quoted hunk ↗ jump to hunk
-----Original Message-----
From: <redacted>
[mailto:linux-omap-owner@vger.kernel.org] On Behalf Of Tushar Behera
Sent: Monday, June 20, 2011 4:16 PM
To: <redacted>;
linux-arm-kernel@lists.infradead.org;
linux-fbdev@vger.kernel.org; linux-omap@vger.kernel.org
Cc: <redacted>; tony@atomide.com;
lethal@linux-sh.org; linaro-dev@lists.linaro.org;
patches@linaro.org; Nilofer, Samreen
Subject: [PATCH 1/2] config: omap2+: force fb and dss support
as built-in
In certain board files, there are references to vram related functions
which are defined in drivers/video/omap2/vram.c. Because of
this direct
dependency, CONFIG_FB_OMAP2 should be a built-in feature.
As per the current architecture, CONFIG_FB_OMAP2 is dependent on
CONFIG_OMAP2_DSS. Hence CONFIG_OMAP2_DSS support should also
be selected
by default.
Cc: Tony Lindgren <tony@atomide.com>
Cc: Samreen <redacted>
Signed-off-by: Tushar Behera <redacted>
---
arch/arm/mach-omap2/built-in.o: In function `rx51_video_mem_init':
linux-linaro-2.6.39/arch/arm/mach-omap2/board-rx51-video.c:97:
undefined reference to `omap_vram_set_sdram_vram'
arch/arm/plat-omap/built-in.o: In function `omap_reserve':
linux-linaro-2.6.39/arch/arm/plat-omap/common.c:66: undefined
reference to `omap_vram_reserve_sdram_memblock'
arch/arm/plat-omap/built-in.o: In function `omap_detect_sram':
linux-linaro-2.6.39/arch/arm/plat-omap/sram.c:179: undefined
reference to `omap_vram_reserve_sram'
make[1]: *** [.tmp_vmlinux1] Error 1
make: *** [sub-make] Error 2
arch/arm/configs/omap2plus_defconfig | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/configs/omap2plus_defconfig
b/arch/arm/configs/omap2plus_defconfig
index d5f00d7..c3ffff2 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -138,11 +138,11 @@ CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_OMAP_LCD_VGA=y
-CONFIG_OMAP2_DSS=m
+CONFIG_OMAP2_DSS=y
CONFIG_OMAP2_DSS_RFBI=y
CONFIG_OMAP2_DSS_SDI=y
CONFIG_OMAP2_DSS_DSI=y
-CONFIG_FB_OMAP2=m
+CONFIG_FB_OMAP2=y
CONFIG_PANEL_GENERIC_DPI=m
CONFIG_PANEL_SHARP_LS037V7DW01=m
CONFIG_PANEL_NEC_NL8048HL11_01B=m
[sp] Instead of changing the omap2plus_defconfig, shouldn't the
board specific file be fixed instead?
~sanjeev
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe
linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html