Re: [PATCH 11/12] OMAP: Panda & Beagle: DVI: Add i2c_bus_num
flat view
From: Andy Doan <hidden>
Date: 2011-08-31 15:00:43
Also in:
linux-omap
On 08/31/2011 08:23 AM, Tomi Valkeinen wrote:
quoted hunk ↗ jump to hunk
Add i2c bus number for DVI output. The driver uses this to detect if a panel is connected and to read EDID. Signed-off-by: Tomi Valkeinen<redacted> --- arch/arm/mach-omap2/board-omap3beagle.c | 1 + arch/arm/mach-omap2/board-omap4panda.c | 1 + 2 files changed, 2 insertions(+), 0 deletions(-)diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 3ae16b4..13244e9 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c@@ -207,6 +207,7 @@ static struct panel_generic_dpi_data dvi_panel = { .name = "generic", .platform_enable = beagle_enable_dvi, .platform_disable = beagle_disable_dvi, + .i2c_bus_num = 3, }; static struct omap_dss_device beagle_dvi_device = {diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 9aaa960..d5760e3 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c@@ -459,6 +459,7 @@ static struct panel_generic_dpi_data omap4_dvi_panel = { .name = "generic", .platform_enable = omap4_panda_enable_dvi, .platform_disable = omap4_panda_disable_dvi, + .i2c_bus_num = 3, }; struct omap_dss_device omap4_panda_dvi_device = {
Can you add a similar patch for board-overo.c? I've tested earlier versions of this patch series on a Tide+Tobi successfully. Here's a copy of my patch: http://tinyurl.com/3cek5m7