On 06/01/2026 09:39, Wenmeng Liu wrote:

Enable IMX577 via CCI on Taloss EVK Core Kit.

The Talos EVK board does not include a camera sensor
by default, this overlay reflects the possibility of
attaching an optional camera sensor.
For this reason, the camera sensor configuration is
placed in talos-evk-camera.dtso, rather than
modifying the base talos-evk.dts.

I'm not sure how many headers there are on this board but could you 
include in the commit log which one of those ports the sensor should be 
attached to.

As I look at the RB5 board for example we have CAM1, CAM2 where as it 
happens CAM2 == imx577 for that mezzanine.

---
bod