Re: Re: still ..Confused about atyfb and M1

Am Samstag, 7. Februar 2004 18:54 schrieb Geert Uytterhoeven:

On Fri, 6 Feb 2004, Richard Smith wrote:

quoted

Geert Uytterhoeven wrote:

quoted

01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility
P/M AGP 2x (rev 64) (prog-if 00 [VGA]) Subsystem: Sony Corporation:
Unknown device 80c7
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+
ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency:
66 (2000ns min), Cache Line Size: 0x08 (32 bytes) Interrupt: pin A
routed to IRQ 9
        Region 0: Memory at fd000000 (32-bit, non-prefetchable)
[size=16M]

I don't think your chip is an M1.  The M1 is limited to 8 Megs of memory
which is on chip and not expandable so I don't see how you can have
16Megs.

It has 8 MiB of RAM.

All Mach64 PCI/AGP variants show 16 MiB of PCI memory space, for up to 8
MiB of video RAM. The second 8 MiB is the big endian aperture.

Gr{oetje,eeting}s,

						Geert

Hallo all,

I'm not understand, what a problem is, who is problem reporter and why
he don't ask me?

I work on this driver for 2.6 kernel and it works good on my ARMADA E500
It's 15" 1400x1050 natural with
ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64)

good means all resolutions, from 320x200 to 1600x1200(that one only on CRT).

Regards Alex

P.S.
If everybody has a problem, please be sure, you use the last code from James's 
fbdev.diff.gz, than switch debug define in atyfb_base.c on and
send me a log.




-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn