Implement EDID reading and monitor detection support for HDMI and DVI outputs.
This set is based on the previously sent "OMAP: DSS2: misc improvements" set.
Tomi
Tomi Valkeinen (12):
OMAP: DSS2: add read_edid() to omap_dss_driver struct
OMAP: DSS2: add detect() to omap_dss_driver struct
OMAP: DSS2: HDMI: make set_timing saner
OMAP: DSS2: HDMI: implement read_edid()
OMAP: DSS2: HDMI: remove edid parsing
OMAP: DSS2: HDMI: split hdmi_core_ddc_edid
OMAP: DSS2: HDMI: clean up edid reading & fix checksum
OMAP: DSS2: HDMI: remove error prints in check_timings
OMAP: DSS2: HDMI: implement detect()
OMAP: DSS2: Generic-dpi: add detect & read_edid support
OMAP: Panda & Beagle: DVI: Add i2c_bus_num
OMAPFB: find best mode from edid
arch/arm/mach-omap2/board-omap3beagle.c | 1 +
arch/arm/mach-omap2/board-omap4panda.c | 1 +
drivers/video/omap2/displays/panel-generic-dpi.c | 92 ++++++
drivers/video/omap2/dss/dss.h | 2 +
drivers/video/omap2/dss/hdmi.c | 323 +++++++++-------------
drivers/video/omap2/dss/hdmi_omap4_panel.c | 66 ++++-
drivers/video/omap2/omapfb/omapfb-main.c | 109 +++++++-
include/video/omap-panel-generic-dpi.h | 2 +
include/video/omapdss.h | 3 +
9 files changed, 378 insertions(+), 221 deletions(-)
--
1.7.4.1