Re: [PATCH v6 01/17] dt-bindings: rtc: renesas,rzn1-rtc: Add RZ/T2H and RZ/N2H support

From
sashiko-bot@kernel.org
Date
2026-08-21 21:19:55
Also in
linux-rtc
Reply to
Prabhakar, 2026-08-21
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Add compatible strings for the RTC block found on the Renesas RZ/T2H
(R9A09G077) and RZ/N2H (R9A09G087) SoCs.

These SoCs integrate a closely related variant of the RZ/N1 RTC IP.
Unlike RZ/N1, they do not implement the RTCA0SUBU register. This is
not a limitation for Linux support, as these registers are not used
when the RTC operates in "scmp" clock mode, which is required on
RZ/T2H and RZ/N2H due to their 195.3 kHz input clock.

The RZ/T2H RTC variant also supports a 1Hz output signal on the
RTCAT1HZ pin, controlled by the RTCA0CTL1[RTCA01HZE] bit. This bit is
marked as reserved in the RZ/N1 hardware manual.

Update the binding schema to require the additional clock inputs used by
these SoCs.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Sashiko has reviewed this patch and found no issues. It looks great!

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260821211032.13554-1-prabhakar.mahadev-lad.rj@bp.renesas.com?part=1
Thread (38 messages) 38 messages, 4 authors, last reply 2026-08-23
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help