible - reg
@@ -106,7 +104,10 @@ patternProperties: additionalProperties: false -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
index 22b7ed3723f6..cc347dade4ef 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml@@ -30,8 +30,6 @@ properties: spi-cpha: true - spi-max-frequency: true - clocks: maxItems: 1 description: phandle to the master clock (mclk)
@@ -94,7 +92,10 @@ required: - spi-cpol - spi-cpha -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml
index a694d5794d4a..dfb8f305e2f0 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml@@ -28,8 +28,6 @@ properties: description: IRQ line for the ADC maxItems: 1 - spi-max-frequency: true - adi,voltage-alert-last-chan: $ref: /schemas/types.yaml#/definitions/uint32 description:
@@ -55,7 +53,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
index a3e39a40c9b3..1bfbeed6f299 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml@@ -30,8 +30,6 @@ properties: spi-cpha: true - spi-max-frequency: true - '#address-cells': const: 1
@@ -65,7 +63,10 @@ patternProperties: additionalProperties: true -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml
index ca414bb396c5..cd8ac5162d27 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml@@ -24,13 +24,15 @@ properties: vref-supply: true vdd-supply: true - spi-max-frequency: true required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
index 666414a9c0de..44c671eeda73 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml@@ -66,8 +66,6 @@ properties: to the other supplies. Needed to be able to establish channel scaling unless there is also an internal reference available (e.g. ad7091r) - spi-max-frequency: true - adi,conversion-start-gpios: description: A GPIO used to trigger the start of a conversion maxItems: 1
@@ -76,9 +74,9 @@ required: - compatible - reg -additionalProperties: false - allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + # Devices where reference is vcc - if: properties:
@@ -158,6 +156,8 @@ allOf: properties: adi,conversion-start-gpios: false +unevaluatedProperties: false + examples: - | spi {
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index 516fc24d3346..ac5a47c8f070 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml@@ -32,8 +32,6 @@ properties: spi-cpol: true - spi-max-frequency: true - avcc-supply: true interrupts:
@@ -105,7 +103,10 @@ required: - interrupts - adi,conversion-start-gpios -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
index a85a28145ef6..3ce59d4d065f 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml@@ -50,8 +50,6 @@ properties: reset-gpios: maxItems: 1 - spi-max-frequency: true - spi-cpol: true spi-cpha: true
@@ -88,7 +86,10 @@ patternProperties: - reg additionalProperties: false -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
index e82194974eea..24a810c23197 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml@@ -43,13 +43,14 @@ properties: '#size-cells': const: 0 - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
index 0b10ed5f74ae..9ee4d977c5ed 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml@@ -49,8 +49,6 @@ properties: default: 4096000 - spi-max-frequency: true - '#io-channel-cells': const: 1
@@ -64,7 +62,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
index 52490cbb0af0..56bcbe5dcd79 100644
--- a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml@@ -24,8 +24,6 @@ properties: GPIO used for controlling the reset pin maxItems: 1 - spi-max-frequency: true - "#io-channel-cells": const: 1
@@ -33,7 +31,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
index 0bd2fc0356c8..5207c919abe0 100644
--- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml@@ -22,15 +22,15 @@ properties: reg: maxItems: 1 - spi-max-frequency: - description: maximal spi bus frequency supported - required: - compatible - vref-supply - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
index 46b7747076b9..d0a7ed26d9ea 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml@@ -45,7 +45,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
index 0cf87556ef82..4f74cb33383a 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml@@ -26,13 +26,16 @@ properties: minimum: 100000 maximum: 4800000 -additionalProperties: false - required: - compatible - reg - vref-supply +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi {
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
index e948b3e37b0c..bb336e33ebe2 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml@@ -28,23 +28,25 @@ properties: vref-supply: description: External reference, needed to establish input scaling -if: - properties: - compatible: - contains: - const: maxim,max1118 -then: - required: - - vref-supply -else: - properties: - vref-supply: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + properties: + compatible: + contains: + const: maxim,max1118 + then: + required: + - vref-supply + else: + properties: + vref-supply: false required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
index 4c7e0d94bff1..58b12fe8070c 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml@@ -39,15 +39,16 @@ properties: thus enabling power-down mode. maxItems: 1 - spi-max-frequency: true - required: - compatible - reg - vdd-supply - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
index fcc1ba53b20d..18108f0f3731 100644
--- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml@@ -32,7 +32,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true spi-cpha: true spi-cpol: true
@@ -51,7 +50,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
index 95ab285f4eba..067a7bbadab8 100644
--- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml@@ -51,7 +51,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
index f5a923cc847f..686721176a58 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml@@ -24,8 +24,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: External reference, needed to establish input scaling
@@ -37,7 +35,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml
index 1a113b30a414..726d2cbfa368 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml@@ -19,8 +19,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: External reference, needed to establish input scaling
@@ -37,7 +35,10 @@ required: - spi-cpol - spi-cpha -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
index ae5ce60987fe..9b072b057f16 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml@@ -19,7 +19,6 @@ properties: reg: true vref-supply: true - spi-max-frequency: true "#io-channel-cells": const: 1
@@ -28,7 +27,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
index ec3b2edf1fb7..076088a328c3 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml@@ -31,8 +31,6 @@ properties: maxItems: 1 description: Conversion clock input. - spi-max-frequency: true - vref-p-supply: description: The regulator supply for positive analog voltage reference
@@ -62,7 +60,10 @@ required: - clocks - vref-p-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
index d54a0183f024..775eee972b12 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml@@ -27,8 +27,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: true "#io-channel-cells":
@@ -39,7 +37,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
index 3f4f334d6f73..afe782522904 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml@@ -21,8 +21,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vdda-supply: true "#io-channel-cells":
@@ -32,7 +30,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml
index 2e6abc9d746a..56a3f1766aab 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml@@ -18,8 +18,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - spi-cpha: true reset-gpios:
@@ -32,7 +30,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
index e0670e3fbb72..5882de6fd967 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml@@ -28,8 +28,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - spi-cpha: true clocks:
@@ -120,7 +118,10 @@ patternProperties: additionalProperties: false -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
index b8c398187d5c..f75b2c702986 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml@@ -19,8 +19,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: Supply the 2.5V or 5V reference voltage
@@ -32,7 +30,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
index a0af4b24877f..f26fdbc15f84 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml@@ -25,13 +25,14 @@ properties: description: Optional external reference. If not supplied, assume REFSEL input tied low to enable the internal reference. - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
index 6c2539b3d707..314d1d99bf73 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml@@ -21,8 +21,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: true "#io-channel-cells":
@@ -33,7 +31,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
index 601d69971d84..0b48814c0dc2 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml@@ -23,8 +23,6 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - "#io-channel-cells": const: 1
@@ -59,7 +57,10 @@ patternProperties: additionalProperties: false -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - |
--
2.34.1