Re: [PATCH 11/12] OMAP: Panda & Beagle: DVI: Add i2c_bus_num

On Wed, 2011-08-31 at 10:00 -0500, Andy Doan wrote:

On 08/31/2011 08:23 AM, Tomi Valkeinen wrote:

quoted

Add i2c bus number for DVI output. The driver uses this to detect if a
panel is connected and to read EDID.

Signed-off-by: Tomi Valkeinen<redacted>
---
  arch/arm/mach-omap2/board-omap3beagle.c |    1 +
  arch/arm/mach-omap2/board-omap4panda.c  |    1 +
  2 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 3ae16b4..13244e9 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c

@@ -207,6 +207,7 @@ static struct panel_generic_dpi_data dvi_panel = {
  	.name = "generic",
  	.platform_enable = beagle_enable_dvi,
  	.platform_disable = beagle_disable_dvi,
+	.i2c_bus_num = 3,
  };

  static struct omap_dss_device beagle_dvi_device = {

diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 9aaa960..d5760e3 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c

@@ -459,6 +459,7 @@ static struct panel_generic_dpi_data omap4_dvi_panel = {
  	.name			= "generic",
  	.platform_enable	= omap4_panda_enable_dvi,
  	.platform_disable	= omap4_panda_disable_dvi,
+	.i2c_bus_num = 3,
  };

  struct omap_dss_device omap4_panda_dvi_device = {

Can you add a similar patch for board-overo.c? I've tested earlier 
versions of this patch series on a Tide+Tobi successfully. Here's a copy 
of my patch:

   http://tinyurl.com/3cek5m7

Sure. I only added the boards I know have the ddc i2c on bus 3 (i.e.
those I was able to test).

 Tomi