Re: [PATCH v6 11/17] rtc: rzn1: Dynamically calculate synchronization delay based on clock rate

From
sashiko-bot@kernel.org
Date
2026-08-21 21:16:53
Also in
linux-rtc
Reply to
Prabhakar, 2026-08-21
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Replace the hardcoded hardware synchronization delays with a calculated
time window derived from the operating sub-clock frequency.

The driver currently hardcodes microsecond ranges assuming a fixed
sub-clock frequency of 32.768 kHz. Newer SoC variants, such as the
RZ/T2H, drive this hardware block using a much faster clock rate
(~195.3 kHz). Hardcoding these wait windows forces faster blocks to
over-sleep, introducing unnecessary delays during clock initialization
and register configuration.

Calculate the duration of the required clock cycles in microseconds based
on the runtime clock rate, and store this value in the driver private
structure to adjust the usleep_range() and readl_poll_timeout() boundaries
dynamically.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Sashiko has reviewed this patch and found no issues. It looks great!

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260821211032.13554-1-prabhakar.mahadev-lad.rj@bp.renesas.com?part=11
Thread (38 messages) 38 messages, 4 authors, last reply 2026-08-23
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help