On Wed, Jul 16, 2008 at 3:09 PM, Jaya Kumar [off-list ref] wrote:
On Tue, Jul 15, 2008 at 11:55 PM, eric miao [off-list ref] wrote:
quoted
On Sun, Jul 13, 2008 at 9:26 PM, Jaya Kumar [off-list ref] wrote:
quoted
This patch converts gumstix over to the MFP configuration system and adds
bluetooth support. Added a CLK_32K clock to enable bluetooth.
The CLK_32KHz is assumed to be enabled always, so it's really not
necessary to create a struct clk for it. Please remove that from this
patch.
Hi Eric,
Ok, I will take it out.
To clarify, the bulk of gumstix's that have been shipped all come with
U-boot 1.1.4 which does not turn it on by default and so my intention
based on your previous feedback was basically: if CLK_32K not on, then
warn the user, and then turn on the clk32k so that bluetooth works on
such boards.
Then we should probably enable the 32K OSCC in the board init code
instead, maybe gumstix_init_32K() in gumstix_init(). Feel free to fire
another patch for this please, and leave enough comments.
Thanks,
jaya
--
Cheers
- eric
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/